SOBO WP-4000

SOBO WP-4000 Submersible Aquarium Pump Instruction Manual

موډل: WP-4000

1. محصول ختم شوview

The SOBO WP-4000 is a submersible pump designed for use in both fresh and marine water aquariums. It features a fully submersible motor, a long-lasting waterproof design, and a rust-free ceramic shaft, ensuring reliable and quiet operation.

کلیدي ځانګړتیاوې:

  • Suitable for fresh and marine water environments.
  • Fully submersible design.
  • Long-lasting waterproof motor.
  • Equipped with a rust-free ceramic shaft for durability.
SOBO WP-4000 submersible aquarium pump packaging

Image: The SOBO WP-4000 submersible aquarium pump packaging, displaying the product and key features.

2. د خوندیتوب لارښوونې

Please read and understand all safety instructions before operating this pump to prevent injury or damage.

  • تل د پمپ د سمبالولو، نصبولو، یا هر ډول ساتنې ترسره کولو دمخه د بریښنا رسولو قطع کړئ.
  • د حجم ډاډ ترلاسه کړئtage and frequency of your power supply match the specifications listed on the pump's label.
  • Do not operate the pump if the power cord or plug is damaged. Contact a qualified electrician for repair or replacement.
  • This pump is designed for indoor use only and must be fully submerged in water during operation. Never run the pump dry.
  • Keep the pump and its power cord out of reach of children and pets.
  • Avoid pulling the pump by its power cord. Always grasp the plug when disconnecting from the outlet.
  • Do not use the pump in water temperatures exceeding 35°C (95°F).

3. د بسته محتويات

The SOBO WP-4000 package typically includes the following items:

  • 1 x SOBO WP-4000 Submersible Pump with attached power cord
SOBO WP-4000 pump with power cord

Image: The SOBO WP-4000 submersible pump shown with its attached power cord and plug.

4. ترتیب کول

Follow these steps to properly set up your SOBO WP-4000 submersible pump:

  1. ځای په ځای کول: Position the pump securely at the bottom of your aquarium. Ensure the pump is placed on a stable, flat surface. The integrated suction cups on the base can be used to firmly attach the pump to the aquarium glass, preventing movement during operation.
  2. د محصول پیوستون: If you intend to direct the water flow (e.g., to a filter, fountain, or specific area of the tank), connect appropriate tubing (not included) to the pump's outlet nozzle. Ensure the connection is secure to prevent leaks.
  3. ډوبېدل: Ensure the pump is completely submerged in water before connecting it to power. Running the pump dry can cause damage and void the warranty.
  4. بریښنایی پیوستون: With dry hands, plug the pump's power cord into a suitable and grounded electrical outlet. Avoid using extension cords if possible; if necessary, ensure it is rated for outdoor use and has a ground fault circuit interrupter (GFCI).
SOBO WP-4000 pump showing suction cups

انځور: اړخ view of the SOBO WP-4000 submersible pump, illustrating its compact design and suction cups for secure placement.

5. عملیاتي لارښوونې

Operating your SOBO WP-4000 pump is straightforward once it is properly set up.

  1. پاور آن: After ensuring the pump is fully submerged and securely placed, turn on the power at the electrical outlet. The pump will immediately begin to circulate water.
  2. دوامداره عملیات: This pump is designed for continuous operation. Regularly monitor the water level in your aquarium to ensure the pump remains fully submerged at all times.
  3. د جریان سمون: The SOBO WP-4000 typically operates at a fixed flow rate. If your specific model includes a flow adjustment switch or lever, refer to the markings on the pump body for instructions on how to adjust the water flow.

6. ساتنه

Regular cleaning and maintenance are crucial for the optimal performance and extended lifespan of your SOBO WP-4000 pump.

  1. د بریښنا قطع کول: Always unplug the pump from the power source before attempting any cleaning or maintenance.
  2. بې لارې کول: Carefully remove the pump from the water. Detach any connected tubing. Locate and remove the front cover and impeller housing.
  3. Clean the Impeller: Gently remove the impeller assembly. Clean the impeller, its shaft, and the impeller chamber thoroughly with a soft brush or cloth under running water. Remove any accumulated debris, algae, or mineral deposits. Inspect the ceramic shaft for any signs of wear or damage.
  4. Clean the Intake: Clean the intake screen to ensure unrestricted water flow. Blockages can significantly reduce pump efficiency.
  5. بیا یوځای کول: Reassemble the impeller and cover securely. Ensure all parts are correctly seated before placing the pump back into the aquarium.
  6. فریکونسی: Perform cleaning every 2 to 4 weeks, or more frequently if you notice reduced flow or increased noise, depending on the water conditions in your aquarium.

