CaDA I.BOT Code Robot Instruction Manual

1. پیژندنه

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your CaDA I.BOT Code Robot (Model C83001W). The I.BOT is a remote-controlled robot construction set consisting of 434 pieces, designed to stimulate imagination and develop hand-eye coordination. Once assembled, the robot can be controlled via an included remote control or a dedicated mobile application, featuring movable limbs and LED-illuminated eyes.

Figure 1.1: CaDA I.BOT Code Robot and its packaging. This image shows the assembled robot alongside its product box, highlighting its design and the "Dual Mode Control" feature.

۱.۱. د خوندیتوب مهم معلومات

• د عمر سپارښتنه: This product is suitable for children aged 6 years and up. Adult supervision is recommended during assembly and initial operation.
• د کوچنیو برخو خبرداری: The set contains small parts which may pose a choking hazard for children under 3 years of age. Keep all components out of reach of infants and toddlers.
• د بیټرۍ خوندیتوب:
  • Requires 2 x AA batteries (not included).
  • زاړه او نوي بیټرۍ مه ګډوئ.
  • الکلین، معیاري (کاربن-زنک)، یا د چارج وړ (نکل-کاډیمیم) بیټرۍ مه ګډوئ.
  • د سم قطبي (+ او -) سره بیټرۍ دننه کړئ.
  • په چټکۍ سره ختم شوي بیټرۍ لرې کړئ.
  • د بیټرۍ ټرمینل لنډ سرکټ مه کوئ.
• برقی اجزا: Handle the robot's electrical components with care. Do not expose to water or extreme temperatures.
• خوځنده برخې: Keep fingers, hair, and loose clothing away from moving parts (e.g., tracks, limbs) during operation to prevent entanglement or injury.

3. د بسته محتويات

Before beginning assembly, please verify that all components are present. The CaDA I.BOT Code Robot set includes:

• 434 x Building Block Pieces
• 1 x د ریموټ کنټرول واحد
• ۱ x لارښود لارښود (دا سند)
• Electronic components (motors, LED eyes, control board) integrated within specific blocks.

Note: Batteries (2 x AA) are not included and must be purchased separately.

4. تنظیم او مجلس

Follow the step-by-step instructions provided in the included pictorial guide to assemble your I.BOT robot. Assembly typically takes several hours depending on experience.

4.1 د شورا لارښوونې

1. اجزا خلاص کړئ: Carefully open the packaging and sort the building blocks by type or color to facilitate assembly.
2. Follow Pictorial Guide: Refer to the separate, detailed assembly booklet. Each step illustrates the required pieces and their placement. Pay close attention to the orientation of specialized parts and electronic components.
3. Connect Electronic Parts: Ensure all wires for motors and LED eyes are securely connected to the main control unit as indicated in the assembly guide. Incorrect connections may prevent the robot from functioning.
4. اړیکې تایید کړئ: Before completing the final steps, double-check all connections and ensure no wires are pinched.

4.2 د بیټرۍ نصب کول

The I.BOT robot requires 2 x AA batteries for operation. The battery compartment is typically located on the main body of the robot or the remote control unit.

1. Locate the battery compartment on the robot (refer to the assembly guide for exact location).
2. Using a small screwdriver (if required), open the battery compartment cover.
3. Insert 2 x AA batteries, ensuring correct polarity (+/-) as marked inside the compartment.
4. د بیټرۍ کمپارټ پوښ بدل کړئ او خوندي یې کړئ.
5. Repeat the process for the remote control unit if it also requires batteries (usually 2 x AAA, but check the remote itself).

شکل 4.1: مخکی view of the assembled CaDA I.BOT Code Robot. This image displays the robot's front, showing its LED eyes, track system, and movable arms.

5. Operating the I.BOT Robot

The I.BOT robot offers dual control modes: via the included remote control or a dedicated mobile application.

5.1 د ریموټ کنټرول عملیات

1. پاور آن: Ensure batteries are installed in both the robot and the remote control. Turn on the robot using the power switch (usually located near the battery compartment). Turn on the remote control.
2. جوړه کول: The robot and remote control should automatically pair. If not, refer to the remote control's specific instructions for pairing mode.
3. حرکت: Use the joysticks or directional buttons on the remote control to move the robot forward, backward, left, and right.
4. Limb Control: Dedicated buttons on the remote control will operate the robot's movable limbs and other functions, such as activating the LED eyes.

۴.۱ د موبایل اپلیکیشن کنټرول

1. اپلیکیشن ډاونلوډ کړئ: لټون the "CaDA I.BOT" or "CaDA Robot" app on your device's app store (iOS App Store or Google Play Store).
2. نصب او خلاص کړئ: اپلیکیشن نصب کړئ او خلاص یې کړئ.
3. بلوتوث پیوستون Ensure Bluetooth is enabled on your mobile device. Turn on the I.BOT robot. Within the app, select the option to connect to a new device. Select "I.BOT C83001W" from the list of available devices.
4. د کنټرول انٹرفیس: Once connected, the app will display a control interface. This typically includes virtual joysticks for movement, buttons for limb control, and options for programming simple sequences.
5. پروګرام کول (که چیرې تطبیق شي): The app may offer basic coding or sequence programming features. Refer to the app's in-app help or tutorials for detailed instructions on these advanced functions.

شکل 5.1: شاته view of the assembled CaDA I.BOT Code Robot. This image shows the robot from behind, detailing its track mechanism and the back of its head unit.

6. ساتنه

6.1 پاکول

• روبوټ او ریموټ کنټرول په نرم، وچ ټوکر سره پاک کړئ.
• Do not use harsh chemicals, abrasive cleaners, or water directly on the electronic components.
• Periodically check the tracks for any debris or hair that might impede movement.

6.2 ذخیره کول

• When not in use for extended periods, remove batteries from both the robot and the remote control to prevent leakage.
• Store the robot in a cool, dry place, away from direct sunlight and extreme temperatures.
• Keep the robot and its components in their original packaging or a suitable storage container to prevent loss of parts.

7. ستونزه حل کول

8. مشخصات

9. تضمین او ملاتړ

CaDA products are manufactured to high quality standards. While specific warranty details are not provided in this manual, please retain your proof of purchase for any potential warranty claims.

9.1 د پیرودونکي ملاتړ

For technical assistance, missing parts, or any inquiries regarding your CaDA I.BOT Code Robot, please contact the manufacturer or your retailer's customer service. When contacting support, please have your product model number (C83001W) and purchase information ready.

You may find additional support resources, FAQs, and contact information on the official CaDA website (if available, search online for "CaDA official webسایټ").