Einhell GE-LC 36/35 Li Solo Battery Chainsaw

1. پیژندنه

This manual provides essential instructions for the safe and effective operation, maintenance, and care of your Einhell GE-LC 36/35 Li Solo Battery Chainsaw. Please read this manual thoroughly before using the chainsaw for the first time and keep it for future reference. This product is designed for cutting wood and similar materials.

Image 1.1: The Einhell GE-LC 36/35 Li Solo Battery Chainsaw, showing the main unit and an outline of where the batteries are inserted.

2. د خوندیتوب لارښوونې

د بریښنا وسایلو د چلولو پر مهال تل خوندیتوب ته لومړیتوب ورکړئ. د دې لارښوونو په تعقیب کې پاتې راتلل ممکن د جدي ټپي کیدو یا ملکیت زیان لامل شي.

2.1 عمومي خوندیتوب

• شخصي محافظتي وسایل (PPE) واغوندئ: Always wear safety glasses, hearing protection, gloves, sturdy footwear, and appropriate clothing. A safety helmet with a face shield is recommended.
• د کار ساحه: Ensure the work area is clear of bystanders, children, and pets. Keep the area well-lit and free from obstacles.
• د هوا شرایط: Do not use the chainsaw in rain or damp conditions. Avoid operating in strong winds.
• د بیټرۍ خوندیتوب: Use only recommended Einhell Power X-Change batteries. Do not expose batteries to heat or fire.

۳.۲ د چینسا ځانګړي خوندیتوب

• د کک بیک مخنیوی: Be aware of the kickback danger zone. Avoid cutting with the tip of the guide bar. Maintain a firm grip with both hands.
• د زنځیر بریک: Ensure the chain brake is functional before each use. It is designed to stop the chain quickly in case of kickback.
• مناسب گرفت: تل د زنځیر آری په دواړو لاسونو سره په کلکه ونیسئ، او خپلې ګوتې او لاسونه یې شاوخوا ونیسئ.
• Cutting Position: Maintain a balanced stance. Do not overreach. Cut at waist height or below if possible.

Image 2.1: The chain brake lever, which activates the kickback protection system, shown in the engaged (stop) position.

3. محصول ختم شوview

The Einhell GE-LC 36/35 Li Solo is a powerful cordless chainsaw featuring a brushless motor for extended operation and efficiency. It is part of the Einhell Power X-Change family, requiring two 18V batteries for 36V power.

3.1 کلیدي ځانګړتیاوې

• Brushless Motor: For enhanced power and longer run time.
• Kickback Protection System: Automatically shuts off the saw upon chain lock.
• Oregon Branded Quality Chain and Bar: 14-inch guide bar for reliable cutting performance.
• Tool-free Chain Tension Adjustment: For quick and easy adjustments.
• Automatic Chain Lubrication: Ensures consistent chain oiling during operation.
• Metal Grip Claws: For secure handling and stability during cuts.
• Soft Grip Handle: For comfortable operation.

انځور ۳.۱: نږدې انځور view of the 14-inch Oregon branded chain and guide bar, indicating its quality and low kickback design.

Image 3.2: Detail of the metal grip claws, providing improved stability and control during cutting operations.

4. ترتیب کول

Before operating your chainsaw, ensure it is properly assembled and prepared.

4.1 پیک کول

Carefully remove all components from the packaging. Verify that all parts are present and undamaged. Refer to the parts list in your product documentation for a complete inventory.

4.2 د بیټرۍ نصب کول

The GE-LC 36/35 Li Solo requires two 18V Einhell Power X-Change batteries (not included). Ensure batteries are fully charged before use.

1. Locate the battery compartments on the chainsaw.
2. Slide each charged battery into its respective compartment until it clicks securely into place.
3. د لرې کولو لپاره، په بیټرۍ کې د خوشې کولو تڼۍ فشار ورکړئ او هغه یې وباسئ.

Image 4.1: Hands demonstrating the correct method for inserting a Power X-Change battery into the chainsaw's battery slot.

Image 4.2: A graphic clearly stating that the battery and charger are not included with the 'Solo' version of the product.

4.3 Chain and Bar Assembly & Tensioning

The chainsaw features tool-free chain tension adjustment.

