1. پیژندنه او وروستهview
The Laserliner CoatingTest-Master 082.150A is a precision instrument designed for non-destructive measurement of coating thicknesses on various metal surfaces. It utilizes both magnetic induction and eddy current principles to accurately determine the thickness of non-metallic layers.
This device is capable of measuring non-magnetic coatings such as paint and zinc on steel, as well as insulating coatings like paint and anodized layers on non-ferrous metals. It features automatic identification of the base material (ferrous/ferromagnetic or non-ferrous/non-ferromagnetic), an internal memory for 400 measured values, and options for one-point and two-point calibration. Data transfer and evaluation are facilitated via a USB interface. The illuminated display provides Min/Max/Avg readings for comprehensive analysis.
Figure 1: Laserliner CoatingTest-Master 082.150A device.
2. د بسته محتويات
د کڅوړې د پرانیستلو پر مهال، مهرباني وکړئ تصدیق کړئ چې لاندې ټول توکي پکې شامل دي:
- Laserliner CoatingTest-Master 082.150A device
- د محافظتي بار وړلو قضیه
- د معلوماتو لیږد لپاره USB کیبل
- Calibration foils/plates (for one-point and two-point calibration)
- لارښود لارښود (دا سند)
- Software CD (for data evaluation)
- بیټرۍ (که شامل وي)
Figure 2: Contents of the CoatingTest-Master package.
3. ترتیب کول
3.1 د بیټرۍ نصب کول
The CoatingTest-Master requires batteries for operation. Locate the battery compartment on the back of the device. Insert the specified battery type (e.g., AAA batteries) ensuring correct polarity as indicated inside the compartment. Close the battery cover securely.
3.2 بریښنا کول / بندول
فشار ورکړئ او ونیسئ ځواک button (usually marked with a power symbol 🏻) to turn the device on. The display will illuminate. To turn off the device, press and hold the ځواک تڼۍ بیا تر هغه وخته پورې فشار ورکړئ تر څو چې ښودنه بنده شي.
4. عملیاتي لارښوونې
۷.۱ اساسي اندازه ګیري
To perform a basic coating thickness measurement:
- ډاډ ترلاسه کړئ چې وسیله فعاله ده.
- Place the small measuring head firmly and perpendicularly onto the surface to be measured. The device will automatically detect the base material (ferrous or non-ferrous).
- The coating thickness reading will be displayed on the screen in micrometers (µm).
- Lift the measuring head from the surface to prepare for the next measurement.
Figure 3: The device features a small measuring head for pinpoint accuracy.
4.2 اندازه کول
For accurate measurements, especially when measuring different types of coatings or base materials, calibration is essential. The CoatingTest-Master supports one-point and two-point calibration.
4.2.1 یو ټکی کیلیبریشن
This method uses a single known thickness to adjust the device. Refer to the on-screen prompts or specific manual section for detailed steps on using the provided calibration foils.
4.2.2 دوه ټکي کیلیبریشن
This method uses two known thicknesses (e.g., zero and a specific thickness) for more precise calibration across a range. Follow the device's on-screen instructions for this procedure.
4.3 د معلوماتو مدیریت
The device has an internal memory for up to 400 measured values. Use the navigation buttons to review stored data. To transfer data to a computer, connect the device via the provided USB cable and use the accompanying software for evaluation.
4.4 د دندو ښودل
The illuminated display shows the current measurement, and can also cycle through Minimum (Min), Maximum (Max), and Average (Avg) values of a series of measurements. Consult the device's on-screen menu for accessing these display modes.
5. ساتنه
Proper maintenance ensures the longevity and accuracy of your CoatingTest-Master.
- پاکول: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the measuring head is kept clean and free of debris.
- ذخیره کول: When not in use, store the device in its protective carrying case in a dry, dust-free environment, away from extreme temperatures and direct sunlight.
- د بیټرۍ بدلول: Replace batteries promptly when the low battery indicator appears on the display to avoid interruption of measurements and potential data loss.
6. ستونزه حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| وسیله فعاله نه ده. | مړه یا په غلط ډول نصب شوي بیټرۍ. | د بیټرۍ قطبیت وګورئ؛ بیټرۍ بدل کړئ. |
| ناسم لوستل. | Device not calibrated; dirty measuring head; incorrect measurement technique. | Perform calibration; clean measuring head; ensure proper contact with surface. |
| USB data transfer failure. | Incorrect cable connection; software not installed or running; driver issues. | Ensure secure USB connection; install/reinstall software and drivers; try a different USB port. |
7. مشخصات
| فیچر | تفصیل |
|---|---|
| د اندازه کولو اصول | Magnetic Induction (FE) / Eddy Current (NFe) |
| Measuring Range (FE) | 0 – 1250 µm |
| Accuracy (FE) | 0–850 µm: ±(3% + 1 µm); 850–1250 µm: ±5% |
| Measuring Range (NFe) | 0 – 1250 µm |
| Accuracy (NFe) | 0–850 µm: ±(3% + 1 µm); 850–1250 µm: ±5% |
| د بنسټیزو موادو پیژندنه | Automatic (Ferrous / Non-Ferrous) |
| حافظه | 400 اندازه شوي ارزښتونه |
| کیلیبریشن | One-point and Two-point |
| انٹرفیس | USB |
| ښودل | Illuminated, Min/Max/Avg display |
8. تضمین او ملاتړ
Laserliner products are manufactured with high quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official Laserliner webسایټ. د هر ډول تضمین ادعا لپاره د پیرود ثبوت په توګه د پیرود رسید وساتئ.
For further assistance, you may contact Laserliner customer service through their official channels. Contact details are typically available on the manufacturer's webسایټ یا د محصول بسته بندي کې.