7. ستونزه حل کول

د عامو ستونزو او د هغوی د حل لارو لپاره لاندې جدول ته مراجعه وکړئ.

ستونزهاحتمالي لاملد حل لاره
پمپ پیل نه کويبریښنا نشتهCheck power connection, electrical outlet, and circuit breaker.
پمپ پیل نه کويImpeller jammed or blockedDisconnect power, remove impeller cover, and clean the impeller and chamber.
د اوبو کم جریانClogged intake screen or impellerDisconnect power, clean the intake screen and impeller thoroughly.
د اوبو کم جریانKinked or blocked output tubingCheck and clear any obstructions in the tubing connected to the pump's outlet.
ډیر شور یا وایبریشنImpeller dirty, damaged, or wornDisconnect power, clean or replace the impeller if damaged.
ډیر شور یا وایبریشنPump not securely placedEnsure the pump is firmly seated at the bottom of the aquarium using its suction cups.

If the problem persists after attempting these solutions, please contact customer support or your retailer for further assistance.

8. مشخصات

Technical specifications for the SOBO WP-4000 submersible pump:

فیچرتفصیل
جوړونکیSOBO
د توکي وزن830 ګرامه
د محصول ابعاد15 x 15 x 10 سانتي متره
رنګتور
سټایلد زیرمو وړ
موادپلاستیک
د ځواک سرچینې ډولد بریښنا تار شوی
د واحدونو شمیر1
بیټرۍ پکې شاملې دينه
بیټرۍ ته اړتیا دهنه
ASINB07G5D6XM1
د لومړي شتون نیټهد اپریل 17، 2021
د جوړونکي لخوا بند شوینه
Close-up of SOBO WP-4000 product label with specifications

انځور: نږدې انځور view of the SOBO WP-4000 submersible pump's label, detailing technical specifications such as voltage، واټtage, and flow rate.

9. تضمین او ملاتړ

For warranty information, technical support, or service inquiries regarding your SOBO WP-4000 submersible pump, please refer to the specific warranty policy provided by your retailer or contact SOBO customer service directly. It is recommended to retain your purchase receipt as proof of purchase for any warranty claims.

اړوند اسناد - WP-4000

مخکېview SOBO WP-1000F د ایکویریم داخلي فلټر پمپ - د کارونکي لارښود
د SOBO WP-1000F ایکویریم داخلي فلټر پمپ لپاره تفصيلي لارښوونې او د خوندیتوب معلومات، چې عملیات، ساتنه او فعالیت پوښي.
مخکېview د SOBO SF-1000F-UV ایکویریم بهرنۍ فلټر - محصول پایview
د SOBO SF-1000F-UV ایکویریم بهرني فلټر په اړه معلومات، د ایکویریمونو لپاره د لوړ فعالیت فلټریشن حل.
مخکېview د STAYGROW اتلانتیک لړۍ DC ویو پمپ کارونکي لارښود
د STAYGROW اتلانتیک لړۍ DC ویو پمپ لپاره د کارونکي لارښود، په شمول د WP-2500، WP-4000، WP-10000، او WP-13000 ماډلونه. د خوندیتوب معلومات، مشخصات، هغه څه چې پکې شامل دي، د چټک پیل لارښود، عملیاتي لارښوونې، د ستونزو حل کول، او د تضمین توضیحات پوښي.
مخکېview ENLIGHTEN™ Spectroscopy Software Operator's Manual
Comprehensive operator's manual for Wasatch Photonics ENLIGHTEN™ spectroscopy software, covering installation, hardware compatibility, operation, troubleshooting, and advanced features for collecting and analyzing spectral data.
مخکېview د واټرپیک واټر فلوسر WP-660 لړۍ د چټک پیل لارښود
د واټرپیک واټر فلوسر WP-660، WP-662، WP-663، WP-670، WP-672، WP-673، WP-674، WP-675، او WP-676 ماډلونو لپاره د پیل چټک لارښود. زده کړئ چې څنګه یونټ چمتو کړئ او د اوبو فلوس کولو لپاره یې وکاروئ.