1. پیژندنه
This manual provides essential information for the safe and effective operation of the Yaskawa V1000 Series CIMR-VU4A0004FAA SERVO Drive. This industrial drive is designed for precise motor control applications, featuring a 3-phase input voltage range of 380-480V AC and an output voltage range of 0-480V AC, delivering 2 HP of power. Please read this manual thoroughly before installation, operation, or maintenance.
Figure 1.1: The Yaskawa V1000 SERVO Drive as packaged, including the drive unit, documentation, and a software CD.
2. د خوندیتوب معلومات
Always observe the following safety precautions to prevent injury or damage to equipment. This device operates with high voltages and currents that can be lethal.
- د بریښنا شاک خطر: Ensure all power is disconnected and verified before performing any installation, wiring, or maintenance. Wait at least 5 minutes for capacitor discharge after disconnecting power.
- د ګرمې سطحې خبرداری: The heatsink and other components can become extremely hot during operation. Avoid direct contact to prevent burns.
- وړ پرسونل: Installation, wiring, and maintenance should only be performed by qualified and trained personnel.
- ځمکني کول: To conform to CE requirements, ensure the supply neutral is properly grounded for 400V class systems.
- د چاپیریال شرایط: Install the drive in an environment free from excessive dust, moisture, corrosive gases, or direct sunlight.
شکل 2.1: اړخ view of the drive, highlighting the heatsink and warning labels regarding hot surfaces and electric shock.
3. ترتیب او نصب کول
Proper installation is critical for the performance and longevity of the SERVO drive.
3.1 فزیکي نصب کول
Mount the drive vertically on a flat, stable surface, ensuring adequate clearance for ventilation. The drive dimensions are approximately 8.25 x 7.5 x 7 inches and it weighs 4.8 pounds.
شکل 3.1: پورته view of the drive, illustrating the heatsink fins designed for heat dissipation.
3.2 تارونه
Connect the input power, motor, and control signals according to the wiring diagrams provided in the full product manual. Ensure correct phase sequence and proper grounding.
- د ننوتلو ځواک: 380-480V AC, 3-Phase.
- د تولید ځواک: 0-480V AC, 3-Phase.
- ځمکني کول: Connect the protective earth (PE) terminal to a reliable ground point.
شکل 3.2: لاندې view of the drive, showing the main power and motor connection terminals.
4. عملیاتي لارښوونې
The V1000 drive features an intuitive control panel for monitoring and basic operation.
4.1 د کنټرول پینلview
The front panel includes a digital display, navigation buttons (ESC, UP, DOWN, LEFT, RIGHT, ENTER), and dedicated RUN/STOP buttons.
شکل 4.1: مخکی view of the drive, detailing the control panel with its display and operational buttons.
4.2 بنسټیز عملیات
- پاور آن: After ensuring all wiring is correct and safe, apply input power. The display will illuminate.
- د پیرامیټر ترتیب: Use the navigation buttons to access and adjust operational parameters as required for your application. Refer to the comprehensive programming manual for detailed parameter descriptions.
- پیل / ودرول: فشار ورکړئ چلول button to start the motor. Press the ودروئ button to halt operation.
- څارنه: The display can show various operational data such as output frequency, current, and voltage.
5. ساتنه
Regular maintenance ensures optimal performance and extends the lifespan of your V1000 SERVO drive.
- پاکول: Periodically clean the heatsink fins and ventilation openings to prevent dust accumulation, which can impede cooling. Ensure power is off and capacitors are discharged before cleaning.
- معاینه: د تارونو اتصالونه په منظم ډول د ټینګښت او د اغوستلو یا زیان نښو لپاره معاینه کړئ. د عملیاتو په جریان کې د هر ډول غیر معمولي غږونو یا بویونو لپاره وګورئ.
- د چاپیریال معاینه: ډاډ ترلاسه کړئ چې عملیاتي چاپیریال د ټاکل شوي تودوخې او رطوبت حدودو کې پاتې کیږي.
6. ستونزه حل کول
This section provides general guidance for common issues. For detailed troubleshooting, refer to the full Yaskawa V1000 technical manual.
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| ډرایو نه چالانېږي | No input power; Blown fuse; Incorrect wiring | د برېښنا رسولو چک کړئ؛ فیوزونه معاینه کړئ؛ د تارونو اتصالونه تایید کړئ. |
| موټروان نه چلیږي | Incorrect parameters; Motor wiring error; Drive fault | Verify parameter settings; Check motor connections; Check drive display for fault codes. |
| د ډیر تودوخې خبرداری | Insufficient ventilation; Clogged heatsink; Overload | Ensure proper airflow; Clean heatsink; Reduce load or check motor sizing. |
7. مشخصات
Key technical specifications for the Yaskawa V1000 CIMR-VU4A0004FAA SERVO Drive:
| پیرامیټر | ارزښت |
|---|---|
| د ماډل شمیره | CIMR-VU4A0004FAA |
| ننوتۍ جلدtagای (AC) | 380 - 480 V-AC |
| د محصول Voltagای (AC) | 0 - 480 V-AC |
| پړاو | 3PH |
| ځواک | 2 HP |
| د محصول ابعاد | 8.25 x 7.5 x 7 انچه |
| وزن | ۰.۴۵ پونډه (تقریبا ۰.۴ کیلوګرامه) |
| جوړونکی | یاسکاوا |
| ASIN | B07NVYHM29 |
Figure 7.1: Product rating label showing model number, input/output specifications, and certifications.
شکل 7.2: View of the drive unit displaying the model number CIMR-VU4A0004FAA.
Figure 7.3: Product box label confirming the model CIMR-VU4A0004FAA and other identifiers.
8. تضمین او ملاتړ
For specific warranty terms and conditions, please refer to the official documentation provided by Yaskawa or contact Yaskawa customer support directly. Warranty coverage typically varies by region and purchase agreement.
For technical support, service, or to obtain detailed manuals, please visit the official Yaskawa webسایټ ته مراجعه وکړئ یا د دوی مجاز خدماتو مرکزونو سره اړیکه ونیسئ.
