Turck WKB 3T-4

د TURCK WKB 3T-4 کیبل اسمبلۍ کارن لارښود

Model: WKB 3T-4

Brand: Turck

1. پیژندنه

This manual provides essential information for the safe and effective use of the TURCK WKB 3T-4 Cable Assembly. This product is a high-quality industrial cable designed for reliable electrical connections in various applications. Please read this manual thoroughly before installation and operation.

TURCK WKB 3T-4 Cable Assembly with right-angle female connector

Figure 1: TURCK WKB 3T-4 Cable Assembly featuring a right-angle 1/2-20UNF female connector. The cable is yellow and the connector housing is metallic.

2. د خوندیتوب معلومات

تل د لاندې خوندیتوب احتیاطي تدابیرو ته پام وکړئ ترڅو محصول او وصل شوي تجهیزاتو ته زیان یا زیان ونه رسیږي:

  • د بریښنا قطع کول: Ensure all power to the system is disconnected before installing, removing, or performing any maintenance on the cable assembly.
  • سمه درملنه: Do not bend, twist, or pull the cable excessively. Avoid sharp edges or abrasive surfaces that could damage the cable jacket.
  • د چاپیریال شرایط: Use the cable within its specified voltage, current, and temperature ratings. While rated for indoor/outdoor use, protect connections from direct water ingress unless specifically designed for submersible applications.
  • وړ پرسونل: Installation and maintenance should only be performed by qualified personnel familiar with electrical systems and safety procedures.
  • د کارولو دمخه معاینه وکړئ: Before each use, visually inspect the cable and connector for any signs of damage, wear, or corrosion. Do not use if damage is observed.

3. محصول ختم شوview او اجزا

The TURCK WKB 3T-4 Cable Assembly is designed for robust industrial connectivity. Key features include:

  • د نښلونکي ډول: Right Angle 1/2-20UNF Female Connector.
  • د تار ترتیب: 3-wire cable.
  • د کیبل اوږدوالی: 4 meters (4M).
  • بریښنایی درجه بندي: 4 Amperes (4A), 250 Volts (250V).
  • Cable Jacket: AWM PVC (Appliance Wiring Material, Polyvinyl Chloride) for durability and flexibility.
  • رنګ: Black cable jacket.
  • کارول: د کور دننه او بهر غوښتنلیکونو لپاره مناسب.

4. ترتیب او نصب کول

Follow these steps for proper installation of the cable assembly:

  1. چمتووالی: Ensure the mating male connector on your device or system is clean and free of debris. Verify that the system is powered off and de-energized.
  2. سمون: Carefully align the right-angle female connector of the WKB 3T-4 cable assembly with the corresponding male connector.
  3. پیوستون: Gently push the connector together until it seats firmly. The right-angle design allows for connections in confined spaces.
  4. خوندي پیوستون: Rotate the threaded coupling nut on the female connector clockwise until it is hand-tight. Do not overtighten, but ensure a secure connection to prevent accidental disconnection or ingress of contaminants.
  5. د کیبل لاره: Route the cable in a manner that avoids sharp bends, kinks, or areas where it could be pinched, cut, or exposed to excessive heat or abrasion. Use cable ties or clamps if necessary to secure the cable path.
  6. تایید: After installation, visually inspect the connection to ensure it is fully seated and secured.

5. عملیاتي لارښوونې

The TURCK WKB 3T-4 Cable Assembly functions as a passive electrical conduit, transmitting power and/or signals between connected devices. Once properly installed, its operation is dependent on the connected equipment.

  • Ensure the cable is not subjected to stresses beyond its design limits (e.g., excessive pulling force, sharp impacts).
  • Verify that the connected devices are operating within the cable's specified voltage and current ratings (4A, 250V).
  • The right-angle design is particularly useful for applications where space is limited or where the cable needs to run parallel to a surface immediately after the connection point.

6. ساتنه

Regular maintenance helps ensure the longevity and reliable performance of your cable assembly:

  • پاکول: Periodically clean the exterior of the cable and connector with a soft, dry cloth. For stubborn dirt, a slightly damp cloth with mild detergent can be used, ensuring the connector pins are dry before re-connecting.
  • معاینه: Regularly inspect the cable jacket for cracks, cuts, abrasions, or discoloration. Check the connector for bent pins, corrosion, or loose components.
  • د اتصال بشپړتیا: Periodically check the tightness of the connector's coupling nut to ensure it remains secure.
  • ذخیره کول: When not in use, store the cable in a clean, dry environment, away from extreme temperatures and direct sunlight. Avoid coiling the cable too tightly.

