1. پیژندنه
This manual provides comprehensive instructions for the ThreeH AC10 Digital Wood Cube Alarm Clock. This device features a clear LED display, sound control, and multiple functions including time, date, temperature, and alarm settings. Please read this manual carefully to ensure proper operation and to fully utilize all features.
Image 1.1: The ThreeH AC10 Digital Wood Cube Alarm Clock showcasing its primary functions: Time, Alarm, Calendar, 3-Level Brightness, Temperature, and Snooze.
2. محصول ختم شوview
The ThreeH AC10 is designed with a modern wood cube aesthetic, integrating seamlessly into various home and office environments. Its key features include:
- د LED ښودنه: Shows time, date, and temperature.
- څو اړخیزه: Time (12/24H), Alarm (up to 3), Calendar, Temperature (F/C).
- د غږ کنټرول: Display activates with sound or touch, conserving energy.
- د تنظیم وړ روښانتیا: Three levels of display brightness.
- د دوه ګوني ځواک اختیارونه: USB cable or AAA batteries.
- Time Memory Function: Retains settings during power interruptions (with backup batteries).
انځور 2.1: مخکی view of the ThreeH AC10 Digital Wood Cube Alarm Clock.
3. ترتیب کول
3.1 د بریښنا رسول
The clock can be powered by either a USB cable or AAA batteries.
- د USB پاور: For continuous display and optimal performance, connect the provided USB cable to a 5V DC adapter (not included) or a USB port.
- د بیټرۍ ځواک: For portable use or as a backup, install 4 AAA batteries (not included). Note that battery power is primarily for the sound control mode to conserve energy, as continuous display will drain batteries quickly.
3.2 د بیټرۍ نصب کول
- د ساعت په شا کې د بیټرۍ کڅوړه ومومئ.
- د بیټرۍ پوښ خلاص کړئ.
- دوه نوي AAA بیټرۍ دننه کړئ، د سم قطبیت ډاډ ترلاسه کړئ (+/-).
- د بیټرۍ پوښ په خوندي ډول وتړئ.
Image 3.1: Battery compartment and USB cable connection.
۳.۱ د تڼۍ پیژندنه
د کنټرول تڼۍ د ساعت په شا کې موقعیت لري:
- سیټ: د تنظیم کولو حالتونو ته د ننوتلو او انتخابونو تایید لپاره کارول کیږي.
- UP: د ارزښتونو زیاتولو یا د مینو انتخابونو نیویګیټ کولو لپاره کارول کیږي.
- ښکته: د ارزښتونو کمولو یا د مینو انتخابونو نیویګیټ کولو لپاره کارول کیږي.
- بیا تنظیم کړئ: A small button (often recessed) to reset the clock to factory defaults. Use a thin object like a paperclip to press.
Image 3.2: Back panel with control buttons and power input.
4. عملیاتي لارښوونې
4.1 Basic Settings (Time, Date, Temperature Unit)
- فشار ورکړئ SET button once to enter the setting mode. The display will flash.
- کارول UP or ښکته د ارزښت تنظیمولو لپاره. مطبوعاتي SET تایید کول او راتلونکي ترتیب ته تلل.
- The sequence is typically: Year → Month → Day → 12/24H Format → Hour → Minute → Temperature Unit (Celsius/Fahrenheit).
- After setting the temperature unit, press SET بیا د ترتیب حالت څخه د وتلو لپاره.
4.2 د الارم ترتیبات
The clock supports up to three independent alarms (A1, A2, A3).
- From normal display mode, press SET repeatedly until 'A1' (or 'A2', 'A3') appears.
- فشار ورکړئ او ونیسئ SET to enter the alarm setting mode. The alarm hour will flash.
- کارول UP or ښکته to set the desired alarm hour, then press SET.
- کارول UP or ښکته to set the desired alarm minute, then press SET.
- The display will show 'ON' or '--' (OFF). Use UP or ښکته to enable (ON) or disable (OFF) the alarm, then press SET تصدیق کول.
