1. پیژندنه
This manual provides instructions for the Sena Universal Helmet Clamp Kit, model SC-A0316, designed for use with Harley-Davidson CB/Audio systems. This kit is compatible with Sena 20S, 20S EVO, and 30K communication systems, enabling wired audio and CB functionality within your helmet.
انځور 1.1: اوورview of the Sena Universal Helmet Clamp Kit, showing the main clamp unit, speakers, microphones, and various cables and mounting accessories.
2. د بسته محتويات
ډاډ ترلاسه کړئ چې ټول توکي ستاسو په کڅوړه کې شتون لري:
- Harley CB Audio Clamp
- Clamp د پوښ اډاپټر
- بوم مایکروفون
- وائرډ بوم مایکروفون
- متحرک سپیکرونه
- د بوم مایکروفون لپاره هک او لوپ فاسټینر
- د مایکروفون سپنج
- د فوم سپیکر پوښونه
- د سپیکرو لپاره هک او لوپ فاسټینرونه
- د سطحي نصب کولو اډاپټر ګلوډ شوی
- الن رنچ
- Speaker Port Cap
- د سپیکر پیډونه
- د ربړ پیډ
- د بوم مایکروفون هولډر
- Hook and Loop Fastener for Holder
- Installing Foam Speaker Cover Sheet
- 7-DIN Harley Cable
3. ترتیب او نصب کول
This section details the installation of the clamp kit components into your helmet.
3.1. د Cl ضمیمه کولamp واحد
د clamp unit secures the main module to your helmet. Choose between the clamp type or the glued surface mounting adapter based on your helmet's design and preference.
- Clamp لګول: په cl کې پیچونه خلاص کړئamp unit using the provided Allen wrench. Slide the clamp between the helmet shell and the inner padding, ensuring a secure fit. Tighten the screws.
- Glued Surface Mounting: Clean the desired mounting area on the helmet surface thoroughly. Peel the backing from the glued surface mounting adapter and firmly press it onto the helmet. Allow sufficient time for the adhesive to cure before attaching the main unit.
Image 3.1: The main clamp unit, which attaches to the side of the helmet.
3.2. د سپیکر نصب کول
Position the speakers inside your helmet's ear pockets for optimal audio clarity.
- کیڼ او ښیې سپیکرونه وپیژنئ.
- Attach the hook and loop fasteners for speakers to the back of each speaker.
- Place the speakers inside the helmet's ear pockets. Ensure they are positioned directly over your ears for the best sound experience. Use speaker pads or rubber pads if needed for proper fit and comfort.
- د سپیکر تارونه د هیلمټ پیډینګ لاندې په ښه توګه د کلپ ته واړوئamp واحد
Image 3.2: The dynamic speakers with their wiring, designed to fit inside helmet ear pockets.
۳. د مایکروفون نصبول
Choose between the boom microphone for open-face helmets or the wired boom microphone for full-face helmets.
- د بوم مایکروفون: Attach the boom microphone holder to the inside of the helmet near your mouth using the hook and loop fastener. Insert the boom microphone into the holder. Apply a microphone sponge for wind noise reduction.
- وایرډ بوم مایکروفون: For full-face helmets, route the wired boom microphone along the helmet's chin bar. Secure it with hook and loop fasteners so the microphone is positioned directly in front of your mouth. Apply a microphone sponge.
- Connect the chosen microphone to the appropriate port on the clamp واحد
Image 3.3: The wired boom microphone, suitable for full-face helmets.
3.4. Connecting to Harley-Davidson CB/Audio
Use the provided 7-DIN Harley cable to connect the clamp unit to your motorcycle's CB/Audio system.
- Locate the 7-DIN port on your Harley-Davidson motorcycle.
- Connect one end of the 7-DIN Harley cable to the clamp واحد
- Connect the other end of the cable to the motorcycle's 7-DIN port.
4. عملیاتي لارښوونې
دا کلیکamp kit facilitates the use of your Sena communication system (20S, 20S EVO, 30K) with your Harley-Davidson's integrated CB and audio system. The operation of the connected Sena unit itself is covered in its respective user manual.
4.1. د آډیو فعالیت
Once connected, audio from your Harley-Davidson's system (e.g., radio, intercom, navigation) will be routed through the helmet speakers. Adjust volume via your motorcycle's controls or the connected Sena unit.
4.2. CB Functionality
The microphone in your helmet will transmit through the motorcycle's CB system. Use your motorcycle's CB controls to manage transmission and reception.
4.3. Intercom (Motorcycle System)
If your Harley-Davidson has an integrated intercom system, this kit allows you to use your helmet's microphone and speakers for communication with a passenger or other connected riders through the motorcycle's system.
5. ساتنه او پالنه
- پاکول: کلپ پاک کړئamp unit and cables with a soft, damp ټوکر سخت کیمیاوي او محلول مه کاروئ.
- Microphone Sponges: Replace microphone sponges periodically to maintain optimal sound quality and hygiene.
- د کیبل معاینه: Regularly inspect all cables for signs of wear, fraying, or damage. Replace damaged cables immediately.
- ذخیره کول: Store the kit in a dry, cool place when not in use.
6. ستونزه حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| له سپیکرو څخه غږ نشته. | Loose connections, incorrect volume settings, damaged speakers/cables. | Check all cable connections. Ensure volume on both the Sena unit and motorcycle is up. Test with another Sena unit or cable if possible. Inspect speakers for damage. |
| مایکروفون نه لیږدول کیږي. | Microphone not connected, incorrect CB settings on motorcycle, damaged microphone. | Verify microphone connection to the clamp unit. Check CB transmission settings on your Harley-Davidson. Ensure microphone is positioned correctly. |
| Poor audio quality (static, low volume). | Loose connections, interference, improperly positioned speakers, worn microphone sponge. | Secure all connections. Ensure speakers are directly over ears. Replace microphone sponge. Check for external interference sources. |
| Clamp unit feels loose. | Screws are loose, improper installation. | کلپ بیا ټینګ کړئamp screws with the Allen wrench. If using the glued adapter, ensure the surface was clean and allowed to cure properly. |
7. مشخصات
| فیچر | تفصیل |
|---|---|
| د ماډل نوم | SC-A0316 |
| د ارتباط ټیکنالوژي | Wired (for Harley-Davidson CB/Audio) |
| مطابقت لرونکې وسیلې | Sena 20S, 20S EVO, 30K communication systems with Harley-Davidson CB/Audio |
| هیډفون جیک | 3.5 mm Jack (internal connection to Sena unit) |
| د آډیو ډرایور ډول | متحرک چلوونکی |
| خنډ | 32 اوم |
| مواد | پلاستیک |
| د توکي وزن | 0.1 کیلوګرامه (3.52 اونس) |
| د محصول ابعاد | 3.94 x 0.79 x 3.15 انچه |
| رنګ | تور |
8. تضمین او ملاتړ
Sena products are manufactured with high-quality materials and craftsmanship. This product is covered by a manufacturer's warranty. For specific warranty details and duration, please refer to the warranty information provided with your original Sena communication system or visit the official Sena webسایټ
د اروپايي اتحادیې د پرزو شتون: Spare parts for this product are available for a duration of 2 years from the date of purchase within the EU.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Sena Customer Service through their official webسایټ یا مجاز توزیع کونکي.
آنلاین سرچینې: For the latest firmware updates, detailed user guides, and support FAQs, please visit the سینا webسایټ.