7. ستونزه حل کول

This section addresses common issues you might encounter with the cable assembly.

ستونزهاحتمالي لاملد حل لاره
No power/signal transmissionتړلی اړیکه
خراب شوی کیبل/نښلونکی
Incorrect wiring (external to cable)
Ensure connector is fully seated and coupling nut is tight.
Inspect cable for visible damage; replace if damaged.
Verify wiring of connected devices.
موقتي اړیکهتړلی اړیکه
Corrosion on pins
د کیبل داخلي زیان
Tighten coupling nut.
Clean connector pins carefully (with power off).
Replace cable if internal damage is suspected.
Connector difficult to mateغلط تنظیم
کثافات په نښلونکي کې
Bent pins
Ensure correct orientation and alignment.
Clean connector thoroughly.
Inspect for bent pins; if found, cable may need replacement.

8. مشخصات

Detailed technical specifications for the TURCK WKB 3T-4 Cable Assembly:

صفتارزښت
د ماډل شمیرهWKB 3T-4
برانډترک
د نښلونکي ډولRight Angle 1/2-20UNF Female
د بریښنا تنظیم3 تار
د کیبل اوږدوالی4 Meters (4M)
اوسنۍ درجه بندي4 Ampایرس (4A)
والیtage درجه بندي250 Volts (250V)
د کیبل جاکټ موادAWM PVC
رنګتور
د کور دننه / بهر کارولدننه، بهر
شکلګرد
د لومړي شتون نیټهد اپریل 30، 2020

9. تضمین او ملاتړ

TURCK products are manufactured to high standards and are typically covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the official TURCK webسایټ ته مراجعه وکړئ یا خپل مجاز توزیع کونکي سره اړیکه ونیسئ.

For technical support, product inquiries, or assistance with troubleshooting beyond the scope of this manual, please contact TURCK customer service or your local TURCK representative. Contact information can usually be found on the official TURCK webسایټ (www.turck.com).

اړوند اسناد - WKB 3T-4

مخکېview TURCK TBEC-LL-4RFID-8DXP RFID Interface: Instructions for Use
This document provides comprehensive instructions for the TURCK TBEC-LL-4RFID-8DXP RFID Interface, detailing its installation, connection, operation, and safety guidelines for industrial automation applications.
مخکېview د TURCK FEN20-4IOL IO-Link ماسټر ماډل: د کارولو لارښوونې
د TURCK FEN20-4IOL IO-Link ماسټر ماډل لپاره جامع لارښوونې، چې د صنعتي اتوماتیک غوښتنلیکونو لپاره د هغې ځانګړتیاوې، د سیسټم جوړښت، نصب، کمیشن کول، او عملیات پوښي.
مخکېview TURCK TBEN-S2-4IOL User Manual
User manual for the TURCK TBEN-S2-4IOL, a 4-channel IO-Link Master module for industrial automation. Details installation, configuration, operation, and troubleshooting for industrial environments.
مخکېview TURCK NIC...-EM30-IOL-... Inductive Couplers Quick Start Guide
Quick start guide for TURCK NIC...-EM30-IOL-... inductive couplers, detailing intended use, safety precautions, product features, installation, connection, operation, LED indicators, troubleshooting, and technical specifications. Includes information on IO-Link and SIO modes.
مخکېview د تورک ښاغلی... د رادار سکینر چټک پیل لارښود
Quick start guide for the Turck MR... Radar Scanner, detailing its features for non-contact object detection, distance, angle, and velocity measurement. Includes installation, operation, technical specifications, safety guidelines, and compliance information for industrial automation applications. Supports IO-Link and SAE J1939 protocols.
مخکېview TBPN-L5-4FDI-4FDX د خوندیتوب بلاک I/O ماډل: د کارولو لارښوونې
دا سند د TURCK TBPN-L5-4FDI-4FDX خوندیتوب بلاک I/O ماډل لپاره د کارولو لارښوونې چمتو کوي. دا د صنعتي اتوماتیک غوښتنلیکونو لپاره د محصول توضیحات، د خوندیتوب معلومات، نصب، ترتیب، عملیات، او تخنیکي معلومات پوښي.