1. پیژندنه
The HELIX M SIX is a highly versatile 6-channel Class D amplifier designed for various car audio applications, including 3-way, 2-way, or small subwoofer setups. Despite its compact dimensions, it delivers robust power and features a comprehensive set of adjustments for optimal sound performance. This manual provides essential information for the proper installation, operation, and maintenance of your M SIX ampلايف
2. ځانګړتیاوې
- Highly compact Class D amplifier with high output power of 100 Watts RMS at 4 and 2 Ohms.
- Start-Stop capability, ensuring functionality even with supply voltage drops down to 6V.
- Six-channel RCA input for flexible signal routing.
- Integrated active crossover with adjustable high-pass, low-pass, band-pass, and subsonic filters.
- 'Input Mode' switch for channels E & F, allowing flexible distribution of input signals.
- SMD (Surface Mounted Device) technology for minimal space requirements and maximum reliability.
- Exclusive, very compact design with an illuminated HELIX logo and low heat generation due to high efficiency.
3. ترتیب او نصب کول
ستاسو د فعالیت او اوږد عمر لپاره مناسب نصب کول خورا مهم دي amplifier. It is recommended to have the installation performed by a qualified professional.
3.1 د خوندیتوب لارښوونې
- د نصبولو کار پیل کولو دمخه د موټر بیټرۍ قطع کړئ.
- ډاډ ترلاسه کړئ چې ټول تارونه په سمه توګه لیږدول شوي او خوندي شوي دي ترڅو د زیان یا لنډ سرکټ مخه ونیول شي.
- Use appropriate gauge power and ground cables.
- نصب کړئ amplifier in a dry, well-ventilated location, away from direct sunlight or excessive heat.
3.2 Ampلایفیر اوورview
The HELIX M SIX amplifier features a sleek, compact design. The top panel displays the HELIX logo and model name. The input and control connections are located on one end, while the power and speaker output connections are on the opposite end.
3.3 Input and Control Connections
The input side of the amplifier houses the RCA inputs for channels A through F, along with various controls for input level and crossover settings. The 'Input Mode' switch for channels E & F is also located here.
3.4 Power and Speaker Output Connections
The opposite end of the amplifier provides terminals for power input (+12V, REM, GND) and speaker outputs for all six channels. Ensure correct polarity and secure connections for all speaker wires.
۵. عملیات او کنټرولونه
4.1 Input Level Adjustment
Adjust the 'INPUT LEVEL' controls for each channel pair (A/B, C/D, E/F) to match the output voltage of your head unit. Start with the level set to minimum and gradually increase until a clean, undistorted sound is achieved at high volume levels from your head unit.
۷.۲ د کراس اوور ترتیبات
The M SIX features an integrated active crossover with adjustable filters for precise sound tuning:
- د لوړ پاس فلټر (HPF): Allows frequencies above the set point to pass through. Adjustable from 15 Hz to 4,000 Hz.
- د ټیټ پاس فلټر (LPF): Allows frequencies below the set point to pass through. Adjustable from 40 Hz to 4,000 Hz.
- Band-Pass Filter: Achieved by combining HPF and LPF settings, allowing a specific range of frequencies to pass. Adjustable from 15 Hz to 4,000 Hz.
- سبسونیک فلټر: A high-pass filter specifically for subwoofers, typically set below the audible range to protect the speaker from damaging low frequencies. Adjustable from 15 Hz to 4,000 Hz.
The slope for high-pass and low-pass filters is 12 dB/Octave.
4.3 Input Mode Switch (Channels E & F)
The 'Input Mode' switch for channels E & F allows flexible signal distribution. Refer to the amplifier's control panel (Figure 2) for specific settings and their functions, which typically include options like stereo, summed, or full-range input for these channels.
