VISEL ELIMINACODE Remote Control User Manual

1. پیژندنه

This manual provides detailed instructions for the proper use and maintenance of your VISEL ELIMINACODE radio remote control. This device is designed to operate seamlessly with VISEL display models TD2, TD3, TD4, MD2, and MD3, allowing for code elimination without direct interaction with the display's buttons or cables.

2. د خوندیتوب معلومات

• ریموټ کنټرول د اوبو او ډیر رطوبت څخه لرې وساتئ.
• د وسیلې له مینځه وړلو یا د قوي تاثیراتو تابع کولو څخه ډډه وکړئ.
• Do not attempt to open or repair the remote control yourself. Refer to qualified personnel for service.
• د ځایی مقرراتو سره سم په مسؤلیت سره کارول شوي بیټرۍ تصفیه کړئ.

3. د بسته محتويات

ډاډ ترلاسه کړئ چې ټول توکي په کڅوړه کې شتون لري:

• VISEL ELIMINACODE Remote Control
• ۹ ولټه بیټرۍ (مخکې نصب شوې یا په جلا توګه شامله ده)
• دا کارن لارښود

4. محصول ختم شوview

The VISEL ELIMINACODE remote control features a simple, ergonomic design for ease of use. Below is an illustration of the device and its key components.

شکل 1: VISEL ELIMINACODE Remote Control. The remote is dark grey, shaped like a stylized 'V' or 'Y'. It features a large red circular button labeled "NEXT" at the top, a smaller red circular indicator labeled "C" on the left, and a small grey circular indicator on the right. The brand name "Minipoint" is visible in the center, and a small circular hole is present at the bottom center, likely for a lanyard or attachment.

• NEXT Button (Red, Large): Used to advance the display to the next code or number.
• C Button/Indicator (Red, Small): Typically used for clearing or resetting functions, or as an indicator.
• Status Indicator (Grey, Small): May indicate power, signal transmission, or other operational status.

5. ترتیب کول

۲.۱. د بیټرۍ نصبول/چیک کول

The remote control comes with a 12V battery included. In most cases, the battery is pre-installed. If the remote does not respond, check the battery compartment for proper installation or replace the battery.

1. د ریموټ کنټرول شاته د بیټرۍ کمپارټ پوښ ومومئ.
2. په احتیاط سره پوښ ​​خلاص کړئ.
3. Insert or replace the 12V battery, ensuring correct polarity (+/-).
4. د بیټرۍ کمپارټ پوښ په خوندي ډول وتړئ.

5.2. Pairing with VISEL Display (If Required)

The ELIMINACODE remote control is designed to work with VISEL display models TD2, TD3, TD4, MD2, and MD3. In most cases, the remote is pre-configured. If the remote does not control the display, follow the pairing instructions provided with your specific VISEL display model. General steps may include:

1. Ensure the VISEL display is powered on.
2. Access the pairing mode on your VISEL display (refer to your display's manual).
3. While the display is in pairing mode, press and hold the بل button on the remote control for a few seconds until the display acknowledges the pairing.
4. Test the remote control's functionality.

6. عملیاتي لارښوونې

The ELIMINACODE remote control provides simple, intuitive operation for your VISEL display.

6.1. Advancing the Display Code

• To advance the displayed code or number on your VISEL display, simply press the large بل یو ځل تڼۍ.
• Each press will increment the display by one unit.

6.2. Clearing/Resetting the Display

• To clear the current code or reset the display, press the small C تڼۍ
• The exact function of the 'C' button may vary slightly depending on your specific VISEL display model. Refer to your display's manual for detailed information.

6.3. Operational Range

The remote control operates using a radio frequency of 433.92 MHz. Ensure there are no significant obstructions between the remote and the display for optimal performance. The effective range may vary based on environmental conditions.

7. ساتنه

7.1. پاکول

ریموټ کنټرول په نرم، وچ ټوکر سره پاک کړئ. د کثافاتو پاکوونکي یا محلولونه مه کاروئ، ځکه چې دا کولی شي c ته زیان ورسوي.asing او داخلي برخې.

7.2. د بیټرۍ بدلول

When the remote control's range decreases or it becomes unresponsive, it is likely time to replace the 12V battery. Follow the steps in Section 5.1 for battery replacement.

7.3. ذخیره کول

Store the remote control in a cool, dry place, away from direct sunlight and extreme temperatures, when not in use for extended periods.

8. ستونزه حل کول

9. مشخصات

10. تضمین او ملاتړ

For warranty information or technical support, please refer to the documentation provided with your original purchase or contact VISEL customer service directly. Contact details can typically be found on the manufacturer's official webسایټ