د سټیلټ هوا کمپرسور SAUQ-1105 کارن لارښود

1. پیژندنه

Thank you for choosing the STEALTH SAUQ-1105 1 Gallon Air Compressor. This ultra-quiet, oil-free compressor is designed for a variety of applications, including drilling, nailing, grinding, and inflation. Its lightweight and portable design, coupled with a powerful 1/2 HP induction motor, makes it an ideal tool for both professional and home use. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your air compressor.

شکل 1.1: مخکی view of the STEALTH SAUQ-1105 Air Compressor, showing the tank, regulator, and tool gauges.

۱.۱. د خوندیتوب مهم معلومات

WARNING: Failure to read and follow the operator's manual, all warnings, and operating instructions could result in death or serious injury.

2.1 Risk of Bursting

• Ensure the compressor outlet pressure is set lower than the maximum pressure rating of the spray gun or tool being used. Do not exceed 125 PSI.
• Do not weld or drill into the air tank. Any modification to the tank can compromise its structural integrity.
• Drain water from the tank after each use to prevent corrosion and maintain tank integrity.

2.2 Risk of Fire or Explosion

• Do not spray flammable or combustible liquids or paints near sparks, flames, pilot lights, or other ignition sources.
• Operate the compressor in a well-ventilated area. Keep the compressor at least 20 feet away from the spray area.
• Do not smoke while operating the compressor or using air tools.

۱.۳ د برقي شاک خطر

• Always connect the compressor to a properly grounded outlet.
• Do not operate the compressor in wet conditions or with wet hands.

2.4 Risk of Moving Parts

• لاسونه، پښې او جامې د حرکت کولو برخو څخه لرې وساتئ.
• Ensure the compressor is turned off and unplugged before performing any maintenance.

3. د محصول اجزا

Familiarize yourself with the key components of your STEALTH SAUQ-1105 Air Compressor:

• 1. Dual Gauges: Easy-to-read gauges display both tank pressure and regulated tool pressure.
• 2. Oil-Free Pump: Provides high performance and durability with less maintenance.
• 3. Cord Wrap Storage: Convenient hooks for wrapping the 6-foot power cord for easy storage and transport.
• 4. Rubber Pads: Located on the feet to reduce vibration and enhance stability during operation.
• 5. Air Pressure Regulator: Allows you to easily adjust the air pressure delivered to your tools.
• 6. Quick Connect Coupler: For easy and secure connection of air hoses and tools.
• 7. Drain Valve: Located at the bottom of the tank for easy removal of moisture after use.
• 8. Induction Motor: A durable and ultra-quiet motor designed for long life and efficient operation.
• 9. Thermal Overload Protector: Automatically shuts down the motor if it overheats to prevent damage.

Figure 3.1: Diagram illustrating the main components of the SAUQ-1105 Air Compressor.

شکل 3.2: پایview of key features and dimensions of the 1 Gallon Air Compressor.

4. ترتیب کول

Follow these steps to set up your air compressor for first use:

1. بسته بندي کول: کمپرسور په احتیاط سره د هغې له بسته بندۍ څخه لرې کړئ. د بار وړلو زیان لپاره معاینه کړئ.
2. ځای په ځای کول: Place the compressor on a firm, level surface in a clean, well-ventilated area. Ensure the rubber feet are making full contact with the surface to minimize vibration.
3. د بریښنا پیوستون: Connect the 6-foot power cord to a grounded 120-volt AC outlet. The compressor is designed for an easy cold start, requiring only 2.8 amps.
4. د هوا نلی ضمیمه کړئ: Connect your air hose to the quick connect coupler on the compressor. Ensure a secure connection.
5. Attach Air Tool: Connect your desired air tool (e.g., nailer, drill, inflator) to the other end of the air hose.

5. عملیاتي لارښوونې

Operating your STEALTH SAUQ-1105 Air Compressor is straightforward:

1. پاور آن: Turn on the compressor using the power switch. The motor will start and begin to fill the tank. The tank gauge will show the increasing فشار.
2. فشار تنظیم کړئ: Once the tank is full (up to 125 PSI), use the air pressure regulator knob to set the desired working pressure for your tool. Observe the tool gauge to ensure the correct pressure is set.
3. کار پیل کړئ: You can now operate your air tool. The compressor will automatically cycle on and off to maintain the set pressure in the tank as you use air.
4. غوښتنلیکونه: This compressor is suitable for various tasks including:
   • برمه کول: Powering air drills for various materials.
   • Nailing/Brad Nailing: Ideal for finishing nailers and brad nailers for trim work and small projects.
   • پیسول: For light grinding tasks with appropriate air grinders.
   • انفلاسیون: Inflating tires, sports equipment, and other inflatables.
5. بندول: When finished, turn off the compressor and disconnect the air hose and tools.

Figure 5.1: The SAUQ-1105 Air Compressor is suitable for a wide range of applications, including drilling, nailing, and inflation.

Figure 5.2: Demonstrating the use of the compressor for tire inflation.

Figure 5.3: The portable design allows for use in various settings, including job sites for tasks like framing.

6. ساتنه

The STEALTH SAUQ-1105 features an oil-free pump, significantly reducing maintenance requirements. However, regular care is still essential for optimal performance and longevity:

• هره ورځ د ټانک پاکول: After each use, or at least daily, open the drain valve at the bottom of the tank to release any accumulated moisture. This prevents rust and extends the life of the tank.

Figure 6.1: The drain valve is used to remove moisture from the air tank after the compressor is shut off.

• پاک هوا فلټر: Periodically check and clean the air filter to ensure proper airflow and prevent dust from entering the motor.
• نلۍ او اتصالونه معاینه کړئ: Regularly check air hoses for cracks or leaks and ensure all connections are tight.
• په سمه توګه ذخیره کول: Store the compressor in a clean, dry environment when not in use.

7. ستونزه حل کول

If you encounter issues with your STEALTH SAUQ-1105 Air Compressor, refer to the following common problems and solutions:

شکل 7.1: اړخ view of the compressor, highlighting the location of the reset button for the thermal overload protector.

8. مشخصات

Figure 8.1: The induction motor contributes to the ultra-quiet operation, with a noise level of less than 58dB.

Figure 8.2: Chart indicating the compatibility of the compressor with various air tools for continuous and intermittent use.

9. تضمین او ملاتړ

Your STEALTH SAUQ-1105 Air Compressor comes with a د ژوند محدود تضمین. This warranty covers defects in materials and workmanship under normal use. Please refer to the warranty card included with your product for full terms and conditions.

For technical support, warranty claims, or replacement parts, please contact Stealth customer service. You can also visit the official Stealth store for more information and product resources:

Visit the Stealth Store