1. پیژندنه
This manual provides detailed instructions for the proper use, setup, operation, and maintenance of the PCE Instruments PCE-CT 25FN Coating Thickness Gauge. This device is designed for non-destructive measurement of coating thickness on both ferrous (magnetic) and non-ferrous (non-magnetic) metal substrates. Please read this manual thoroughly before operating the device to ensure accurate measurements and safe handling.
2. محصول ختم شوview
The PCE-CT 25FN is a compact and portable coating thickness gauge featuring a fast measuring frequency and an intuitive LCD display. It is suitable for various applications requiring precise coating thickness measurements.
کلیدي ځانګړتیاوې:
- Small and compact design for portability.
- Fast measuring frequency for efficient operation.
- Includes a calibration set for accurate adjustments.
- Multiple measurement units can be selected (µm, mm, mils).
- Supports continuous measurements.
شکل 1: PCE Instruments PCE-CT 25FN Coating Thickness Gauge, showing its ergonomic design and LCD display.
شکل 2: مخکی view of the PCE-CT 25FN, highlighting the LCD screen and control buttons.
شکل 3: اړخ view of the PCE-CT 25FN, illustrating the integrated measurement sensor at the top.
3. ترتیب کول
3.1 د بیټرۍ نصب کول
- د وسیلې په شا کې د بیټرۍ د برخې پوښ ومومئ.
- د خلاصولو لپاره یې پوښ سلائډ یا خلاص کړئ.
- Insert a 9V block battery, ensuring correct polarity (+/-).
- د بیټرۍ کمپارټ پوښ په خوندي ډول بدل کړئ.
3.2 بریښنا کول / بندول
Press and hold the power button (usually marked with a power symbol) to turn the device on or off. The LCD display will illuminate upon successful power-on.
4. عملیات
۷.۱ اساسي اندازه ګیري
- ډاډ ترلاسه کړئ چې وسیله فعاله ده.
- Select the appropriate measurement mode (Fe for ferrous, NFe for non-ferrous) if not in auto-detection mode. Refer to the device's specific button functions for mode selection.
- Place the sensor head firmly and perpendicularly onto the coated surface to be measured.
- The measurement reading will appear on the LCD display.
- Lift the device from the surface to prepare for the next measurement.
شکل 4: The PCE-CT 25FN being used to measure coating thickness on a flat metal surface.
شکل 5: The PCE-CT 25FN measuring coating thickness on a curved metal railing, demonstrating its versatility.
4.2 د واحد انتخاب
The PCE-CT 25FN supports measurements in micrometers (µm), millimeters (mm), and mils. Consult the device's button layout for the specific button or menu option to cycle through these units.
4.3 د دوامداره اندازه کولو حالت
For continuous measurement, activate the respective mode (refer to your device's specific instructions). In this mode, the device will continuously display readings as it is moved across a surface, allowing for quick scanning of larger areas.
5. کیلیبریشن
Regular calibration ensures the accuracy of your PCE-CT 25FN. The device comes with a set of calibration foils and a zero plate. Follow these general steps for calibration:
- ډاډ ترلاسه کړئ چې وسیله پاکه او له کثافاتو څخه پاکه ده.
- Place the zero plate (uncoated metal substrate) on a stable surface.
- Perform a zero calibration by placing the sensor on the zero plate and following the on-screen prompts or button sequence.
- Select a calibration foil of known thickness.
- Place the foil on the zero plate and measure its thickness. Adjust the device according to the manual's instructions until the reading matches the foil's known thickness.
- Repeat with other foils if multi-point calibration is required.
شکل 6: The PCE-CT 25FN device shown alongside its included calibration foils and a printed user manual, essential for accurate setup and use.
6. ساتنه
6.1 پاکول
Wipe the device, especially the sensor head, with a soft, dry cloth after each use. Do not use abrasive cleaners or solvents. Ensure no moisture enters the device.
6.2 ذخیره کول
Store the PCE-CT 25FN in its original packaging or a protective case when not in use. Keep it in a dry environment, away from extreme temperatures and direct sunlight. Remove the battery if the device will not be used for an extended period.
7. ستونزه حل کول
- وسیله نه فعالیږي: د بیټرۍ نصب کول وګورئ او ډاډ ترلاسه کړئ چې بیټرۍ کافي چارج لري. که اړتیا وي نو بدل یې کړئ.
- ناسم لوستل: Perform a calibration as described in Section 5. Ensure the sensor head is clean and placed firmly and perpendicularly on the surface. Verify the correct measurement mode (Fe/NFe) is selected.
- ښودنه د خطا پیغام ښیې: Refer to the specific error codes in the full product manual (if available) or contact customer support.
- Battery low indicator: Replace the 9V block battery promptly to ensure continued accurate operation.
8. مشخصات
| پیرامیټر | ارزښت |
|---|---|
| د اندازه کولو رینج | 0 ... 1500 µm |
| د اندازه کولو دقت | ± (3% + 1 µm) |
| Resolution (0-100 µm) | 0.1 µm |
| Resolution (>100 µm) | 1 µm |
| واحدونه | µm، mm، mils |
| Smallest Curvature (Convex) | 5 ملي متره |
| Smallest Curvature (Concave) | 25 ملي متره |
| Smallest Measuring Area | Ø 20 mm |
| Minimum Substrate Thickness (Fe) | 0.3 ملي متره |
| Minimum Substrate Thickness (NFe) | 0.05 ملي متره |
| د اندازه کولو اندازه | مکس 2 Hz |
| د بریښنا رسول | د 9 V بلاک بیټرۍ |
| عملیاتي شرایط | -10 ... 50 °C, 20 ... 90% RH non-condensing |
| د ذخیره کولو شرایط | -10 ... 60 °C, 20 ... 90% RH non-condensing |
| ابعاد | 143 x 85 x 39 mm |
| وزن | نږدې 100 ګرامه |
| د کور جوړولو مواد | ABS |
9. د خوندیتوب معلومات
- Do not attempt to open or modify the device. This may void the warranty and cause damage.
- Keep the device away from strong magnetic fields, high temperatures, and corrosive environments.
- د وسیلې له مینځه وړلو یا د قوي تاثیراتو تابع کولو څخه ډډه وکړئ.
- د ځایی مقرراتو سره سم د بیټرۍ تصفیه کول.
- دا وسیله د طبي کارونې لپاره ندي.
10. تضمین او ملاتړ
For warranty information, technical support, or service inquiries regarding your PCE Instruments PCE-CT 25FN Coating Thickness Gauge, please contact PCE Instruments directly through their official website or the contact details provided with your purchase. Please have your model number (PCE-CT 25FN) and purchase date available when contacting support.
