پیژندنه
This manual provides instructions for the assembly, operation, and maintenance of your BRIO Double-Column Water Bottle Stand. This stand is designed to efficiently store 3- and 5-gallon water bottles, helping to organize your space.
شکل 1: Fully assembled BRIO Double-Column Water Bottle Stand with 10 water bottles.
تنظیم او مجلس
The BRIO Double-Column Water Bottle Stand is designed for easy assembly with minimal tools. Please follow these general steps:
- اجزا خلاص کړئ: Carefully remove all parts from the packaging. Verify that all components are present according to the included parts list (not provided in this manual, refer to product packaging).
- د چوکاټ راټولول: Connect the vertical support beams to the horizontal crossbars. Ensure all connections are secure.
- Install Shelves/Racks: Attach the bottle support racks to the assembled frame. These are designed to cradle 3- and 5-gallon bottles.
- د تنظیم وړ پښې وصل کړئ: Screw in the adjustable rubber feet to the bottom of the stand's legs. These feet protect flooring and allow for leveling on uneven surfaces.
- ځای په ځای کول: Position the assembled stand on a flat, stable surface. Adjust the rubber feet as needed to ensure the stand is level and stable before loading bottles.
Note: Specific assembly instructions and diagrams are typically included with the product packaging. Refer to those for detailed, step-by-step guidance.
عملیاتي لارښوونې
Using your BRIO Water Bottle Stand is straightforward:
- Loading Bottles: Gently place 3- or 5-gallon water bottles onto the designated racks. Ensure bottles are securely seated and balanced.
- ظرفیت: This 10-bottle model is designed to hold up to ten 3- or 5-gallon water bottles. Distribute the weight evenly across the stand.
- خوندیتوب: Always load bottles from the bottom up to maintain stability. Avoid placing bottles in a manner that could cause the stand to become top-heavy or unstable.
ساتنه
To ensure the longevity and appearance of your water bottle stand, follow these maintenance guidelines:
- پاکول: جوړونکی وړاندیز کوي لاسونه مینځل for product care. Use a soft cloth with mild soap and water to clean the metal frame. Avoid abrasive cleaners or scouring pads that could damage the finish.
- وچول: After cleaning, thoroughly dry all metal components to prevent rust or water spots.
- منظم معاینه: په دوره یي ډول ټول پیچونه او اړیکې وګورئ ترڅو ډاډ ترلاسه شي چې دوی کلک پاتې دي. د اړتیا په صورت کې هر ډول خلاص فاسټینرونه ټینګ کړئ.
- د پښو پیډونه: Inspect the rubber feet for wear and tear. Replace if damaged to maintain floor protection and stability.
د ستونزو حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| ولاړ په ټپه ولاړ یا بې ثباته دی. | Uneven floor surface; loose connections; improper bottle placement. | Adjust the rubber feet to level the stand. Tighten all assembly screws. Ensure bottles are evenly distributed and properly seated. |
| د راټولولو ستونزه. | Incorrect part orientation; missing tools. | د محصول سره چمتو شوي تفصيلي اسمبلۍ لارښوونو ته مراجعه وکړئ. ډاډ ترلاسه کړئ چې برخې په سمه توګه تنظیم شوي دي مخکې له دې چې ټینګ شي. |
| Bottles do not fit securely. | Incorrect bottle size; improper placement. | This stand is designed for standard 3- and 5-gallon water bottles. Ensure bottles are placed correctly on the curved supports. |
مشخصات
- نښه: بریو
- د ماډل شمیره: STM10BTGRY
- رنګ: 10-bottle (Grey)
- سټایل: عصري
- د پای ډول: وینیل
- د بوتل ظرفیت: 10 (3- or 5-gallon bottles)
- مجلس ته اړتیا ده: هو
- د محصول پاملرنې لارښوونې: لاسونه مینځل
- د توکي وزن: ۲.۴۵ پونډه
- د بسته ابعاد: 55 x 15.5 x 4 انچه
- UPC: 841545164907
تضمین او ملاتړ
Specific warranty information for the BRIO Double-Column Water Bottle Stand is not provided in this manual. Please refer to the product packaging or contact Brio customer service for details regarding warranty coverage and support options.
For additional assistance or inquiries, please visit the official Brio webسایټ ته مراجعه وکړئ یا د دوی د پیرودونکو ملاتړ څانګې سره اړیکه ونیسئ.
