پیژندنه
The SONICAKE Black Hammer is a versatile guitar multi-effect pedal designed to provide essential tonal components for metal music. It integrates Boost, Hi-Gain Distortion, Chorus, and Delay effects into a single, compact unit. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Black Hammer pedal to ensure optimal performance.
مخکی view of the SONICAKE Black Hammer Multi-Effect Pedal, showcasing its compact design and integrated controls for various effects.
چمتو کول
Before using your SONICAKE Black Hammer pedal, please follow these steps to ensure proper setup and functionality.
1. د بسته محتويات
- SONICAKE Black Hammer Multi-Effect Pedal
- د کارن لارښود
- د 9V DC بریښنا اډاپټر
2. د بریښنا اړتیاوې
The Black Hammer pedal requires a 9V DC power adapter. Ensure the adapter's polarity is negative center. Using an incorrect power supply may damage the unit and void the warranty.
۲. د پیډل نښلول
- خپل ګیتار سره وصل کړئ INPUT jack on the pedal using a standard 1/4-inch instrument cable.
- سره وصل کړئ OUTPUT د پیډل جیک ستاسو لپاره ampد بل ۱/۴ انچه وسیلې کیبل په کارولو سره د لایفیر ان پټ.
- د ۱۵V DC بریښنا اډاپټر په کې ولګوئ DC 9V input on the pedal and then into a power outlet.
The Black Hammer pedal is shown connected to a guitar and amplifier, illustrating a typical setup for use.
د پیډل چلول
The Black Hammer pedal features four distinct effects, each with intuitive controls and LED indicators for active status.
This image illustrates the four core effects integrated into the Black Hammer pedal: Boost, Hi-Gain Distortion, Chorus, and Delay, each with dedicated controls.
د اغیز ماډلونه:
- بوسټ: This module provides a pre-gain boost to increase the volume and drive of your signal, ideal for pushing your amplifier or the Hi-Gain section for solos and heavy riffs.
- HI-GAIN: An analog high-gain distortion with a versatile 3-band EQ (Bass, Mid, Treble) and a smart Noise Gate (NR) to eliminate unwanted hum and feedback. The Volume knob controls the overall output level of the distortion.
- کورس: A BBD-style analog-sounding chorus effect. Controls include Level (mix of wet/dry signal), Depth (intensity of the chorus effect), and Rate (speed of the chorus modulation).
- ځنډ: A 500ms analog-voicing delay. Controls include Mix (wet/dry signal blend), Repeat (number of repeats), and Time (delay time).
د LED شاخصونه:
Each effect module features LED-illuminated control knobs that clearly indicate their working status. When an effect is active, its corresponding LEDs will light up, providing immediate visual feedback.
Close-up of the pedal's LED-illuminated control knobs, providing clear visual feedback on the active status of each effect, especially useful in low-light conditions.
ریښتینی بای پاس:
The Black Hammer pedal features true bypass switching, ensuring that your guitar's signal remains unaffected when the pedal is disengaged. This preserves your original tone without any coloration or signal degradation.
ساتنه
Proper care and maintenance will extend the lifespan of your SONICAKE Black Hammer pedal.
- پاکول: Use a soft, dry cloth to clean the pedal's surface. Avoid using abrasive cleaners, solvents, or excessive moisture, which can damage the finish or internal components.
- ذخیره کول: When not in use, store the pedal in a dry, cool environment away from direct sunlight and extreme temperatures. Disconnect the power adapter when storing for extended periods.
- اړیکې: Regularly check all input and output jacks for dust or debris. Ensure cables are securely connected to prevent signal loss or intermittent issues.
د ستونزو حل کول
If you encounter issues with your Black Hammer pedal, refer to the following common problems and solutions:
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| نه غږ | Incorrect power supply; loose cable connections; pedal not engaged. | Verify 9V DC power adapter is correctly connected. Check all instrument cables. Ensure the effect is engaged (LEDs lit). |
| Unwanted Noise/Hum | Ground loop; faulty cables; high gain settings. | Use a high-quality isolated power supply. Try different cables. Adjust the Noise Gate (NR) knob on the Hi-Gain section. Reduce gain settings. |
| اغیزې ښکیل نه دي | Footswitch issue; internal fault. | Ensure the footswitch is fully pressed. If the issue persists, contact customer support. |
| کمزوری/تحریف شوی غږ | Incorrect level settings; impedance mismatch. | Adjust the Level/Volume knobs on the pedal. Ensure your amplifier's input impedance is compatible. |
مشخصات
- د توکي وزن: ۷.۹۶ پونډه (۳.۶۲ کیلوګرامه)
- د محصول ابعاد: ۷۱"لیتر x ۲۳.۶"واټه x ۲۴.۴"هوا
- د توکي ماډل شمېره: QCE-10-40
- د سیګنال بmatه: انلاګ
- د بریښنا سرچینه: اډاپټر
- والیtage: 9 ولټه
- اغیزې پکې شاملې دي: Delay, Chorus, Multi Effects, Distortion
تضمین او ملاتړ
SONICAKE products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please visit the official SONICAKE webسایټ ته مراجعه وکړئ یا د دوی د پیرودونکو خدماتو څانګې سره اړیکه ونیسئ. د هر ډول تضمین ادعا لپاره د پیرود ثبوت په توګه د پیرود رسید وساتئ.
