دستورالعملونه+

TOTAL TW22005

TOTAL TW22005 Digital Welding Machine Inverter (200 Amp) د کارن لارښود

Model: TW22005 | Brand: TOTAL

1. پیژندنه

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your TOTAL TW22005 Digital Welding Machine Inverter. Please read this manual thoroughly before using the machine to ensure proper handling and to prevent injury or damage.

The TOTAL TW22005 is a 200 Amp Digital Welding Machine Inverter designed for various welding applications. It features IGBT Inverter Technology for stable arc performance and efficient power usage.

2. د خوندیتوب لارښوونې

Always prioritize safety when operating welding equipment. Failure to follow these instructions can result in serious injury or death.

  • شخصي محافظتي تجهیزات (PPE): تل د ویلډینګ خولۍ واغوندئ چې مناسب سیوري ولري، د اور په وړاندې مقاومت لرونکي جامې، د ویلډینګ دستکشې، او خوندیتوب بوټان ولري.
  • وینټیلیشن: Ensure adequate ventilation to remove welding fumes, which can be hazardous to health.
  • بریښنایی خوندیتوب:
    • Ensure the power supply matches the machine's requirements (1~220-240V).
    • Never operate the machine with damaged cables or connectors.
    • Ensure proper grounding of the workpiece and the machine.
    • Avoid welding in wet conditions.
  • د اور وژنې مخنیوی: د اور لګېدونکي توکي د ویلډینګ ساحې څخه لرې وساتئ. د اور وژنې وسیله په اسانۍ سره ولرئ.
  • د قوس وړانګې: Welding arc rays can cause eye and skin burns. Protect yourself and bystanders.
  • برقی مقناطیسي ساحې (EMF): Persons with pacemakers or other medical implants should consult their doctor before operating welding equipment.

3. تنظیم او پیوستون

Before starting any welding operation, ensure the machine is correctly set up and all connections are secure.

  1. بسته بندي کول: Carefully remove the welding machine and all accessories from its packaging. Inspect for any shipping damage.
  2. ځای په ځای کول: Place the welding machine on a stable, level surface, ensuring adequate clearance for ventilation around the unit.
  3. د بریښنا پیوستون: Connect the power cord to a suitable 1~220-240V power outlet. Ensure the power switch on the machine is in the OFF position before connecting.
  4. ځمکه Clamp پیوستون: ځمکه cl سره وصل کړئamp cable to the negative (-) terminal on the front panel of the welding machine. Securely attach the earth clamp د ورک پیس یا ویلډینګ میز ته، ښه بریښنایی تماس ډاډمن کول.
  5. د الکترود هولډر اتصال: Connect the electrode holder cable to the positive (+) terminal on the front panel of the welding machine. Insert the welding electrode into the electrode holder.
TOTAL TW22005 Digital Welding Machine Inverter with connection diagram
Figure 1: The TOTAL TW22005 Digital Welding Machine Inverter and a diagram illustrating the basic welding circuit connections, including the electrode holder, earth clamp, and base metal.

د انځور تفصیل: The image displays the teal and white TOTAL TW22005 Digital Welding Machine Inverter from a three-quarter front view. The machine has a handle on top, ventilation grilles on the sides, and a control panel on the front with a digital display, an amperage adjustment knob, and power/overheat indicator lights. Below the control panel are the positive (red) and negative (black) terminals for welding cable connections. To the left of the main machine, a smaller diagram illustrates the basic setup: the welding machine connected to a 1~220-240V power source, with an electrode holder connected to the workpiece and an earth clamp also connected to the workpiece (base metal), completing the circuit.

4. عملیاتي لارښوونې

Follow these steps for safe and effective operation of your welding machine.

  1. پاور آن: Once all connections are secure, switch the power button to the ON position. The digital display should illuminate, and the 'POWER' indicator light will turn on.
  2. ټاکل Ampزمانه: د کارولو amperage adjustment knob on the front panel to set the desired welding current. The digital display will show the selected amperage. Refer to electrode manufacturer guidelines for recommended settings.
  3. د کار ټوټه چمتو کول: Ensure the workpiece is clean, dry, and free of rust, paint, or grease to ensure good electrical conductivity and a quality weld.
  4. ویلډینګ پیل کړئ: Strike an arc by gently touching the electrode to the workpiece and quickly lifting it slightly to maintain the arc. Maintain a consistent arc length and travel speed.
  5. Monitor Overheat Indicator: If the 'OVER-HEAT' indicator light illuminates, the machine has exceeded its thermal limit. Stop welding immediately and allow the machine to cool down. The light will turn off when it's safe to resume.
  6. بندول: After completing your welding tasks, switch the power button to the OFF position and disconnect the machine from the power supply.

5. ساتنه

منظم ساتنه ستاسو د ویلډینګ ماشین اوږد عمر او غوره فعالیت تضمینوي.

  • پاکول:
    • په دوره یي ډول د ماشین بهرنۍ برخه د وچ، نرم ټوکر سره پاکه کړئ.
    • Use compressed air to blow out dust and debris from the ventilation grilles. Ensure the machine is unplugged before cleaning.
  • د کیبل معاینه: Regularly inspect welding cables, electrode holder, and earth clamp for cuts, cracks, or loose connections. Replace damaged components immediately.
  • ذخیره کول: Store the welding machine in a clean, dry, and well-ventilated area, away from direct sunlight and extreme temperatures.
  • مسلکي خدمتونه: For internal repairs or complex issues, contact qualified service personnel. Do not attempt to open the machine casing yourself, as it may void the warranty and expose you to electrical hazards.

6. ستونزه حل کول

This section addresses common issues you might encounter with your welding machine.

ستونزهاحتمالي لاملد حل لاره
ماشین نه چالانېږي.No power supply; Power switch off; Blown fuse/tripped breaker.Check power outlet and cord; Ensure power switch is ON; Check building's electrical panel.
No welding arc.د ځمکې خرابوالیamp connection; Loose welding cable connections; Incorrect amperage setting; Wet electrode.Ensure good contact for earth clamp; Tighten all cable connections; Adjust amperage; Use dry electrodes.
'OVER-HEAT' indicator is on.Machine has overheated due to prolonged use or insufficient ventilation.Stop welding and allow the machine to cool down. Ensure ventilation grilles are clear.
بې ثباته آرک.غلط amperage; Poor electrode quality; Contaminated workpiece; Long arc length.سمون amperage; Use quality electrodes; Clean workpiece; Maintain proper arc length.

7. مشخصات

Key technical specifications for the TOTAL TW22005 Digital Welding Machine Inverter:

  • ماډل: TW22005
  • نښه: ټولټال
  • ډول: Digital Welding Machine Inverter
  • Ampزمانه: 200 Amp
  • د بریښنا سرچینې ډول: AC
  • ننوتۍ جلدtage: 1~220-240V
  • ټکنالوژي: د IGBT انورټر ټیکنالوژي
  • مواد: سټینلیس سټیل
  • رنګ: Multi (Teal White)
  • د توکي وزن: 1 کیلوګرامه
  • د بسته ابعاد: 24.5 x 9.6 x 1.9 سانتي متره
  • شاملې برخې: TW22005 (main unit)

8. تضمین او ملاتړ

For warranty information, service, or technical support, please refer to the documentation provided with your purchase or contact TOTAL customer service. Keep your purchase receipt as proof of purchase for warranty claims.

یادونه: غیر مجاز ترمیمونه یا تعدیلات ممکن ستاسو تضمین باطل کړي.