Kramer TAVOR-8-SUB

د کرامر ټاور-۸-سب ځواکمن سب ووفر لارښوونې لارښود

Model: TAVOR-8-SUB

1. پیژندنه

This manual provides essential information for the proper installation, operation, and maintenance of your Kramer TAVOR-8-SUB Powered Subwoofer. Please read this manual thoroughly before using the product to ensure optimal performance and safety. The TAVOR-8-SUB is designed to reproduce low-range audio frequencies, enhancing the audio experience in various environments.

2. د خوندیتوب لارښوونې

  • د بریښنا سرچینه: Only connect the subwoofer to a power source as specified in the specifications section. Ensure the voltage ستاسو د سیمې سره مطابقت لري.
  • وینټیلیشن: د هوا د تودېدو هیڅ لاره مه بندوئ. د یونټ شاوخوا کافي هوا جریان ډاډمن کړئ ترڅو د ډیر تودوخې مخه ونیول شي.
  • اوبه او رطوبت: Do not expose the subwoofer to rain, moisture, or excessive humidity. This product is not waterproof.
  • پاکول: Disconnect the power cord before cleaning. Use a dry, soft cloth. Do not use liquid cleaners or aerosol cleaners.
  • خدمت کول: د دې محصول پخپله خدمت کولو هڅه مه کوئ. ټول خدمتونه وړ خدماتي پرسونل ته راجع کړئ.
  • ځای په ځای کول: Position the subwoofer on a stable surface or mount it securely according to the instructions to prevent it from falling.

3. د بسته محتويات

ډاډ ترلاسه کړئ چې لاندې ټول لیست شوي توکي ستاسو د محصول په بسته بندۍ کې شتون لري:

  • Kramer TAVOR-8-SUB Powered Subwoofer
  • د بریښنا تار
  • د لارښود لارښود (دا سند)
  • Mounting Hardware (if applicable for specific mounting options)

4. محصول ختم شوview

مخکی view of the Kramer TAVOR-8-SUB Powered Subwoofer, showing the 8-inch woofer port.

شکل 1: مخ/اړخ View. This image displays the compact, rectangular enclosure of the TAVOR-8-SUB, featuring a prominent circular port for the 8-inch woofer on one side. The design is clean and minimalist, suitable for discreet placement.

Rear panel of the Kramer TAVOR-8-SUB Powered Subwoofer, showing input/output ports, volume, and crossover controls.

شکل 2: Rear Panel. This image shows the rear of the subwoofer, detailing the control panel. Visible components include RCA input/output jacks, a volume knob, a crossover frequency adjustment knob, a phase switch, a power switch, and the AC power inlet. Safety warnings are also present on the panel.

5. ترتیب کول

5.1 ځای په ځای کول او نصب کول

The TAVOR-8-SUB offers versatile placement options:

  • د فرش غره: Place the subwoofer on a stable, level surface. Ensure it is not obstructing pathways or ventilation.
  • وال ماونټ: The unit can be mounted on a wall. Use appropriate mounting hardware (not always included, check package contents) and ensure the wall structure can support the subwoofer's weight (8 pounds). Follow local building codes and safety guidelines for wall mounting.
  • Next to Wall: The design allows for discreet placement next to a wall, potentially hiding the control panel for a cleaner aesthetic.

5.2 نښلول

The TAVOR-8-SUB uses RCA connectivity for audio input.

  1. Locate the RCA input jacks on the rear panel of the subwoofer (refer to Figure 2).
  2. Connect an RCA audio cable from the subwoofer output of your audio receiver or amplifier to the RCA input on the TAVOR-8-SUB.

5.3 د بریښنا نښلول

  1. ډاډ ترلاسه کړئ چې د سب ووفر بریښنا سویچ په بند حالت کې دی.
  2. Connect the provided power cord to the AC power inlet on the rear panel of the subwoofer.
  3. د بریښنا د تار بله پای په مناسب بریښنایی پلورنځي کې ولګوئ.

6. عملیاتي لارښوونې

6.1 Initial Power-Up and Basic Operation

  1. After connecting all cables, switch the power button on the rear panel to the ON position.
  2. Start with the VOLUME knob set to its minimum position.
  3. Begin playing audio through your main audio system.
  4. Slowly increase the VOLUME knob on the TAVOR-8-SUB until the desired bass level is achieved.

6.2 Adjusting Crossover Frequency

The TAVOR-8-SUB features an adjustable crossover frequency to seamlessly integrate with your main speakers.

  • The CROSSOVER knob allows you to set the upper frequency limit at which the subwoofer will operate.
  • If your main speakers are small, set the crossover frequency higher (e.g., 80-100 Hz) to allow the subwoofer to handle more of the mid-bass frequencies.
  • If your main speakers are larger and can reproduce lower frequencies, set the crossover frequency lower (e.g., 50-60 Hz).
  • Experiment with the setting to find the best blend between the subwoofer and your main speakers, aiming for a smooth transition without a noticeable gap or overlap in sound.

6.3 پړاو کنټرول

The phase switch (0°/180°) helps to ensure that the subwoofer's sound waves are in sync with your main speakers, preventing cancellation or reinforcement issues at the crossover point.

  • Listen to music with strong bass content.
  • Toggle the phase switch between 0° and 180°.
  • Select the position that results in the most impactful and coherent bass response.

6.4 Auto Standby Feature

The TAVOR-8-SUB includes an auto standby feature. If no audio signal is detected for a period, the subwoofer will automatically enter a low-power standby mode. It will automatically power on when an audio signal is detected again.

6.5 Bass Boost Feature

This subwoofer includes a Bass Boost feature to enhance low-frequency output. Refer to the rear panel controls (Figure 2) for the specific switch or knob to activate and adjust this feature, if available as a user-adjustable control.

