دستورالعملونه+

Tekpower TP8582D

Tekpower TP8582D 2-in-1 Soldering and Hot Air Rework Station User Manual

Model: TP8582D

1. پیژندنه

د پیرودلو لپاره مننهasing the Tekpower TP8582D 2-in-1 Soldering Iron and Hot Air Rework Station. This compact benchtop unit combines a high-performance 70W soldering iron and a 750W hot air rework station, offering micro-computer intelligent control for precise temperature management. It is an essential tool for various applications, including electronics repair, DIY projects, and professional soldering tasks.

This manual provides detailed instructions for the safe and effective operation, setup, and maintenance of your new station. Please read it thoroughly before use and keep it for future reference.

Tekpower TP8582D 2-in-1 Soldering Iron and Hot Air Rework Station

یو اوورview of the Tekpower TP8582D unit, showing the main control station, soldering iron, hot air gun, and various nozzles.

2. د خوندیتوب معلومات

تل د لاندې خوندیتوب احتیاطي تدابیرو ته پام وکړئ ترڅو واحد ته زیان یا زیان ونه رسیږي:

  • بریښنایی خوندیتوب: Ensure the unit is connected to a properly grounded 110V/60Hz power outlet. Do not operate with wet hands or in damp چاپیریالونه
  • د تودوخې خطر: The soldering iron tip and hot air gun nozzle reach very high temperatures. Avoid direct contact with skin or flammable materials. Use the provided stands and holders.
  • لوګي: Soldering produces fumes. Always work in a well-ventilated area or use a fume extractor.
  • نوزل: Hot air nozzles can remain hot for a period after use. Handle with care.
  • یخ کول: The unit features an intelligent cooling system. Allow the hot air gun to cool down completely before turning off the main power switch or storing the unit.
  • ماشومان او څاروي: واحد د ماشومانو او څارویو له لاسرسي لرې وساتئ.
  • ساتنه: د هر ډول ساتنې یا لوازمو بدلولو دمخه بریښنا قطع کړئ.

3. د بسته محتويات

مهرباني وکړئ د لاندې توکو لپاره بکس وګورئ:

  • 2-in-1 Soldering Station Unit
  • سولډرینګ اوسپنه
  • د ګرمې هوا ټوپک
  • Soldering Handle Bracket
  • سپنج پاک کړئ
  • Hot Air Nozzles: 1 of each (4.4mm, 8mm, 10mm, and 12mm)
  • د بریښنا تار
  • د کارن لارښود (دا سند)

4. ترتیب کول

  1. بسته بندي کول: په احتیاط سره د بسته بندۍ څخه ټولې برخې لرې کړئ.
  2. ځای په ځای کول: Place the main unit on a stable, heat-resistant, and non-flammable surface. Ensure adequate ventilation around the unit.
  3. د سولډرینګ اوسپنې سره وصل کړئ: Plug the soldering iron's connector into the designated port on the front panel (usually labeled 'IRON'). Secure it by tightening the collar. Place the soldering iron in its metal holder.
  4. د ګرمې هوا ټوپک سره وصل کړئ: Plug the hot air gun's connector into the designated port on the front panel (usually labeled 'AIR GUN'). Secure it by tightening the collar. Place the hot air gun in its side-mounted holder.
  5. Sponge Preparation: Wet the cleaning sponge with water and wring it out until it is damp, not dripping. Place it in the sponge tray of the soldering iron holder.
  6. د بریښنا پیوستون: Connect the power cord to the back of the unit and then plug it into a grounded 110V/60Hz power outlet.

5. عملیاتي لارښوونې

5.1 عمومي عملیات

  1. Turn on the main power switch located on the front panel. The digital displays will illuminate.
  2. The unit has separate power switches and temperature controls for the soldering iron and hot air gun.

5.2 Soldering Iron Operation

Tekpower TP8582D Soldering Iron

The soldering iron component of the TP8582D station, featuring its tip and connector cable.

Close-up of Tekpower Soldering Iron Handle with 'TEKPOWER' branding

یو مفصل view of the soldering iron handle, highlighting the Tekpower branding and ESD safety markings.

  1. Turn on the soldering iron power switch.
  2. Adjust the temperature using the dedicated knob for the soldering iron. The digital display will show the set temperature. The temperature range is 392°F to 896°F (200°C to 480°C).
  3. Allow the iron to heat up to the desired temperature. The display will show the current temperature.
  4. Before soldering, clean the tip on the damp sponge or brass wool. Apply a small amount of solder to 'tin' the tip.
  5. After use, turn off the soldering iron power switch.

