د سنکو T8 LED ټیوب لایټ بلبونه (ماډل T8_BY_C-18W-6K-50PK) لارښوونې لارښود

1. پیژندنه

This manual provides essential information for the safe and proper installation, operation, and maintenance of your Sunco T8 LED Tube Light Bulbs. Please read this manual thoroughly before installation and retain it for future reference.

Image 1.1: Sunco T8 LED Tube Light Bulb. This image displays a single T8 LED tube, highlighting its design and printed specifications such as model number, wattage، او د رنګ تودوخه.

2. د خوندیتوب معلومات

خبرداری: د بریښنا شاک خطر. د نصبولو لپاره د لمریز بریښنایی سیسټمونو پوهه اړینه ده. که وړ نه وي، د نصبولو هڅه مه کوئ. د وړ بریښنایی سره اړیکه ونیسئ.

• تل د نصبولو، معاینې یا لرې کولو دمخه په سرکټ بریکر کې بریښنا بنده کړئ.
• These T8 LED tubes are Type B (Ballast Bypass) and require the removal of the existing ballast. Failure to remove the ballast and rewire the fixture correctly may damage the LED tube and create a serious fire hazard.
• د عرضې حجم ډاډمن کړئtage is compatible with the LED tubes (100-240V AC, 60Hz).
• Do not use with dimmers unless explicitly stated as dimmable. These specific bulbs are non-dimmable.
• Do not install in fixtures that are not designed for T8 LED tubes or that have incompatible lamp لرونکی
• دا محصول یوازې د داخلي کارونې لپاره دی.
• Do not look directly at the operating LED light source.
• UL certified for safety and performance.

3. د بسته محتويات

ستاسو کڅوړه کې لاندې توکي شامل دي:

• Sunco T8 LED Tube Light Bulbs (Quantity: 50)
• د لارښود لارښود (دا سند)

Image 3.1: A pack of 50 Sunco T8 LED Tube Light Bulbs. This image shows multiple LED tubes, representing the typical package quantity.

4. مشخصات

5. ترتیب او نصب کول

These Sunco T8 LED tubes are Type B (Ballast Bypass) and require modification of your existing fluorescent fixture. This process involves removing the old ballast and rewiring the fixture to directly power the LED tubes. It is recommended that installation be performed by a qualified electrician.

5.1. د نصب کولو دمخه چک لیست

• Verify power is OFF at the circuit breaker before starting.
• Ensure the fixture is compatible with 4-foot T8 LED tubes.
• Confirm you have the necessary tools: wire cutters, wire strippers, screwdriver, electrical tape, and wire nuts.

5.2. Ballast Removal and Rewiring (Single-Ended Power)

The Sunco T8 LED tubes are designed for Single-Ended Power (SEP), meaning power is supplied to one end of the tube only. This requires specific wiring modifications.

1. بریښنا بند کړئ: Locate the circuit breaker controlling the fixture and switch it to the OFF position. Verify power is off using a voltage ټیسټر.
2. Remove Existing Fluorescent Tubes: Carefully remove the old fluorescent tubes from the fixture.
3. د بالسټ لاسرسی: Open the fixture to expose the wiring and the ballast. The ballast is typically a rectangular box.
4. Disconnect Ballast: Cut all wires connected to the ballast. Ensure no live wires remain connected to the ballast.
5. Remove Ballast: Unscrew and remove the ballast from the fixture.
6. Identify Live and Neutral Wires: Identify the main incoming Live (L) and Neutral (N) wires from the power supply.
7. Rewire for Single-Ended Power:
   • Connect the incoming Live (L) wire to the pins on one end of the lamp holder (tombstone).
   • Connect the incoming Neutral (N) wire to the pins on the other end of the same lamp holder (tombstone).
   • For multiple tubes in the same fixture, ensure each tube's designated "power-in" end receives Live and Neutral connections. The other end of the tube should not be wired.
8. خوندي اړیکې: Use wire nuts to secure all connections and electrical tape to insulate any exposed wiring.
9. تړل شوی فکسچر: Reassemble the fixture, ensuring all wiring is neatly tucked away and no wires are pinched.
10. Install LED Tubes: Insert the Sunco T8 LED tubes into the lamp holders. Ensure the end marked for power input aligns with the rewired end of the fixture.
11. د بریښنا بیرته راګرځول: په سرکټ بریکر کې بریښنا بیرته فعاله کړئ.

Image 5.1: Ballast Bypass Wiring Diagram. This diagram illustrates how to remove the existing ballast and rewire the fixture for direct power to the LED tubes, showing Live (L) and Neutral (N) connections.

5.3. Tombstone Compatibility (Shunted vs. Non-Shunted)

For Single-Ended Power (SEP) Type B LED tubes, non-shunted tombstones are required. Shunted tombstones, commonly found in fixtures with instant-start ballasts, connect the two pins on one end of the lamp holder, which is incompatible with SEP LED tubes.

• Shunted Tombstone: Both pin contacts are electrically connected internally. Not suitable for Single-Ended Power LED tubes.
• Non-Shunted Tombstone: Each pin contact is isolated. Required for Single-Ended Power LED tubes, allowing separate Live and Neutral connections to the pins on the power-in end.

Image 5.2: Shunted vs. Non-Shunted Tombstones. This diagram visually explains the difference between shunted (not compatible with SEP) and non-shunted (compatible with SEP) tombstones, showing internal wiring paths.

If your existing fixture has shunted tombstones, they must be replaced with non-shunted tombstones for proper and safe operation of these LED tubes.

5.4. د نصبولو ویډیو

6. عملیاتي لارښوونې

Once properly installed, operating your Sunco T8 LED Tube Light Bulbs is straightforward:

• پاور آن/بند: Use the existing wall switch or fixture switch to turn the lights on or off.
• په فوري توګه: These LED tubes provide instant illumination with no warm-up time or flickering.
• غیر منحل کیدونکی: These specific LED tubes are non-dimmable. Do not connect them to dimmer switches.

Image 6.1: Flicker-Free Lighting. This image demonstrates the stable, flicker-free light output of Sunco LED tubes compared to traditional flickering lights.

7. ساتنه

Sunco T8 LED tubes are designed for long life and minimal maintenance. Follow these guidelines to ensure optimal performance:

• پاکول: Ensure power is off before cleaning. Use a soft, dry cloth to wipe the tubes. Do not use abrasive cleaners or solvents.
• معاینه: Periodically inspect the tubes and wiring for any signs of damage or loose connections. Address any issues promptly.
• بدلول: With an average lifespan of 50,000 hours, these tubes require infrequent replacement. When replacement is necessary, ensure power is off and follow the installation steps in Section 5.

8. ستونزه حل کول

If you encounter issues with your Sunco T8 LED tubes, refer to the following troubleshooting guide:

که چیرې د ستونزو حل کولو ګامونه ستونزه حل نه کړي، مهرباني وکړئ د سنکو لایټینګ پیرودونکو ملاتړ سره اړیکه ونیسئ.

9. تضمین او ملاتړ

د سنکو رڼا چمتو کوي a 5 کلن تضمین on these T8 LED Tube Light Bulbs, covering defects in materials and workmanship under normal use. This warranty is valid from the date of purchase.

For warranty claims, technical assistance, or any questions regarding your product, please contact Sunco Lighting customer support. Have your proof of purchase and model number ready.

• Webسایټ: www.suncolighting.com
• د اړیکو معلومات: Refer to the Sunco Lighting website for the most current contact details (phone, email, support portal).