1. ډاډ ترلاسه کړئ چې د زنځیر بریک خلاص شوی دی.
2. Loosen the side cover knob by turning it counter-clockwise.
3. زنځیر د سپروکټ او لارښود بار شاوخوا کېږدئ، ډاډ ترلاسه کړئ چې د پرې کولو څنډې سم لوري ته مخامخ دي.
4. Fit the guide bar and chain onto the chainsaw body, aligning the bar studs.
5. Tighten the side cover knob slightly.
6. Adjust chain tension by turning the tensioning wheel (usually located near the side cover knob) until the chain is snug against the guide bar but can still be pulled freely by hand. There should be no more than 2-3mm of sag in the middle of the bar.
7. Fully tighten the side cover knob.

Image 4.3: A visual representation of the tool-free chain tensioning mechanism, highlighting the ease of adjustment without additional tools.

۳.۳ د زنځیر د تیلو ډکول

The chainsaw has an automatic chain lubrication system, but the oil reservoir must be filled before use.

1. زنځیر په سطحه کې ځای په ځای کړئ.
2. Unscrew the oil tank cap (refer to Image 4.4).
3. زیرمه د لوړ کیفیت لرونکي زنځیر او بار تیلو سره ډکه کړئ. ضایع شوي تیل یا د موټرو تیل مه کاروئ.
4. کیپ په خوندي ډول بدل کړئ.

Image 4.4: Close-up of the oil tank cap, indicating its location for refilling the automatic chain lubrication system.

5. عملیاتي لارښوونې

د خپل زنځیر آرې د خوندي او مؤثره کارونې لپاره دا ګامونه تعقیب کړئ.

5.1 پیل او ودرول

1. Ensure batteries are installed and chain oil reservoir is full.
2. د زنځیر بریک د مخکینۍ لاستی په لور د لیور په کشولو سره جلا کړئ.
3. Press the safety lock-off button (if present) and then squeeze the trigger switch to start the chainsaw.
4. To stop, release the trigger switch. Engage the chain brake immediately after stopping the cut or when moving between cuts.

۳.۲ د پرې کولو تخنیکونه

• Planning the Cut: Before cutting, assess the wood for stability, potential kickback, and pinch points.
• پرې کول: Allow the chain to reach full speed before contacting the wood. Apply light pressure and let the saw do the work.
• د کوچنیو ونو وهل: For felling, make a directional notch on the side of the desired fall, then make the felling cut from the opposite side, slightly above the notch.
• پړسوب: Work from the bottom up, supporting the branch to prevent pinching.

Image 5.1: A user demonstrating safe operation of the chainsaw, wearing appropriate PPE and cutting a log on a sawhorse.

6. ساتنه

منظم ساتنه غوره فعالیت تضمینوي او ستاسو د زنځیر آرې ژوند اوږدوي.

۵.۲ د زنځیر د فشار تنظیم کول

Check chain tension frequently, especially during initial use. A loose chain can derail, and a tight chain can cause excessive wear. Adjust as described in Section 4.3.

Image 6.1: Close-up of the chain tension adjustment knob, illustrating the mechanism for tool-free chain tensioning.

6.2 زنځیر غوړول

The chainsaw features automatic chain lubrication. Regularly check the oil level in the reservoir and refill as needed (refer to Section 4.4). Ensure the oil port is clear of debris.

Image 6.2: A visual representation of the automatic chain lubrication system, showing oil being dispensed onto the chain during operation.

6.3 پاکول او ذخیره کول

• After each use, remove batteries and clean the chainsaw thoroughly. Remove sawdust and debris from the guide bar, chain, and motor housing.
• زنځیرونه په وچ او خوندي ځای کې وساتئ، د ماشومانو له لاسرسي څخه لرې.
• د زنځیرونو د ذخیره کولو یا لیږدولو پر مهال تل د لارښود بار پوښ وکاروئ.

7. ستونزه حل کول

دا برخه هغه عامې ستونزې په ګوته کوي چې تاسو ورسره مخ کیدی شئ.

If problems persist, contact Einhell customer support or a qualified service technician.

8. مشخصات

Image 8.1: A graphic illustrating the chain speed of 15 meters per second, indicating efficient cutting performance.

9. تضمین او ملاتړ

د تضمین معلوماتو، د محصول ثبتولو، یا تخنیکي ملاتړ لپاره، مهرباني وکړئ رسمي اینهیل ته مراجعه وکړئ webسایټ ته مراجعه وکړئ یا د دوی د پیرودونکو خدماتو څانګې سره اړیکه ونیسئ. د پیرود ثبوت په توګه د پیرود رسید وساتئ.

د نورو مرستو لپاره، لیدنه وکړئ د اینهیل چارواکي webسایټ.