Amico 3 Head LED Security Light with Motion Sensor (Model PD-1711)

1. پیژندنه

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Amico 3 Head LED Security Light with Motion Sensor. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and adherence to safety guidelines are crucial for optimal performance and user safety.

د خوندیتوب معلومات

• تل د نصب یا خدمت کولو دمخه په سرکټ بریکر کې بریښنا بنده کړئ.
• Installation should be performed by a qualified electrician or a person familiar with the construction and operation of the product and the hazards involved.
• ډاډ ترلاسه کړئ چې ټول بریښنایی اړیکې د سیمه ایزو کوډونو او مقرراتو سره مطابقت لري.
• په هغو سطحو مه نصب کوئ چې له ساختماني پلوه سم نه وي.
• کله چې روښانه شي نو د LED رڼا سرچینې ته په مستقیم ډول د کتلو څخه ډډه وکړئ.

2. د محصول ب Featuresې

The Amico 3 Head LED Security Light is designed for outdoor use, offering adjustable lighting and motion detection capabilities.

• High Brightness & Energy Efficiency: Outputs 40W, 4000 Lumens, 5000K (Daylight White) equivalent to 200W halogen light, reducing electricity consumption.
• د رڼا کولو درې طریقې: Features Motion Detection, Dusk-to-Dawn (D2D), and Always-On modes for versatile operation.
• Adjustable Motion Sensor: 180-degree swiveling angle with a detection distance of up to 75 feet.
• دوامدار او د هوا ضد: IP65 waterproof rating protects against rain, sleet, or snow. Constructed with aluminum for excellent heat dissipation and extended lifespan.
• د تنظیم وړ رڼا سرونه: Three independently adjustable light heads allow for broad and customized light coverage.

3. د بسته محتويات

د نصبولو پیل کولو دمخه ډاډ ترلاسه کړئ چې ټولې برخې شتون لري:

• Amico 3 Head LED Security Light Unit
• د خولو لگول
• د سکرو نصب کول
• د سیم مغزونه
• EVA Pad (for waterproofing)
• د لارښوونې لارښود

4. د نصبولو لارښوونې

Follow these steps for a secure and functional installation. Ensure power is OFF at the circuit breaker before starting.

1. د پورته کولو سطح چمتو کړئ: Ensure the junction box is securely installed and accessible.
2. د نصب کولو بریکٹ نصب کړئ: Fasten the provided mounting bracket to the existing junction box using the supplied screws. Ensure it is firmly attached.
3. Pass Wires Through EVA Pad: Carefully thread the electrical wires from the light fixture through the center hole of the EVA pad. This pad helps create a waterproof seal.
4. د تار نښلول: Connect the wires from the light fixture to the corresponding wires from the junction box using the wire nuts.
   • Green wire (from light) to Green wire (ground from junction box)
   • Black wire (from light) to Black wire (hot from junction box)
   • White wire (from light) to White wire (neutral from junction box)

   Note: Improper wiring may cause the light to be slightly bright even when off.
5. د رڼا فکسچر نصب کړئ: Align the light fixture with the mounting bracket. Pass the screw through the hole on the light body, align with the hole in the mounting bracket, and tighten securely.
6. Seal the Hole: Block the screw hole with the provided rubber plug to maintain the light's waterproof integrity.
7. د رڼا سرونه او سینسر تنظیم کړئ: Adjust the three light heads and the motion sensor to your desired angles for optimal coverage.

د نصبولو ویډیو لارښود

5. عملیاتي طریقې

The Amico Security Light offers three distinct operating modes, controlled by switches and dials on the motion sensor unit. Refer to the diagram below for control locations.

د حالت ترتیبات:

• د حرکت کشف حالت: The light activates when motion is detected within its range and turns off after a set time. Adjust the 'DISTANCE' dial to H (High), M (Medium), or L (Low) for sensitivity, and the 'TIME' dial to 1, 3, or 10 minutes for illumination duration.
• له ماښام څخه تر سهاره (D2D) حالت: The light automatically turns on at dusk and off at dawn. To activate, set the 'DISTANCE' dial to 'D2D' and the 'TIME' dial to your desired duration (1, 3, or 10 minutes). The light will remain on for the set duration after dusk.
• تل په حال کې حالت: For continuous illumination, set the 'DISTANCE' dial to 'D2D' and the 'TIME' dial to 'TEST'. The light will remain on until manually switched off or the settings are changed. This mode can also be controlled by a wall switch.

Operating Modes Video Guide

6. ساتنه

Regular maintenance ensures the longevity and optimal performance of your security light.

• پاکول: Periodically clean the light heads and motion sensor lens with a soft, damp ټوکر د کثافاتو پاکوونکي یا محلول مه کاروئ.
• معاینه: Annually inspect the wiring and mounting for any signs of wear, damage, or loose connections. Ensure the waterproof seals are intact.
• د چاپیریال عوامل: Keep the motion sensor clear of obstructions like tree branches or debris that could interfere with its detection capabilities.

7. ستونزه حل کول

If you encounter issues with your Amico Security Light, refer to the following common problems and solutions:

8. مشخصات

9. د تضمین معلومات

The Amico 3 Head LED Security Light (Model PD-1711) comes with a 5-year limited warranty. For specific terms and conditions, please refer to the warranty card included in your product packaging or contact Amico customer support.

10. د پیرودونکي ملاتړ

For any questions, technical assistance, or warranty claims, please contact Amico customer support through the official Amico webسایټ یا ستاسو د محصول په بسته بندۍ کې چمتو شوي د اړیکو معلومات.