د ECHOGEAR بشپړ حرکت تلویزیون دیوال ماونټ لارښوونې لارښود

پیژندنه

This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your ECHOGEAR Full Motion Articulating TV Wall Mount. Please read this manual thoroughly before beginning installation.

یو مفصل view of the ECHOGEAR Full Motion Articulating TV Wall Mount, showcasing its robust black steel construction and articulating arms.

د خوندیتوب معلومات

د خوندیتوب مهمې لارښوونې: Read all instructions before installation. Failure to follow these instructions can result in property damage, serious injury, or death.

• ډاډ ترلاسه کړئ چې د نصب کولو سطحه کولی شي د نصب او تلویزیون ګډ وزن په خوندي ډول ملاتړ وکړي.
• د وزن اعظمي ظرفیت ۶۶ پونډه (۲۹.۹ کیلوګرامه) یا د سکرین اعظمي اندازه ۵۰ انچه مه زیاتوئ.
• Always use a stud finder to locate wood studs or ensure you are mounting into solid concrete/masonry.
• Use appropriate safety gear, including eye protection, during installation.
• د خوندي نصبولو لپاره دوه کسان سپارښتنه کیږي.

د بسته محتويات

Verify all parts are present and undamaged before beginning installation. If any parts are missing or defective, contact ECHOGEAR customer support.

• د دیوال پلیټ مجلس
• د تلویزیون خطونه (2)
• د نصبولو هارډویر کټ (مختلف پیچونه، واشیرونه، فاصلې)
• د برمه کولو کينډۍ
• د کیبل مدیریت کلیپونه
• د لارښوونې لارښود

تنظیم او نصب کول

This section guides you through the process of mounting your ECHOGEAR TV wall mount.

1 ګام: تلویزیون ته قوسونه ضمیمه کړئ

Carefully place your TV face down on a soft, clean surface. Attach the two TV brackets to the back of your television using the appropriate screws, washers, and spacers from the hardware kit. Ensure they are securely fastened.

A close-up image showing a hand using a screwdriver to attach one of the mounting brackets to the back of a television, illustrating the initial step of assembly.

Step 2: Secure Wall Plate

Determine the desired mounting location on your wall. Use the provided drilling template to mark the pilot hole locations. For wood stud installation, ensure the wall plate is centered on the studs. For concrete/masonry, use appropriate anchors. Drill pilot holes and securely fasten the wall plate to the wall using the lag bolts.

An image depicting the use of the ECHOGEAR drilling template, taped to a wall, with a power drill creating pilot holes for the wall mount. This template simplifies accurate placement.

A view of the wall plate assembly being secured to the wall, showing the robust construction and the bolts used for attachment. This step ensures the mount is firmly anchored.

Step 3: Hang TV on Wall Mount

With assistance, carefully lift the television and hook the TV brackets onto the wall plate assembly. Ensure the TV is securely seated. The mount allows for post-installation leveling and centering.

Two individuals are shown carefully lifting a television to attach it to the wall mount, highlighting the ease of the final hanging step.

A diagram illustrating the mount's ability to slide 5.4 inches left or right after installation, allowing for perfect TV centering even if wall studs are not ideally spaced.

عملیاتي لارښوونې

Your ECHOGEAR Full Motion TV Wall Mount offers versatile adjustments for optimal viewing.

Extension and Retraction

Gently pull the television away from the wall to extend the articulating arms up to 19 inches. Push the television back towards the wall to retract the mount to a slim 2.9-inch profile.

This image demonstrates the mount's full extension of 19 inches from the wall, providing ample space for cable access, and its ability to retract to a slim 2.9 inches for a low-profile وګوره

د څنډې سمول

The mount allows for a 140-degree swivel, enabling you to angle your TV for viewپه خونه کې له مختلفو پوستونو څخه راوتل.

A visual representation of the mount's 140-degree swivel range and 15-degree tilt capability, highlighting the tool-free tilt knob for easy angle adjustments.

د خښتو سمون

Adjust the tilt of your television up to 15 degrees to reduce glare and achieve the perfect viewing angle. Use the tool-free tilt knob for easy adjustments.

د کیبل مدیریت

Utilize the integrated cable management clips to route and organize your cables along the articulating arms, ensuring a tidy appearance.

A close-up image showing cables neatly routed along the articulating arm of the mount using the included cable clips, demonstrating effective cable management.

ساتنه

• په دوره یي ډول ټول پیچونه او بولټونه وګورئ ترڅو ډاډ ترلاسه شي چې دوی کلک او خوندي پاتې دي.
• غره د نرم او وچ ټوکر سره پاک کړئ. د کثافاتو پاکوونکو یا محلولونو څخه ډډه وکړئ.
• Lubricate moving parts if necessary, using a silicone-based lubricant.

د ستونزو حل کول

د نصبولو وروسته تلویزیون په سطحه نه دی.

The ECHOGEAR mount allows for post-installation leveling. Gently adjust the TV by hand to achieve the desired level. The mount's design accommodates minor adjustments.

Mount feels stiff or difficult to move.

Check for any cables or obstructions hindering movement. If the issue persists, apply a small amount of silicone-based lubricant to the articulating joints.

ورکې برخې.

If any parts were missing from your package, please contact ECHOGEAR customer support immediately for assistance.

مشخصات

تضمین او ملاتړ

ECHOGEAR stands behind its products. For warranty information, technical assistance, or any questions regarding your TV mount, please contact our Minnesota-based product experts.

د اړیکو معلومات:

• Phone: (Refer to product packaging or ECHOGEAR website for current number)
• Email: (Refer to product packaging or ECHOGEAR website for current email)
• Webسایټ: www.echogear.com

ECHOGEAR is committed to environmental responsibility. For every EGLF3 TV mount sold, a tree is planted.

An image highlighting ECHOGEAR's commitment to sustainability, stating that over 1,000,000 trees have been planted through their partnership with The Carbon Offset Company.