د یوټیلیټیک GYQ27-W حرکت سینسر لارښوونې لارښود

محصول پای ته ورسیدview

The Utilitech GYQ27-W is a white wire-in replacement motion sensor designed for outdoor lighting applications. It provides automatic light control by detecting motion and activating the light for a set duration. This sensor offers wide coverage and includes features for energy efficiency and manual override.

شکل 1: مخکی view of the Utilitech GYQ27-W White Wire-in Replacement Motion Sensor. The sensor features a compact, white housing with a translucent detection lens at the front and a threaded base for wire-in installation.

کلیدي ځانګړتیاوې

• د رڼا اتومات کنټرول: Turns lights on when motion is detected.
• د تنظیم وړ ټایمر: Light remains on for 1, 3, or 10 minutes after motion ceases, with a 5-second test mode.
• پراخ پوښښ: Provides up to 240° coverage and 69-ft of downward perimeter protection.
• له ماښام څخه تر سهاره پورې سینسر: Automatically activates at dusk and deactivates at dawn.
• پراخه مطابقت: Compatible with dimmable LED, dimmable CFL, halogen, and incandescent bulbs.
• د انرژي موثریت: Features 2-level brightness technology.
• لاسي بیارغونه: Allows the light to operate constantly for a selected period.

تنظیم او نصب کول

Proper installation is crucial for optimal performance and safety. It is recommended to consult a qualified electrician if you are unsure about any steps.

د خوندیتوب احتیاطونه

• تل د نصب یا خدمت کولو دمخه په سرکټ بریکر کې بریښنا بنده کړئ.
• Ensure wiring connections are secure and comply with local electrical codes.
• د اعظمي واټ څخه ډیر مه کوئtage rating of the connected lighting fixture.

د نصبولو پړاوونه

1. د بریښنا بندول: Locate the circuit breaker controlling the outdoor light fixture and switch it to the OFF position. Verify power is off using a voltage ټیسټر.
2. Remove Existing Sensor (if applicable): Carefully disconnect the wiring from the old motion sensor or light fixture.
3. د تار نښلول: Follow the wiring diagram provided with your specific light fixture. Typically, this involves connecting the sensor's wires (line, load, neutral) to the corresponding wires from the power supply and the light fixture. Ensure all connections are tight and insulated with wire nuts.
4. د ماونټ سینسر: Securely mount the Utilitech GYQ27-W motion sensor to the desired location. Ensure it has a clear line of sight to the area you wish to monitor.
5. د بریښنا بیرته راګرځول: Once all connections are secure and the sensor is mounted, turn the power back on at the circuit breaker.

عملیاتي لارښوونې

The GYQ27-W motion sensor offers several adjustable settings to customize its operation.

د ترتیباتو تنظیم کول

• د وخت ترتیب: The sensor allows you to set the duration the light remains on after motion is detected. Common settings are 1, 3, or 10 minutes. Refer to the sensor's physical controls for specific adjustment methods (e.g., dial, switch).
• د ازموینې حالت: A 5-second test mode is available for initial setup and aiming. In this mode, the light will turn on for approximately 5 seconds each time motion is detected, regardless of the set time.
• له ماښامه تر سهاره پورې ځانګړتیا: The integrated photocell automatically prevents the light from activating during daylight hours, conserving energy. The sensor will only activate the light when ambient light levels fall below a certain threshold.
• د حساسیت سمون: Some models may include a sensitivity dial to adjust the range or sensitivity of motion detection. Adjust this to prevent false triggers from small animals or distant objects.

لاسي اوورډ

To keep the light on continuously for a period, you can typically activate the manual override function. This is often done by quickly turning the light switch OFF and then ON within a few seconds. The light will then stay on until the override period expires or the switch is cycled again. Consult the specific instructions that came with your sensor for precise manual override steps.

ساتنه

The Utilitech GYQ27-W motion sensor requires minimal maintenance to ensure long-term performance.

• پاکول: په دوره یي ډول د سینسر لینز د نرم، d سره پاک کړئamp د دوړو، خاورې یا کوږوالي د لرې کولو لپاره ټوکرwebs that may obstruct the sensor's view. Do not use abrasive cleaners.
• معاینه: Annually inspect the wiring and mounting for any signs of wear, damage, or loosening. Ensure the sensor is still securely positioned.
• د چاپیریال عوامل: Keep the area around the sensor clear of obstructions like tree branches or tall shrubs that could block the detection field or cause false triggers due to wind movement.

د ستونزو حل کول

If your Utilitech GYQ27-W motion sensor is not functioning as expected, refer to the following common issues and solutions:

مشخصات

تضمین او ملاتړ

Information regarding specific warranty terms for the Utilitech GYQ27-W motion sensor is not provided in this manual. For warranty details, technical support, or replacement parts, please refer to the original product packaging or contact Utilitech customer service directly.

You may also visit the official Utilitech webد خورا تازه معلوماتو او ملاتړ سرچینو لپاره سایټ.