5.3 Hot Air Gun Operation

Tekpower TP8582D Hot Air Gun

The hot air gun component of the TP8582D station, showing its nozzle and handle.

  1. Select the appropriate nozzle for your application and attach it to the hot air gun.
  2. Turn on the hot air gun power switch.
  3. Adjust the temperature using the dedicated knob for the hot air gun. The temperature range is 212°F to 896°F (100°C to 480°C).
  4. Adjust the airflow using the airflow control knob. The maximum airflow is 120 liters per minute.
  5. When finished, place the hot air gun back into its holder. The unit will automatically activate its intelligent cooling system, blowing cool air until the temperature drops to a safe level, then it will shut off. Do not turn off the main power switch until the cooling cycle is complete.

6. ساتنه

  • Soldering Tip Cleaning: Regularly clean the soldering tip using the damp sponge or brass wool to remove oxidation and old solder. This helps maintain tip longevity and soldering performance.
  • د رنګ کولو لارښوونه: Always tin the soldering tip with a fresh layer of solder before and after use, and during prolonged idle periods, to prevent oxidation.
  • د واحد پاکول: Wipe the main unit and handles with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • د نوزل ​​پاکول: Ensure hot air nozzles are clear of debris. Clean them when cool.
  • ذخیره کول: کله چې کارول نه وي، نو دا واحد په وچ، دوړو څخه پاک چاپیریال کې وساتئ.

7. ستونزه حل کول

ستونزهاحتمالي لاملد حل لاره
واحد ته بریښنا نشته.Power cord not connected; main power switch off; blown fuse.Check power cord connection; ensure main power switch is ON; check and replace fuse if necessary.
د سولډرینګ اوسپنه نه ګرمیږي.Soldering iron power switch off; faulty heating element/tip; loose connection.Turn on soldering iron power switch; check connection; replace tip or contact support if heating element is faulty.
Hot air gun not blowing or heating.Hot air gun power switch off; nozzle blocked; faulty heating element/fan.Turn on hot air gun power switch; check for nozzle blockages; contact support if internal components are faulty.
د تودوخې ښودنه بې نظمه ده.Sensor issue; loose connection.Ensure connections are secure. If problem persists, contact support.
Hot air gun does not turn off immediately after placing in holder.د یخولو عادي دوره.This is normal. The intelligent cooling system will run until the temperature is safe, then shut off automatically. Do not disconnect power during this cycle.

8. مشخصات

Tekpower TP8582D Soldering Station Dimensions

Diagram illustrating the physical dimensions of the Tekpower TP8582D main unit.

د ګرمې هوا ټوپک

  • ننوتۍ جلدtage: 110V/60Hz
  • اعظمي بریښنا: 750W
  • Temperature Stability: ± 2 °C
  • Airflow: 120L/min (max)
  • Temperature Control: 212 – 896 °F (100 – 480 °C)
  • Nozzle to Ground Voltage: <2mv
  • Nozzle to Ground Impedance: <2Ω

سولډرینګ اوسپنه

  • ننوتۍ جلدtage: 110V/60Hz
  • اعظمي بریښنا: 70W
  • Temperature Stability: ± 1 °C
  • Temperature Control: 392 – 896 °F (200 – 480 °C)
  • Nozzle to Ground Voltage: <2mv
  • Nozzle to Ground Impedance: <2Ω
  • Iron Design: ESD (Electrostatic Discharge) safe
  • Heater Material: Nichrome

جنرال

  • Model Number: TP8582D
  • د توکي وزن: 5.68 پونډه
  • د محصول ابعاد: 8.5 x 7.75 x 4 انچه
  • مواد: فلز
  • د بریښنا سرچینه: AC

9. تضمین او ملاتړ

The Tekpower TP8582D comes with a د تولید کونکي 1 کلن تضمین د پیرود نیټې څخه. دا تضمین د عادي کارونې الندې د موادو او کارموندنې نیمګړتیاوې پوښي.

For technical support, warranty claims, or replacement parts, please contact Tekpower customer service. Refer to the contact information provided on the product packaging or the official Tekpower webسایټ

مهرباني وکړئ د تضمین تصدیق لپاره د پیرود ثبوت وساتئ.

Documents - Tekpower – TP8582D

اړوند اسناد نشته