Hayward W3T-Cell-3 TurboCell Salt Chlorination Cell Instruction Manual

1. محصول ختم شوview

The Hayward W3T-Cell-3 TurboCell Salt Chlorination Cell is designed for in-ground swimming pools up to 15,000 gallons. It provides naturally sanitized water, reducing the need for traditional chlorine methods and offering a more comfortable swimming experience.

Image: The Hayward W3T-Cell-3 TurboCell Salt Chlorination Cell, a key component for pool sanitization.

کلیدي ځانګړتیاوې:

• Delivers silky smooth, naturally sanitized water that won’t irritate eyes, dry out skin, or cause fabrics to fade.
• Reduces chlorine costs by up to 50%.
• Independently certified by the National Sanitation Foundation (NSF) for reliable performance.
• Compatible with Hayward AquaRite, AquaRite Pro, SwimPure Plus salt chlorination systems.
• Compatible with Hayward OmniLogic, OmniHub, ProLogic, and AquaPlus automation and control systems.

2. ترتیب او نصب کول

Proper installation is crucial for the optimal performance and longevity of your TurboCell. Always ensure the pool pump is off and power to the chlorinator is disconnected before beginning installation.

2.1 د خوندیتوب احتیاطونه

• Always disconnect power to the pool pump and chlorinator before handling the salt cell.
• Ensure proper ventilation if working with chemicals.
• مناسب شخصي محافظتي تجهیزات (PPE) واغوندئ لکه دستکشې او د سترګو محافظت.

2.2 د نصبولو مرحلې

1. بریښنا بند کړئ: Disconnect power to the pool pump and the salt chlorination system at the circuit breaker.
2. Unplug Salt Cell: Unplug the salt cell connector from the chlorinator control unit.
3. د اوبو ایستل: Open the strainer lid on the pool pump to allow air into the system, helping to drain water from the salt cell for easier removal.
4. Remove Old Cell: Loosen the unions on both ends of the existing salt cell and carefully remove it from the plumbing.
5. Install New Cell: Position the new Hayward W3T-Cell-3 TurboCell, ensuring the water flow indicator on the cell aligns with the direction of water flow in your plumbing.
6. اړیکې ټینګول: Securely tighten the unions on both ends of the salt cell to prevent leaks.
7. بریښنا بیا وصل کړئ: Plug the salt cell connector back into the chlorinator control unit. Close the strainer lid on the pump.
8. د بریښنا بیرته راګرځول: Turn on the pool pump and the salt chlorination system at the circuit breaker.
9. Check Salt Levels: After powering on, press the "Diagnostics" button on your chlorinator to check the salt level readings. The system will calibrate, and the correct reading should appear.

انځور: مخکینۍ برخه view of the Hayward W3T-Cell-3 TurboCell Salt Chlorination Cell, showing its design and connections.

Image: Diagram illustrating the dimensions (length, height, width, cord length, weight) of the Hayward W3T-Cell-3 TurboCell.

3. عملیات

The Hayward TurboCell works by converting salt in your pool water into chlorine, providing continuous sanitization. This process is managed by your compatible Hayward chlorination or automation system.

3.1 How Salt Chlorination Works

1. Pool salt (NaCl) is added to the water.
2. Water dissolves salt into a low, teardrop-level salinity.
3. The chlorinator adjusts chlorine production for perfect balance.
4. The salt conversion cell turns salt into chlorine gas (Cl₂).
5. Chlorine gas (Cl₂) reacts with pool water to form a sanitizing compound (HOCl).

Image: Diagram illustrating the five-step process of how Hayward salt chlorination systems convert salt into chlorine for pool sanitization.

Image: Illustrates the natural sanitization process, creating a virtually endless supply of chlorine from salt.

4. ساتنه

Regular maintenance ensures the longevity and efficiency of your TurboCell. Inspect and clean the cell every 3 months or as needed.

4.1 Cleaning the Salt Cell

1. د بریښنا قطع کول: Turn off the chlorinator and pool pump, and unplug the salt cell.
2. Remove Cell: Remove the salt cell from the plumbing as described in the installation steps.
3. د پاکولو محلول چمتو کړئ: Use a salt cell cleaning holder (if available) or a suitable container. Fill the cell with a solution of 1/3 muriatic acid and 2/3 clean water.
4. وخورئ: Allow the cell to soak for approximately 15 minutes to dissolve mineral deposits on the titanium plates. Do not exceed 15 minutes to avoid damage.
5. پاکول: Pour out the cleaning solution and thoroughly rinse the salt cell with clean water.
6. بیا لګول: Reinstall the cleaned salt cell into the plumbing, ensuring secure connections. Reconnect the salt cell plug and restore power to the system.

یادونه: Always follow safety guidelines when handling muriatic acid. Refer to your chlorinator's manual for specific cleaning instructions and recommended pool chemistry levels.

5. ستونزه حل کول

If your Hayward W3T-Cell-3 TurboCell is not performing as expected, consult the following common issues and solutions:

For detailed diagnostic codes and advanced troubleshooting, refer to your specific Hayward chlorinator control unit's manual.

6. مشخصات

7. ملاتړ

For further assistance, technical support, or warranty inquiries, please contact Hayward customer service. You can also visit the official Hayward website for additional resources and product information.

• Hayward Webسایټ: hayward.com
• د پیرودونکو خدمت: Refer to your product packaging or the Hayward webد اړیکو د تازه معلوماتو لپاره سایټ.