7. ساتنه

  • پاکول: Regularly wipe the exterior of the subwoofer with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents.
  • وینټیلیشن: ډاډ ترلاسه کړئ چې د هوا د بهېدو دروازې له دوړو او کثافاتو څخه پاکې وي.
  • معاینه: د بریښنا تار او آډیو کیبلونه په دوره یي ډول د زیان نښې وګورئ. زیانمن شوي کیبلونه سمدلاسه بدل کړئ.

8. ستونزه حل کول

ستونزهاحتمالي لاملد حل لاره
د سب ووفر څخه غږ نشته
  • بریښنا نه تړل شوې یا نه چلول شوې
  • Audio cable loose or faulty
  • حجم ډیر ټیټ دی
  • Auto standby active
  • Check power cord and power switch
  • Ensure RCA cable is securely connected
  • Increase subwoofer volume
  • Play audio to activate from standby
تحریف شوی یا ناڅرګند باس
  • حجم ډیر لوړ دی
  • Crossover frequency incorrect
  • د پړاو بې اتفاقي
  • Reduce subwoofer volume
  • Adjust crossover frequency
  • Toggle phase switch (0°/180°)
سب ووفر غږ کوي
  • د ځمکې د لوپ ستونزه
  • ناقص کیبل
  • Try plugging into a different outlet or using a ground loop isolator
  • Replace audio cable

9. مشخصات

فیچرتفصیل
د ماډل شمیرهTAVOR 8-SUB
برانډکرمر
د سپیکر ډولSubwoofer, Surround Sound, Woofer
د Subwoofer قطر۷۸۷ انچه
شاوخوا د غږ چینل ترتیب کول1.0
د ارتباط ټیکنالوژيRCA
د آډیو وتلې حالتسټیریو
د بریښنا سرچینهد بریښنا تار شوی
د نصب کولو ډولد فرش غر، دیوال غر
ځانګړی ځانګړنهباس بوسټ
د توکي وزن۲.۴۵ پونډه
د اوبو د مقاومت کچهد اوبو مقاومت نلري
ASINB07DVT172C
نیټه لومړی شتون لريد ۲۰۲۳ کال د جون ۱۹

10. د تضمین معلومات

Kramer products are designed and manufactured to high-quality standards. For specific warranty terms and conditions applicable to your TAVOR-8-SUB Powered Subwoofer, please refer to the warranty card included with your product or visit the official Kramer Electronics webسایټ. د تضمین پوښښ معمولا د پیرود نیټې څخه د یوې ټاکلې مودې لپاره د عادي استعمال لاندې موادو او کاریګرۍ نیمګړتیاوې شاملې دي.

11. ملاتړ

If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact Kramer Electronics customer support. You can find contact information, including phone numbers and email addresses, on the official Kramer Electronics webسایټ (www.kramerav.com). Please have your product model number (TAVOR-8-SUB) and purchase details ready when contacting support.

اړوند اسناد - TAVOR-8-SUB

مخکېview د کرامر PN-6P چټک پیل لارښود: نصب او تنظیم کول
د کرامر PN-6P 6.5 انچه دوه طرفه غیر فعال پینډنټ سپیکر نصب او تنظیم کولو لپاره لنډ لارښود. د پیک کولو، نصبولو، تار لګولو او کلیدي ځانګړتیاو پوښښ کوي.
مخکېview کرامر VM-8HN 1:8+2 HDMI لوپینګ DA کارن لارښود
د کرامر VM-8HN 1:8+2 HDMI لوپینګ DA لپاره جامع کارونکي لارښود، چې نصب، اتصال، عملیات، تخنیکي مشخصات، او پروتوکول امرونه پوښي.
مخکېview کرامر WM-6P دوه طرفه دیوال نصب شوی غیر فعال سپیکر کارونکي لارښود
د کرامر WM-6P 6.5 انچه دوه طرفه دیوال نصب شوي غیر فعال سپیکر لپاره جامع کارونکي لارښود. د سوداګریزو آډیو غوښتنلیکونو لپاره نصب کول، تارونه (8-ohm، 70V/100V)، تخنیکي مشخصات، او د SPL محاسبه پوښي.
مخکېview د کرامر CL-6D ډانټ چت سپیکر د چټک پیل لارښود
د کرامر CL-6D PoE ځواک لرونکي ډینټ سیلینګ سپیکر نصب او کارولو لپاره یوه لنډه لارښود، چې د مسلکي آډیو سیسټمونو لپاره د ان باکس کولو، نصبولو، تارونو او شبکې تنظیم کولو پوښښ کوي.
مخکېview کرامر MTX3-88-PR-PRO 8x8 میټریکس سویچر: د چټک پیل لارښود
د کرامر MTX3-88-PR-PRO په چټکۍ سره تنظیم او چل کړئ، یو 8x8 آل ان ون میټریکس سویچر چې د مسلکي آډیو-ویډیو روټینګ لپاره ډیزاین شوی. دا لارښود د ان باکس کولو، لومړني اړیکو، او اساسي عملیاتو پوښښ کوي.
مخکېview د کرامر WM-8D PoE ډانټ سپیکر د چټک پیل لارښود
د کرامر WM-8D نصبولو او تنظیم کولو لپاره د چټک پیل لارښود، یو 8 انچه، دوه طرفه دیوال نصب شوی PoE ځواکمن ډینټ سپیکر د جوړ شوي DSP، مکسر، او سره ampژوندی کوونکی. د ځانګړتیاوو، نصبولو، او د ډانټې شبکې په اړه زده کړه وکړئ.