Herdio 5.25'' Home Audio Package Wall Mount Bluetooth Amplifier Receiver System with In-Ceiling Wall Passive Speakers (Model HCS 528-16BT) Instruction Manual

1. د خوندیتوب معلومات

Please read all safety instructions carefully before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• د بریښنا سرچینه: یوازې چمتو شوي بریښنا اډاپټر وکاروئ. ډاډ ترلاسه کړئ چې د بریښنا رسولو حجمtage د محصول اړتیاوې پوره کوي.
• اوبه او رطوبت: Do not expose this product to water, moisture, or extreme humidity. Avoid installation in areas where water contact is possible.
• تودوخه: Do not install near heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
• وینټیلیشن: د شاوخوا شاوخوا مناسب هوا ورکول ډاډمن کړئ amplifier unit. Do not block any ventilation openings.
• لګول: Installation should be performed by qualified personnel following local electrical codes. Ensure all wiring is secure and properly insulated.
• پاکول: Disconnect power before cleaning. Use a dry cloth only. Do not use liquid cleaners or aerosol cleaners.
• خدمت کول: د دې محصول پخپله خدمت کولو هڅه مه کوئ. ټول خدمتونه وړ خدماتي پرسونل ته راجع کړئ.

2. محصول ختم شوview

The Herdio 5.25'' Home Audio Package provides a versatile sound solution for various indoor environments. It includes a wall-mount Bluetooth amplifier receiver and two 5.25-inch in-ceiling passive speakers. The system supports multiple audio input options, including Bluetooth, AUX, and USB, along with a microphone input for paging or announcements.

2.1. Wall Mount Bluetooth Ampژوندی ترلاسه کونکی

دا تړون amplifier unit is designed to fit into a standard wall plate, offering convenient access to controls and connectivity. It features a master volume knob, input selection switch, USB port for media playback and device charging, a 3.5mm AUX-in jack, and a 1/4'' MIC-in jack.

شکل 1: دیوال غر Amplifier Controls. This image displays the front panel of the wall-mount amplifier, detailing the power LED, input selection switch (AUX, BT, MIC), USB port, master volume/power knob, MIC IN jack, and AUX IN jack.

Figure 2: USB Interface. This image shows a USB flash drive inserted into the USB input port on the wall-mount amplifier, illustrating its function for media playback or device charging.

2.2. 5.25-inch In-Ceiling Passive Speakers

The system includes two 5.25-inch passive speakers designed for flush mounting in ceilings or walls. These speakers are engineered to reproduce clear sound with good responsiveness, suitable for various audio applications.

Figure 3: In-Ceiling Speaker Design. This image highlights the speaker's design, emphasizing its powerful bass capabilities and integrated coaxial tweeter for balanced audio output.

۲. په بکس کې څه دي؟

په احتیاط سره محتويات خلاص کړئ او ډاډ ترلاسه کړئ چې ټول توکي شتون لري:

• 1x Bluetooth In-Wall Audio Receiver Wall Plate
• 1x 12V بریښنا رسول
• 2x Screws for Wall Plate Installation
• 2x 5.25-inch In-Ceiling Speakers (Model HCS-528)
• ۲x د سپیکر تارونه
• 1x User Manual for Ampلايف
• 1x User Manual for Speakers
• 2x Gaskets for Speakers
• 1x Cutout Template for Speakers

Figure 4: Package Contents. This image displays all components included in the Herdio 5.25'' Home Audio Package, laid out for verification.

4. ترتیب کول

4.1. دیوال غر Ampژوندی نصب

1. دیوال چمتو کړئ: Ensure you have a standard electrical wall box available for installation.
2. د بریښنا کیبل سره نښلول: Connect the 12V DC power cable (red positive, black negative) to the two-pin connector on the back of the ampلایف ماډل.
3. د آډیو کیبل سره وصل کړئ: Connect the stereo input audio cable to the three-pin connector on the back of the ampلایف ماډل.
4. پورته کول Ampژوندی: په احتیاط سره دننه کړئ amplifier module into the wall box. Secure it using the provided screws.
5. د مخ پلیټ ضمیمه کړئ: Place the decorative faceplate over the ampخوندي یې کړئ او خوندي یې کړئ.

شکل 5: دیوال غر Amplifier Installation. This image illustrates the process of installing the wall-mount amplifier into a standard electrical box.

4.2. Ceiling Speaker Installation

1. ځای ټاکل: Choose appropriate locations in the ceiling or wall for the speakers, ensuring no obstructions behind the surface.
2. کټ خلاصول: Use the provided cutout template to mark and cut a circular opening in the ceiling/wall. The cutout diameter is 7.3 inches (18.5 cm).
3. Remove Speaker Grille: Gently remove the speaker grille using a small tool or screwdriver.
4. سپیکر داخل کړئ: Insert the speaker into the cutout opening.
5. خوندي سپیکر: Tighten the speaker clips with screws to firmly secure the speaker in place.
6. ګریل بدل کړئ: Carefully place the speaker grille back onto the speaker.