5. تخنیکي مشخصات
| RMS Power (≤ 1% THD+N) @ 4 Ohm | 6 x 100 واټونه |
| RMS Power (≤ 1% THD+N) @ 2 Ohm | 6 x 100 واټونه |
| Bridged Power @ 4 Ohm | 3 x 200 واټونه |
| Max. Power per Channel* | Up to 130 Watts RMS @ 4 / 2 Ohm |
| Ampژوندی ټیکنالوژي | د ټولګي |
| داخلونه | 6 x RCA, 1 x Remote In |
| د RCA ان پټ حساسیت | ۲۲۰ - ۲۴۰ ولټه |
| د RCA د ننوتلو خنډ | 20 kOhm |
| محصولات | ۴ x د سپیکر محصول |
| د تعدد ځواب | ۲۰ هرټز - ۲۰،۰۰۰ هرټز |
| د بریښنا لیږدونکی | 15 Hz - 4,000 Hz adjustable |
| د ټیټ پاس فلټر | 40 Hz - 4,000 Hz adjustable |
| د بانډ پاس فلټر | 15 Hz - 4,000 Hz adjustable |
| Subsonic Filter / HPF | 15 Hz - 4,000 Hz adjustable |
| Slope High- / Low-Pass | 12 dB/اکتوبر |
| Signal-to-Noise Ratio (Analog Input) | 98 dB (د وزن لرونکی) |
| ټول هارمونیک تحریف (THD) | ۸۲.۸٪ |
| Dampد فنګتور فاکتور | 100 |
| د عملیاتو Voltage | 10.5 - 16 Volts (max. 5 sec. down to 6 Volts) |
| د فعاله اوسني مصرف | 1,550 mA |
| د عملیاتي تودوخې سلسله | -40°C څخه تر +70°C |
| فیوز | 2 x 35 A Maxi Blade Fuse (FK3) |
| د بریښنا مصرف | DC 12 V Δ 80 A max. |
| ابعاد (H x W x D) | 50 x 320 x 154 mm |
* In typical multi-channel applications (2- / 3-way system + Rear + Subwoofer)
6. ساتنه
The HELIX M SIX amplifier is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure optimal performance:
- پاکول: په دوره توګه پاک کړئ ampد لایفیر بهرنۍ برخه د نرم او وچ ټوکر سره ومینځئ. د سختو کیمیاوي موادو یا د کثافاتو پاکوونکو کارولو څخه ډډه وکړئ.
- وینټیلیشن: ډاډ ترلاسه کړئ چې د amplifier's cooling fins are free from dust and debris to maintain proper heat dissipation. Do not obstruct airflow around the unit.
- اړیکې: کله ناکله ټول بریښنا، ځمکني، ریموټ او سپیکر اتصالونه وګورئ ترڅو ډاډ ترلاسه کړئ چې دوی خوندي او له زنګ څخه پاک دي.
7. ستونزه حل کول
If you experience issues with your HELIX M SIX amplifier, consult the following common troubleshooting steps:
- ځواک نشته: Check the main fuse in the vehicle's power line and the fuses on the amplifier itself. Verify all power and ground connections are secure. Ensure the remote turn-on wire is receiving +12V when the head unit is on.
- غږ نشته: Check all RCA input cables for proper connection and integrity. Verify speaker wire connections and ensure no shorts exist. Confirm the head unit is sending an audio signal.
- تحریف شوی غږ: Reduce the input level gain on the amplifier. Check for proper crossover settings. Ensure speaker impedance matches the amplifier's capabilities. Inspect speaker wires for damage or shorts.
- Protection Mode (PROTECT LED on): This indicates an internal fault, overheating, or a short circuit in the speaker wiring. Turn off the system, check speaker wiring for shorts, allow the amplifier to cool down, and then restart. If the issue persists, seek professional assistance.
8. د بسته محتويات
The HELIX M SIX ampد لایفیر کڅوړه کې شامل دي:
- 1 x HELIX M SIX Ampلايف
- 1 x Mounting Material (screws, etc.)
- ۱ x لارښود لارښود (دا سند)
9. تضمین او ملاتړ
HELIX products are covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official HELIX website for detailed warranty terms and conditions. For technical support or service inquiries, contact your authorized HELIX dealer or the HELIX customer service department.
