پیژندنه
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw. Please read these instructions carefully before using the tool to ensure safe and optimal performance. This tool is designed for cutting wood and similar materials.
د خوندیتوب لارښوونې
د بریښنا وسیلې عمومي خوندیتوب خبرداری:
- د کاري ساحې خوندیتوب: Keep the work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- بریښنایی خوندیتوب: د ځمکې یا ځمکې لاندې سطحونو سره د بدن تماس څخه ډډه وکړئ لکه پایپونه، ریډیټرونه، رینجونه، او یخچالونه. که ستاسو بدن په ځمکه کې وي یا په ځمکه کې وي د بریښنا شاک ډیر خطر شتون لري.
- شخصي خوندیتوب: Always wear appropriate personal protective equipment (PPE) including eye protection, hearing protection, and a dust mask. Stay alert, watch what you are doing, and use common sense when operating a power tool.
- د بریښنا وسیلې کارول او ساتنه: Ensure the switch is in the off-position before connecting to the battery pack, picking up, or carrying the tool. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Use the correct power tool for your application. Do not force the power tool.
- ساتنه: د بریښنا وسایل او لوازم ساتل. د حرکت کولو برخو غلط تنظیم یا پابند کول ، د برخو ماتول ، او کوم بل حالت چې ممکن د بریښنا وسیلې فعالیت اغیزه وکړي چیک کړئ.
Specific Circular Saw Safety Warnings:
- لاسونه د قطع کولو ساحې او تیغ څخه لرې وساتئ. د ورک پیس لاندې مه ورشئ.
- د پرې کولو ژوروالی تنظیم کړئ to the thickness of the workpiece.
- Never hold the workpiece in your hands or across your leg while cutting. Secure the workpiece to a stable platform.
- Check the lower guard for proper closing before each use. Do not operate the saw if the lower guard does not move freely and close instantly.
- Always use blades of the correct size and shape for the arbor hole.
- هیڅکله خراب یا غلط بلیډ واشیر یا بولټ مه کاروئ.
محصول پای ته ورسیدview
Familiarize yourself with the components of your Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw before operation.
Image: The Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw, showcasing its red and grey housing, ergonomic handle, blade guard, and robust base plate. The saw blade is clearly visible, highlighting the tool's design for portability and ease of use.
مهمې برخې:
- اصلي لاسوند: Ergonomic grip for primary control and operation.
- مرستندویه لاستی: Provides additional stability and control during cutting.
- آن/بند سویچ: موټور فعال او غیر فعالوي.
- سپینډل لاک: Button used to lock the spindle for safe and easy saw blade changes.
- د تیغ ساتونکی: Retractable guard that protects the user from the rotating blade.
- Base Plate (Saw Table): The flat surface that rests on the workpiece, guiding the saw during cuts.
- د ژوروالي تنظیم کولو لیور: Mechanism for setting the desired cutting depth.
- د بیول تنظیم کولو لیور: Mechanism for setting the desired cutting angle for bevel cuts.
- د تورو تیغ: The cutting accessory, typically a 165mm diameter blade with a 20mm arbor hole.
- Dust Extraction Adapter: Port for connecting a dust collection system to minimize sawdust.
- د بیټرۍ پیک ریسیپټیکل: Slot for inserting the Einhell Power X-Change 18V battery pack (battery not included).
چمتو کول
1. د بیټرۍ نصب کول
Ensure the tool is switched off before installing or removing the battery pack.
- Align the battery pack with the receptacle on the tool.
- د بیټرۍ کڅوړه په کڅوړه کې واچوئ تر هغه چې په خوندي ډول ځای ته راشي.
- د لرې کولو لپاره، د بیټرۍ په پیک کې د خوشې کولو تڼۍ فشار ورکړئ او بهر یې وغورځوئ.
2. Saw Blade Installation
Always disconnect the battery pack before changing the saw blade to prevent accidental startup.
- د سپینډل لاک تڼۍ فشار ورکړئ او ونیسئ ترڅو تیغ د څرخیدو مخه ونیسي.
- Use the provided wrench to loosen the blade retaining screw by turning it clockwise (this is a left-hand thread).
- بهرنۍ فلانج او زوړ آری تیغ لرې کړئ.
- Clean the inner flange and the blade mounting area thoroughly.
- Place the new saw blade onto the inner flange, ensuring the rotation direction arrow on the blade matches the arrow on the saw's housing.