Figure 6: Installation Dimensions. This diagram provides the total speaker diameter (8.46 inches / 21.5 cm), cutout diameter (7.3 inches / 18.5 cm), speaker depth (4.33 inches / 11 cm), and wall plate dimensions (4.5 inches / 11.43 cm height, 2.75 inches / 6.89 cm width).

Figure 7: Removing Speaker Grille. This image shows how to carefully remove the speaker's protective grille.

Figure 8: Securing Speaker Clips. This image demonstrates tightening the speaker clips with screws to ensure a secure fit in the ceiling or wall.

Figure 9: Replacing Speaker Grille. This image shows the final step of placing the speaker grille back onto the installed speaker.

4.3. د سیسټم تار کول

1. د سپیکر تارونه له سپیکرونو سره وصل کړئ: Connect the provided speaker wires to the terminals on the back of each speaker. Ensure red wire connects to positive (+) and black wire to negative (-).
2. د سپیکر تارونه سره وصل کړئ Ampژوندی: Connect the other end of the speaker wires to the speaker output terminals on the back of the wall-mount amplifier. Use a screwdriver to loosen the terminal screws, insert the wires (red to SPK+, black to SPK-), and tighten the screws to secure the connection.
3. د بریښنا رسولو سره نښلول: Plug the 12V power supply into a standard electrical outlet and connect its DC plug to the 12V DC input jack on the wall-mount ampلايف

5. عملیاتي لارښوونې

۶.۱. د بریښنا فعالول/بندول او د حجم کنټرول

To power on the system, turn the master volume knob clockwise. You will hear an audible 'drop' sound, and the power LED (PWR) will illuminate. Continue turning the knob clockwise to increase the volume. To power off, turn the knob counter-clockwise until it clicks.

د ننوت ټاکنه

د ننوتلو انتخاب سویچ وکاروئ amplifier's front panel to choose between AUX, BT (Bluetooth), or MIC inputs.

5.3. د بلوتوث جوړه کول

1. Switch the input selector to 'BT'. The Bluetooth LED will flash, indicating it is in pairing mode.
2. په خپل ګرځنده وسیله (سمارټ فون، ټابلیټ، او نور) کې، بلوتوټ فعال کړئ او د شته وسایلو لټون وکړئ.
3. Select 'Herdio' from the list of available devices to pair.
4. Once successfully paired, the Bluetooth LED on the amplifier will remain steadily lit.
5. You can now play audio from your device through the Herdio speaker system.

5.4. Using USB Input

Insert a USB flash drive into the USB INPUT port for media playback. The amplifier will automatically detect and play audio files. This port also functions as a charging port for compatible devices (5V/1A).

5.5. Using AUX-In

Connect an external audio device (e.g., MP3 player, TV) to the 3.5mm AUX IN jack using a stereo audio cable. Switch the input selector to 'AUX' to play audio from the connected device.

5.6. Using MIC-In

Connect a microphone to the 1/4'' MIC IN jack. Switch the input selector to 'MIC' for microphone input. This feature is suitable for paging or making announcements.

6. ساتنه

To ensure the longevity and optimal performance of your Herdio audio system, follow these maintenance guidelines:

• پاکول: د پاکولو لپاره نرم، وچ ټوکر وکاروئ amplifier faceplate and speaker grilles. Avoid abrasive cleaners, solvents, or harsh chemicals.
• د دوړو لرې کول: Regularly dust the speaker grilles to prevent accumulation that could affect sound quality.
• د چاپیریال شرایط: Keep the system in a dry environment, away from direct sunlight, extreme temperatures, and excessive dust.
• د تارونو معاینه: Periodically check all wiring connections for tightness and signs of wear. Loose connections can lead to poor sound quality or intermittent operation.

7. ستونزه حل کول

If you encounter issues with your Herdio audio system, refer to the following common problems and solutions:

8. مشخصات

9. تضمین او ملاتړ

This Herdio product is covered by a د ۵ کلن خدمت تضمین د پیرود نیټې څخه. دا تضمین د عادي استعمال لاندې د تولید نیمګړتیاوې او کاري وړتیا پوښي.

تضمین د دې له امله رامینځته شوي زیان نه پوښي:

• ناسم نصب او عملیات.
• Accidents, misuse, abuse, or negligence.
• غیر مجاز ترمیم یا ترمیم.
• د برېښنا څپې یا برېښنا.

For warranty claims, technical support, or customer service, please contact Herdio customer support through your retailer or visit the official Herdio webد اړیکو معلوماتو لپاره سایټ.