1. پیژندنه
د پیرودلو لپاره مننهasing the BeamZ LF1500 Professional Heavy Fog Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read this manual thoroughly before first use and keep it for future reference.
محصول پای ته ورسیدview
The BeamZ LF1500 is a professional heavy fog machine designed to produce ground-hugging fog effects without the need for dry ice. It utilizes advanced ultrasonic technology to create a dense, low-lying fog using standard fog fluid and water. Its robust flight case with wheels ensures easy transport and protection, making it ideal for various events and professional applications.
Figure 1: BeamZ LF1500 Heavy Fog Machine with its flexible fog output hose and nozzle.
2. د خوندیتوب لارښوونې
د بریښنا شاک، اور، یا ټپي کیدو مخنیوي لپاره تل لاندې خوندیتوب احتیاطي تدابیر په پام کې ونیسئ:
- Ensure the unit is connected to a grounded power outlet (230Vac / 50Hz).
- که چیرې د بریښنا تار خراب شوی وي، ماشین مه چلوئ.
- ماشین د اور اخیستونکو موادو څخه لرې وساتئ.
- Use only BeamZ approved fog fluid and demineralized water.
- Do not touch hot surfaces during or immediately after operation.
- د ماشین شاوخوا مناسب هوا ورکول ډاډمن کړئ.
- یونټ په اوبو یا نورو مایعونو کې مه ډوب کوئ.
- د ماشومانو د لاسرسي څخه لرې وساتئ.
- د پاکولو یا خدمت کولو دمخه د بریښنا څخه جلا کړئ.
3. ترتیب کول
- بسته بندي کول: Carefully remove the machine from its packaging. Inspect for any damage during transit.
- ځای په ځای کول: Place the machine on a stable, level surface. Ensure there is sufficient space around the unit for ventilation.
- د مایعاتو ډکول:
- Open the fluid reservoir cap.
- Fill the 5-liter reservoir with a mixture of BeamZ standard fog fluid and demineralized water. Refer to the fog fluid instructions for recommended ratios.
- Securely close the reservoir cap.
- د نلی پیوستون: Attach the flexible fog output hose to the designated port on the machine. Ensure it is securely fastened to prevent leaks.
- د بریښنا پیوستون: Connect the power cable to a suitable 230Vac / 50Hz grounded power outlet.
4. عملیاتي لارښوونې
Initial Power-On and Warm-up
Once connected to power, the machine will automatically begin its warm-up cycle. The warm-up time is approximately 8 minutes. The display will indicate when the machine is ready for operation.
د کنټرول طریقې
The BeamZ LF1500 can be controlled via DMX or manually.
لاسي عملیات
Use the integrated digital display and control buttons to adjust settings directly on the unit. You can control:
- د غبار تولید: Adjust the intensity of the fog production.
- د فین سرعت: Control the speed of the internal fan, which affects the spread and density of the fog.
- Continuous Fog: The machine supports continuous fog output once warmed up.
د DMX عملیات
For advanced control and integration into lighting setups, connect a DMX controller to the 3-pin XLR DMX input/output ports. The machine supports 1 or 2 DMX channels. Refer to the DMX chart below for channel assignments and values.
| چینل | فعالیت | د ارزښت رینج | تفصیل |
|---|---|---|---|
| 1 | د وریجو محصول | 0-255 | 0 = Off, 1-255 = Fog output intensity (0-100%) |
| 2 | د فین سرعت | 0-255 | 0 = Off, 1-255 = Fan speed (0-100%) |
5. ساتنه
Regular maintenance ensures the longevity and optimal performance of your BeamZ LF1500.
- د مایعاتو ځای ناستی: Always use fresh, clean fog fluid and demineralized water. Do not mix different types of fluid.
- پاکول:
- Periodically clean the exterior of the machine with a soft, dry cloth.
- Ensure the air vents are free from dust and debris to prevent overheating.
- If the machine is stored for extended periods, it is recommended to run a cleaning solution (distilled water) through the system to prevent clogs.
- ذخیره کول: Store the machine in a cool, dry place. If storing for a long time, empty the fluid reservoir.
6. ستونزه حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| د تیارو تولید نشته |
|
|
| Weak fog output |
|
|
| ماشین نه چلیږي |
|
|
If problems persist after attempting these solutions, please contact BeamZ customer support or a qualified service technician.
7. مشخصات
| فیچر | مشخصات |
|---|---|
| د ماډل شمیره | LF1500 (160.748) |
| د بریښنا رسول | 230Vac / 50Hz |
| د تودوخې وخت | نږدې 8 دقیقې |
| د مایع ټانک ظرفیت | 5 لیتره |
| د کنټرول طریقې | DMX، لارښود |
| د DMX چینلونه | 1 یا 2 |
| د DMX پیوستون | 3-پن XLR |
| ابعاد (L x W x H) | 630 x 350 x 480 mm |
| وزن | 25.6 کیلو ګرامه |
| ټیکنالوژي | Ultrasonic (no dry ice required) |
| دوامداره محصول | هو |
8. تضمین او ملاتړ
Information regarding warranty coverage and customer support for the BeamZ LF1500 is typically provided with your purchase documentation or can be found on the official BeamZ webسایټ. مهرباني وکړئ د هر ډول تضمین ادعا لپاره د پیرود ثبوت وساتئ.
For technical assistance, spare parts, or service inquiries, please contact your local BeamZ distributor or visit the official BeamZ webد اړیکو معلوماتو لپاره سایټ.
د برانډ رسمي پلورنځی: BeamZ Amazon Store
۵. د رسنیو سرچینې
Below are relevant media resources for the BeamZ LF1500.
د محصول انځورونه
The BeamZ LF1500 Professional Heavy Fog Machine, showcasing its compact design within a flight case and the flexible output hose for directing fog.
د رسمي محصول ویډیوګانې
په ورکړل شویو معلوماتو کې د پلورونکي لخوا د محصول رسمي ویډیوګانې ونه موندل شوې.