- Repeat for A2 and A3 if needed.
Image 4.1: Setting multiple alarms (A1, A2, A3).
4.3 د سنوز فعالیت
When an alarm sounds, press any button (except RESET) to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (default snooze duration is typically 5 minutes, refer to specific product documentation if available for exact duration). To turn off the alarm completely, press the RESET button or let it ring for its full duration.
4.4 Display Modes (DP-1, DP-2)
The clock offers different display modes:
- DP-1 (Fixed Display): The display shows time continuously.
- DP-2 (Alternating Display): The display cycles between time, date, and temperature.
To switch between DP-1 and DP-2, press the UP button in normal display mode.
Image 4.2: Display modes DP-1 and DP-2.
4.5 Sound Control Mode (Energy-saving)
In sound control mode, the display will turn off after a short period to save energy. It will reactivate when a sound (e.g., clap, tap) or touch is detected.
- To enable/disable sound control, press the ښکته button in normal display mode.
- When sound control is active, the display will show 'SD' (Sound Detect) or similar indicator. When disabled, it may show '--' or remain continuously on (if powered by USB).
Image 4.3: Illustration of sound control activation.
4.6 د روښانتیا تنظیم کول
The display has three brightness levels (L1, L2, L3).
- فشار ورکړئ او ونیسئ UP button in normal display mode.
- The display will show the current brightness level (e.g., 'L3').
- کارول UP or ښکته to cycle through L1 (lowest), L2 (medium), and L3 (highest).
- خوشې کړئ UP د خپل انتخاب تایید لپاره تڼۍ.
Image 4.4: Brightness levels L1, L2, L3.
5. ساتنه
- پاکول: د ساعت سطحه په نرم او وچ ټوکر سره پاکه کړئ. د کثافاتو پاکوونکو یا محلولونو کارولو څخه ډډه وکړئ.
- د بیټرۍ بدلول: Replace all 4 AAA batteries simultaneously when the display dims or functions become erratic. Do not mix old and new batteries.
- ځای په ځای کول: ساعت په یوه مستحکم، فلیټ سطحه کې کیږدئ چې د مستقیم لمر وړانګو، سختې تودوخې او لوړې رطوبت څخه لرې وي.
6. ستونزه حل کول
- Display is off or not staying on:
a. Check if the clock is in Sound Control (SD) mode. Press the ښکته button to toggle this mode. If you desire a continuous display, ensure SD mode is off and the clock is powered via USB.
b. If using batteries, they might be low. Replace with fresh AAA batteries. - Difficulty setting time/alarms:
a. Ensure you are pressing and holding the SET button to enter the setting mode, and pressing it briefly to confirm each step.
b. Refer to sections 4.1 and 4.2 for detailed instructions. - Clock resets after power failure:
a. Ensure backup AAA batteries are installed and have sufficient charge. The batteries provide power memory during USB power interruptions. - ښودنه ډېره روښانه یا ډېره تیاره ده:
a. Adjust the brightness levels as described in section 4.6. - نه ښودنه:
a. Check power source. Ensure USB cable is securely connected or batteries are correctly installed and charged.
ب. فشار ورکړئ RESET button using a thin object to perform a factory reset.
7. مشخصات
| فیچر | تفصیل |
|---|---|
| برانډ | درې ایچ |
| د ماډل شمیره | AC10 |
| د ښودلو ډول | ډیجیټل LED |
| د بریښنا سرچینه | USB (DC 5V) / 4 x AAA Batteries |
| د محصول ابعاد | 2.5"W x 2.5"H (approx.) |
| د توکي وزن | 120 ګرامه (4.2 اونس) |
| مواد | Plastic with Wood Frame |
| ځانګړي ځانګړتیاوې | Adjustable Brightness, Sound Control, Time Memory, Multiple Alarms |
| UPC | 639510944711 |
8. تضمین او ملاتړ
For warranty information and customer support, please refer to the documentation included with your purchase or contact the seller directly. Keep your purchase receipt for any warranty claims.
