لینډی 38236

د لینډي ۴ پورټ HDMI ۲.۰ ۱۸G سپلیټر (ماډل ۳۸۲۳۶) لارښوونې لارښود

ماډل: 38236

1. پیژندنه

The Lindy 4 Port HDMI 2.0 18G Splitter is designed to distribute a single HDMI 2.0 source signal to up to four HDMI displays simultaneously. It supports resolutions up to 4K@60Hz 4:4:4 8bit, High-Dynamic Range (HDR), and HDCP 2.2, ensuring compatibility with a wide range of modern video content and devices. This device is suitable for applications requiring the display of high-quality video content across multiple screens.

کلیدي ځانګړتیاوې عبارت دي له:

  • Splits one HDMI 2.0 source to four HDMI displays.
  • Supports resolutions up to 4K@60Hz 4:4:4.
  • Compatible with HDR content.
  • HDCP 2.2 support for content protection.
  • EDID management for optimal display compatibility.

2. د خوندیتوب معلومات

مهرباني وکړئ د دې وسیلې له چلولو دمخه ټولې لارښوونې په دقت سره ولولئ. دا لارښود د راتلونکي حوالې لپاره وساتئ.

  • وسیله د اوبو یا رطوبت سره مه ښکاره کوئ.
  • د وسیلې د خلاصولو یا ترمیم کولو هڅه مه کوئ. ټولې خدمتونه وړ پرسونل ته راجع کړئ.
  • د ډیر تودوخې مخنیوي لپاره مناسب هوا ورکول ډاډمن کړئ.
  • یوازې چمتو شوي بریښنا اډاپټر وکاروئ.
  • وسیله د تودوخې سرچینو او مستقیم لمر څخه لرې وساتئ.

3. د بسته محتويات

ډاډ ترلاسه کړئ چې ټول توکي په کڅوړه کې شتون لري:

  • Lindy 4 Port HDMI 2.0 18G Splitter
  • د بریښنا اډاپټر
  • د لارښوونې لارښود

4. محصول ختم شوview

4.1 مخکښ پینل

Front panel of the Lindy 4 Port HDMI 2.0 18G Splitter

Image: Front panel of the Lindy 4 Port HDMI 2.0 18G Splitter, showing Power LED, Input LED, Output LEDs (OUT1-OUT4), Service port, and EDID switch.

  • د بریښنا څراغونه: کله چې وسیله فعاله شي، رڼا کوي.
  • په LED: کله چې د HDMI ان پټ سیګنال کشف شي، روښانه کیږي.
  • OUT1-OUT4 LEDs: Illuminate when an HDMI output signal is detected on the corresponding port.
  • خدمت: USB port for firmware updates (for manufacturer use only).
  • د EDID سویچ: Used to manage EDID settings.
    • STD: Standard EDID (1080p 2ch audio).
    • تلویزیون: Copies EDID from the display connected to Output 1.

4.2 شاته پینل

Rear panel of the Lindy 4 Port HDMI 2.0 18G Splitter

Image: Rear panel of the Lindy 4 Port HDMI 2.0 18G Splitter, showing HDMI OUT 1-4 ports, HDMI IN port, and DC 5V power input.

  • په HDMI کې: Connects to the HDMI source device (e.g., Blu-ray player, game console, PC).
  • HDMI بهر 1-4: Connects to HDMI displays (e.g., TV, monitor, projector).
  • DC 5V: د شامل شوي بریښنا اډاپټر لپاره د بریښنا ان پټ.

5. ترتیب او نصب کول

  1. د بریښنا بند وسایل: ډاډ ترلاسه کړئ چې د اتصال کولو دمخه د HDMI ټولې سرچینې وسایل او نندارې بندې دي.
  2. د HDMI سرچینه وصل کړئ: Connect an HDMI cable from your source device (e.g., media player, game console) to the HDMI-IN په سپلیټر کې پورټ.
  3. د HDMI ښودنې سره وصل کړئ: د HDMI کیبلونه له سره وصل کړئ HDMI بهر 1-4 ports on the splitter to your respective HDMI displays.
  4. Set EDID: Before powering on, set the EDID switch according to your requirements:
    • For standard 1080p 2ch audio output, set the switch to STD.
    • To copy the EDID from the display connected to Output 1, set the switch to TV. This ensures the splitter communicates the optimal resolution and audio format supported by your primary display to the source.
  5. بریښنا وصل کړئ: Connect the included 5V DC power adapter to the DC 5V port on the splitter, then plug the adapter into a suitable power outlet. The POWER LED on the front panel will illuminate.
  6. په وسایلو کې بریښنا: Power on your HDMI displays, then power on your HDMI source device. The IN and OUT LEDs should illuminate, indicating active connections.

The splitter will automatically detect the input signal and distribute it to all connected displays.

6. عملیاتي لارښوونې

Once connected and powered on, the Lindy 4 Port HDMI 2.0 18G Splitter operates automatically. The input signal will be duplicated and sent to all four connected displays.

6.1 د EDID مدیریت

The EDID (Extended Display Identification Data) switch allows you to control how the splitter communicates with the source device regarding supported resolutions and audio formats. This is crucial for ensuring compatibility and optimal display quality.

  • د STD حالت: Provides a standard 1080p resolution with 2-channel audio. This setting is useful if you encounter compatibility issues with specific displays or sources, or if you require a consistent output resolution across all displays.
  • د تلویزیون حالت: The splitter reads the EDID information from the display connected to HDMI بهر 1 and relays it to the source device. This allows the source to output the highest common resolution and audio format supported by your primary display. If the primary display is disconnected or powered off, the splitter may revert to a default EDID or use the EDID of the next active display.