- Replace the outer flange and tighten the blade retaining screw counter-clockwise (left-hand thread) firmly with the wrench while holding the spindle lock.
۳. د پرې کولو ژوروالی تنظیمول
The cutting depth should be set so that the blade teeth protrude slightly below the workpiece, typically by about 2-3 mm, for efficient cutting and reduced kickback.
- د ژور تنظیم کولو لیور خلاص کړئ.
- Move the base plate up or down to achieve the desired cutting depth, using the depth scale as a guide.
- Tighten the depth adjustment lever securely to lock the setting.
۳. د بیول زاویه تنظیم کول
The saw can make bevel cuts up to 45 degrees for angled cuts.
- د بیول تنظیم کولو لیور خلاص کړئ.
- Tilt the saw to the desired angle, indicated on the bevel scale.
- Tighten the bevel adjustment lever securely to lock the angle.
عملیاتي لارښوونې
1. پیل او ودرول
- To start the saw, first press the safety lock-off button (if present), then squeeze the trigger switch.
- To stop the saw, simply release the trigger switch. The blade will come to a stop.
۶. پرې کول
- د کاري ټوټې د cl سره په کلکه خوندي کړئamps to prevent movement during cutting.
- Position the saw on the workpiece with the front of the base plate resting on the material. Ensure the blade is not touching the workpiece before starting the saw.
- Start the saw and allow the blade to reach full speed before engaging the material.
- Slowly guide the saw through the workpiece, maintaining a steady, even pressure. Do not force the saw, as this can lead to kickback or damage to the tool/blade.
- After completing the cut, release the trigger switch and allow the blade to stop completely before lifting the saw from the workpiece.
۴. د دوړو استخراج
For a cleaner work environment and improved visibility, connect a suitable dust extraction system (e.g., a shop vacuum) to the dust extraction adapter on the saw.
ساتنه
پاکول
Regularly clean the ventilation slots and the saw blade area to prevent dust buildup, which can affect performance and motor life. Use a soft brush or compressed air. Do not use water or solvents, as these can damage the tool's electrical components or plastic parts.
د بلیډ ساتنه
Inspect the saw blade regularly for sharpness, cracks, or missing teeth. A dull or damaged blade can cause binding, kickback, and poor cut quality. Replace dull or damaged blades immediately with a suitable replacement blade (165mm diameter, 20mm arbor hole).
ذخیره کول
Store the saw in a dry, secure place, out of reach of children. Always remove the battery pack before storing the tool for extended periods.
د ستونزو حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| سور پیل نه کوي | Battery not charged or improperly installed; safety lock-off not engaged. | Charge battery, ensure proper installation, press safety lock-off before trigger. |
| Saw cuts slowly or binds | Dull or incorrect blade; incorrect cutting depth; forcing the saw; workpiece not secured. | Replace blade, adjust depth, reduce feed pressure, secure workpiece firmly. |
| ډیر وایبریشن | Damaged or unbalanced blade; loose components; worn bearings. | Inspect/replace blade, check for loose screws and tighten, contact service if bearings are suspected. |
| د پرې کولو کیفیت خراب (ناڅاپي څنډې، ټوټې ټوټې کېدل) | Dull blade; incorrect blade type for material; too fast feed rate. | Replace blade, use appropriate blade for material, reduce feed rate. |
مشخصات
- ماډل: Einhell TE-CS 18/165-1 Li-Solo
- والیtage: 18 V (Battery Operated)
- د بار وړلو سرعت: 4,200 دقیقې⁻¹
- د تیغ قطر: 165 ملي متره
- Arbor Hole Diameter: 20 ملي متره
- Max. Cutting Depth (90°): نږدې 54 ملي متره
- Max. Cutting Depth (45°): نږدې 35 ملي متره
- د توکي وزن: 2.72 کیلوګرامه (بغیر بیټرۍ)
- د تیغ مواد: د لوړ سرعت فولاد
- د غاښونو شمیر: 24
- ځانګړې ځانګړنه: بې سیم عملیات
- شاملې برخې: بلیډ ولیدل
- یادونه: Battery and charger are not included and must be purchased separately as part of the Einhell Power X-Change system.
تضمین او ملاتړ
This Einhell product comes with a limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Einhell website. For technical support, service, or to inquire about replacement parts, please contact Einhell customer service through their official channels.
