DXQ FL-40GMB12V000001

د DXQ FL-40 لوړ فشار ډایفرام پمپ کارونکي لارښود

Model: FL-40GMB12V000001 | Brand: DXQ

1. پیژندنه

Thank you for choosing the DXQ FL-40 High Pressure Diaphragm Pump. This manual provides essential information for the proper installation, operation, and maintenance of your pump. Please read it thoroughly before use to ensure safe and efficient performance.

DXQ FL-40 High Pressure Diaphragm Pump with clear filter housing

Figure 1: DXQ FL-40 High Pressure Diaphragm Pump

کلیدي ځانګړتیاوې:

  • دوامدار مواد: Constructed from high-strength cast iron with powder coating, ensuring waterproof and rust-resistant properties for long-term use.
  • Powerful Automatic Pressure Pump: A fully automatic self-priming pump with a maximum flow rate of 17 L/min and an inlet PSI set to Max 40PSI (2.76Bar). Operates on 12V AC power.
  • د خوندیتوب خوندیتوب: Features built-in thermal protection and automatic pressure protection. Designed for long service life with quiet operation and no leakage.
  • چټک نصب کول: Compact size, lightweight design, and stable performance facilitate instant assembly.
  • څو اړخیز غوښتنلیکونه: Suitable for various uses including food and beverage filling, liquid transfer, clean machine requirements, road work, and cooling systems.
Collage of various applications for the pump including kitchen sink, water heater, soda dispenser, agricultural drone, pressure washing, and solar water heater

Figure 2: Wide range of applications for the FL-40 pump

2. د خوندیتوب لارښوونې

Always observe the following safety precautions to prevent injury or damage to the pump.

  • ډاډ ترلاسه کړئ چې د بریښنا رسولو د پمپ حجم سره سمون لريtage اړتیاوې (12V).
  • Do not operate the pump with damaged wiring or connections.
  • Avoid running the pump dry for extended periods, as this can cause damage.
  • د عملیاتو په جریان کې د پمپ شاوخوا مناسب هوا ورکول ډاډمن کړئ.
  • Do not use the pump for flammable liquids or in explosive atmospheres.
  • لاسونه او لوڅې جامې له خوځنده برخو لرې وساتئ.
  • د هر ډول ساتنې یا ستونزې حل کولو دمخه بریښنا قطع کړئ.
  • The pump features built-in thermal protection to prevent overheating. If the pump stops unexpectedly, allow it to cool down before restarting.
Diagram showing the internal motor of the pump with an arrow indicating thermal protection

Figure 3: Thermal Protection feature of the pump

3. اجزا شامل دي

The DXQ FL-40 High Pressure Diaphragm Pump package typically includes the following components:

  • 1 x Diaphragm Water Pump
  • 1 x فلټر
  • 3 x Fittings (various types for connection)
تړل view of the included filter and various hose fittings

Figure 4: Included filter and fittings

Labeled diagram of the pump showing water outlet connector, stable bracket, pump wire, and water inlet connector

Figure 5: Key components and connections of the pump

4. ترتیب او نصب کول

Follow these steps for quick and proper installation of your diaphragm pump:

  1. پورته کول: Securely mount the pump in a dry, well-ventilated area using the stable bracket. Ensure it is on a flat, stable surface to minimize vibration.
  2. د مزو تړاو: Connect the water inlet hose to the designated inlet port (often labeled 'Inlet' or indicated by an arrow pointing towards the pump). It is recommended to install the included filter on the inlet line to prevent debris from entering the pump.
  3. د آوټ لیټ پیوستون: Connect the water outlet hose to the designated outlet port (often labeled 'Outlet' or indicated by an arrow pointing away from the pump).
  4. بریښنایی پیوستون: Connect the pump's power wires to a 12V DC power source. Ensure correct polarity (red wire to positive, black wire to negative). It is advisable to install an inline fuse for protection.
  5. Prime the Pump (if necessary): While this is a self-priming pump, ensuring the inlet line is filled with water before the first use can aid in faster priming.
  6. د لیکونو لپاره چیک کړئ: After all connections are made, slowly introduce water into the system and check for any leaks at the fittings. Tighten connections as needed.
Diagram showing the pump connected to inlet and outlet hoses with a filter on the inlet, and an arrow indicating water flow direction

Figure 6: Fast assembly and water flow direction

5. عملیات

Once installed, operating the DXQ FL-40 pump is straightforward:

  • د پمپ پیل کول: Ensure all connections are secure and the power source is ready. Apply 12V DC power to the pump. The pump will begin to operate and self-prime.
  • اتوماتیک عملیات: The pump is designed to automatically turn on when water is demanded (e.g., a faucet is opened) and turn off when the demand stops and pressure builds up in the system.
  • Flow and Pressure: The pump delivers a maximum flow of 17 L/min and maintains pressure up to 40 PSI.
  • څارنه: Periodically check the pump for unusual noises, vibrations, or leaks during operation.

6. ساتنه

منظم ساتنه ستاسو د پمپ اوږد عمر او غوره فعالیت تضمینوي:

  • د فلټر پاکول: Regularly inspect and clean the inlet filter to prevent clogging and maintain optimal flow. Disconnect power, remove the filter housing, clean the mesh screen, and reassemble.
Comparison image showing the included metal filter on the left and a different type of filter on the right

Figure 7: The included metal filter for debris prevention

  • د پیوستون چک: Periodically check all hose and electrical connections for tightness and signs of wear.
  • ژمی کول (که د تطبیق وړ وي): If the pump is used in an environment where temperatures drop below freezing, ensure it is drained completely or protected with RV antifreeze to prevent damage from freezing water.
  • عمومي پاکول: د پمپ بهرنۍ برخه پاکه او له خاورې او کثافاتو څخه پاکه وساتئ.