It is recommended to adjust the EDID switch while the source and displays are connected but before the source outputs video, or to power cycle the source after changing the EDID setting for the changes to take effect.

7. ساتنه

  • پاکول: Disconnect the power adapter before cleaning. Use a soft, dry, lint-free cloth to wipe the exterior of the device. Do not use liquid cleaners or aerosols.
  • ذخیره کول: If storing the device for an extended period, disconnect all cables and store it in a cool, dry place away from direct sunlight.
  • وینټیلیشن: Ensure the device has adequate ventilation and that its vents are not blocked.

8. ستونزه حل کول

ستونزهاحتمالي لاملد حل لاره
No picture on display(s).
  • د کیبل اتصال خلاص.
  • Incorrect EDID setting.
  • Source or display not powered on.
  • د حل/تازه کولو کچه نامناسبه ده.
  • د HDMI کیبل نیمګړتیا.
  • Check all HDMI cable connections and ensure they are secure.
  • Try switching the EDID to "STD" mode.
  • Ensure all connected devices (source, displays) are powered on.
  • Adjust the source device's resolution to a lower setting (e.g., 1080p).
  • Test with a different, known-good HDMI cable.
وقفه ای سیګنال یا ځلیدل.
  • Long or low-quality HDMI cables.
  • د HDCP مطابقت ستونزه.
  • د بریښنا رسولو مسله.
  • Use shorter, high-quality HDMI 2.0 certified cables.
  • Ensure all devices support HDCP 2.2.
  • Verify the power adapter is securely connected and functioning correctly.
هیڅ آډیو نشته.
  • Audio settings on source/display.
  • EDID setting.
  • Check audio output settings on your source device and input settings on your display.
  • Try switching the EDID to "STD" mode, which defaults to 2-channel audio.

9. مشخصات

د ماډل شمیره38236
د HDMI معیاريHDMI 2.0
بانډ ویت18Gbps
د اعظمي پریکړه4K@60Hz 4:4:4 8bit
د HDCP ملاتړHDCP 2.2
د HDR ملاتړهو
د EDID ادارهSTD / TV Copy
د ننوتلو بندرونه1 x HDMI ډول یوه ښځینه
د تولید بندرونه4 x HDMI ډول یوه ښځینه
د بریښنا انډولDC 5V
ابعاد (LxWxH)7.48 x 5.91 x 2.36 انچه
د توکي وزن۰.۹۸۶ اونس (۲۷.۹۴ ګرامه)
د عملیاتي حرارت درجهله 0°C څخه تر 40°C (32°F څخه تر 104°F)
د ذخیرې د حرارت درجه-20°C ته 60°C (-4°F ته 140°F)
رطوبت20-90% RH (غیر کنډیشن)
موافقتRoHS

یادونه: مشخصات پرته له خبرتیا بدلیږي.

10. تضمین او ملاتړ

Lindy provides a manufacturer's warranty for this product. Please refer to the official Lindy website or your purchase documentation for detailed warranty terms and conditions. For technical support or assistance, please contact Lindy customer service.

EU Spare Part Availability Duration: 1 Year (as per product information).

د نورو معلوماتو لپاره، لیدنه وکړئ لینډی webسایټ.

اړوند اسناد - 38236

مخکېview د لینډي 3 او 5 پورټ HDMI 18G سویچ کارونکي لارښود
د LINDY 3 او 5 پورټ HDMI 18G سویچ لپاره د کارونکي لارښود، د خوندیتوب لارښوونې، ځانګړتیاوې، نصب، تصدیقونه، تضمین، او د ریسایکل کولو معلومات په تفصیل سره بیانوي. د 4K@60Hz او HDR ملاتړ کوي.
مخکېview د لینډي 8 پورټ HDMI 18G سپلیټر کارونکي لارښود
د LINDY 8 پورټ HDMI 18G سپلیټر (ماډل 38237) لپاره د کارونکي لارښود، د HDMI 2.0 18G سیګنالونو ویشلو لپاره مشخصات، نصب، عملیات، او د اطاعت معلومات توضیح کوي.
مخکېview د لینډي HDMI 18G آډیو استخراج کونکی (ماډل 38361) د کارونکي لارښود
د LINDY HDMI 18G آډیو استخراج کونکي (ماډل 38361) لپاره د کارونکي رسمي لارښود، د HDMI سرچینو څخه د ډیجیټل او انلاګ آډیو استخراج لپاره ځانګړتیاوې، مشخصات، نصب، او خوندیتوب لارښوونې توضیح کوي.
مخکېview LINDY 4x4 HDMI 4K60 میټریکس د ویډیو دیوال سکیلینګ کارونکي لارښود سره
د ویډیو دیوال سکیلینګ سره د LINDY 4x4 HDMI 4K60 میټریکس وپلټئ (ماډل 38238). دا کارن لارښود د هغې ځانګړتیاوې، مشخصات، تنظیم، د RS-232/LAN له لارې عملیات، د ویډیو دیوال جوړول، او د مسلکي AV نصبولو لپاره د ستونزو حل کولو توضیحات ورکوي.
مخکېview LINDY 50m HDMI 18G ریپیټر کارن لارښود
د LINDY 50m HDMI 18G ریپیټر لپاره د کارونکي لارښود، د HDMI سیګنالونو 50 مترو پورې غځولو لپاره د هغې ځانګړتیاوې، مشخصات، نصب کول، او د ستونزو حل کول توضیح کوي.
مخکېview LINDY 300m Fibre Optic HDMI 2.0 18G & IR Extender User Manual
Comprehensive user manual for the LINDY 300m Fibre Optic HDMI 2.0 18G & IR Extender, detailing installation, features, specifications, and control operations for high-quality 4K@60Hz signal extension.