7. ستونزه حل کول

د عامو ستونزو او د هغوی د حل لارو لپاره لاندې جدول ته مراجعه وکړئ:

ستونزهاحتمالي لاملد حل لاره
پمپ نه چلیږيNo power; Loose wiring; Blown fuse; Motor faultCheck power supply; Secure connections; Replace fuse; Contact support
ټیټ جریان یا فشارClogged inlet filter; Kinked or restricted hose; Air in system; Low voltageClean filter; Straighten hose; Bleed air from system; Check power supply
پمپ په دوامداره توګه پرمخ ځيLeak in system; Pressure switch malfunction; Open faucetCheck for leaks and repair; Contact support for pressure switch; Close all faucets
پمپ شور دیAir in system; Loose mounting; Debris in pumpBleed air; Secure mounting; Disconnect power and inspect pump (if safe)
اوبه له پمپ څخه وځيLoose fittings; Damaged seals/diaphragmTighten fittings; Contact support for seal replacement

8. تخنیکي مشخصات

Detailed specifications for the DXQ FL-40 Diaphragm Pump:

مشخصاتارزښت
جوړونکیBananaB (DXQ)
د ماډل شمیرهFL-40GMB12V000001
د محصول ابعاد۱۰ x ۱۰ x ۱۰ سانتي متره (تقریبا ۳.۹۴ x ۳.۹۴ x ۳.۹۴ انچه)
وزن2.4 کیلوګرام (نږدې 5.3 پونډه)
رنګتور
سټایلډایافرام
موادکاسټ اوسپنه
د بریښنا سرچینه12V DC
والیtage12 ولټه
د اعظمي جریان کچهپه یوه دقیقه کې ۳۰ لیتره
اعظمي فشار40 PSI (2.76 بار)
د پورته کولو اعظمي لوړوالی2 متره
بیټرۍ پکې شاملې دي؟نه
بیټرۍ ته اړتیا ده؟نه
Image showing the dimensions of the pump: 10 inches long, 4.3 inches wide, and 4.3 inches high

Figure 8: Pump dimensions

Close-up of the pump highlighting its cast iron material construction

Figure 9: Durable Cast Iron Material

9. د تضمین معلومات

For specific warranty terms and conditions, please refer to the product packaging or contact the seller/manufacturer directly. Keep your proof of purchase for any warranty claims.

10. د پیرودونکي ملاتړ

If you encounter any issues not covered in this manual or require further assistance, please contact the seller or manufacturer through the platform where you purchased the product. Provide your model number and a detailed description of the issue for faster service.

اړوند اسناد - FL-40GMB12V000001

مخکېview د ۲۰۰۷ کال د نسان فرنټیر د تیلو سیسټم د خدماتو لارښود
د ۲۰۰۷ کال د نیسان فرنټیر لپاره جامع خدمت لارښود، د سونګ توکو سیسټم لپاره د پروسیجرونو توضیحات، په شمول د احتیاطي تدابیرو، چمتووالي، د سونګ توکو ټانک، د سونګ توکو پمپ، د سونګ توکو فلټر، او سینسر واحد. لرې کول، نصب کول، جلا کول، اسمبلۍ، او مشخصات پوښي.
مخکېview د فوجینون لینز ماونټ روټیشن تنظیم کولو لارښود او مشخصات
د فوجینون کیمرې لینز ماونټونو د گردش تنظیم کولو څرنګوالي په اړه مفصل لارښود، په شمول د ګام په ګام لارښوونې او د لینز ماډلونو جامع لیست چې د دوی سینسر اندازې او تورک مشخصات لري.
مخکېview د فینکس اړیکې FL سویچ 1000 لړۍ کارونکي لارښود
دا کارن لارښود د فینکس کانټکټ د FL SWITCH 1000 لړۍ د غیر منظم تنګ ایترنیټ سویچونو لپاره جامع لارښوونې چمتو کوي. دا د خوندیتوب، نصبولو، عملیاتو، تخنیکي معلوماتو، او د مختلفو ماډلونو لپاره د ترتیب کولو په اړه اړین معلومات پوښي، چې په صنعتي شبکې غوښتنلیکونو کې مناسب ځای پرځای کول او کارول ډاډمن کوي.
مخکېview د ټایټس فلو بار معمارۍ لینر ډیفیوزر نصب او عملیاتي لارښود
د ټایټس فلو بار معمارۍ خطي ډیفیوزرونو، ماډلونو FL-10، FL-15، FL-20، FL-25، او FL-30 لپاره جامع نصب او عملیاتي لارښود. سخت چت، صوتي چت، او د ساحې پرې کولو پروسیجرونه پوښي.
مخکېview د ټایټس فلو بار د نصبولو هارډویر: کلپونه، هنګرونه، او د مطابقت لارښود
د ټایټس فلو بار نصبولو هارډویر لپاره جامع لارښود، په شمول د UHC، USH، H1-H5، WC3، WC4، SS1، او SC1 کلپونه. د HVAC نصبولو لپاره تفصيلي توضیحات، ډیاګرامونه، او د مطابقت چارټونه وړاندې کوي.
مخکېview د ویور ګالف نیټ FL-004/FL-05/FL-05A/FL-P255 د کارونکي لارښود او تضمین
د ویور ګالف نیټ ماډلونو FL-004، FL-05، FL-05A، او FL-P255 لپاره جامع لارښود. د خوندیتوب خبرداری، د راټولولو لارښوونې، پاکول، د ذخیره کولو لارښوونې، او د تضمین معلومات پکې شامل دي.