د ورکپرو ګلابي بې تار ډرل ډرایور سیټ کارونکي لارښود

1. پیژندنه او وروستهview

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your WORKPRO Pink Cordless Drill Driver Set. Please read this manual thoroughly before initial use and retain it for future reference.

Figure 1: The WORKPRO Pink Cordless Drill Driver Set, including the drill, battery, charger, and various bits.

The WORKPRO Pink Cordless Drill Driver is a versatile 12V electric tool designed for various drilling and driving tasks. Its lightweight and ergonomic design makes it suitable for extended use and maneuverability in tight spaces. Key features include a 3/8" keyless chuck, two-speed settings, 18+1 torque adjustment, and an integrated LED light for improved visibility.

2. شاملې برخې

ستاسو د WORKPRO ګلابي بې تار ډرل ډرایور سیټ لاندې توکي لري:

• 1 x 12V بې سیمه ډریور چلوونکی
• 1 x بار وړونکې کڅوړه
• 1 x 1500 mAh لیتیم آئن بیټرۍ
• 1 x 0.4A چارجر
• 10 x 1" CR-V Bits (PH1, PH2, PH3, 1/8, 5/32, 3/16, 1/4, T10, T15, T20)
• 6 x Twist Drill Bits (1/8'', 5/32'', 3/16", 11/64", 7/32', 1/4'')
• 1 x بټ هولډر

Figure 2: All items included in the WORKPRO Pink Cordless Drill Driver Set.

3. ترتیب کول

3.1 د بیټرۍ چارج کول

Before first use, fully charge the 1500 mAh Lithium-ion battery. To charge, remove the battery from the drill by pressing the release buttons on the sides of the battery pack and sliding it out. Connect the 0.4A charger to the battery's charging port and plug the charger into a standard electrical outlet. The charging indicator light on the charger will change color (e.g., red to green) to indicate a full charge. Charging typically takes several hours.

Figure 3: Detached battery and charger for the drill driver.

3.2 Attaching/Changing Bits (Keyless Chuck)

The drill features a 3/8" keyless chuck for easy bit changes. To insert a bit:

1. Rotate the chuck counter-clockwise until the jaws are wide enough to accept the desired drill bit or screwdriver bit.
2. بټ په بشپړه توګه په چک کې دننه کړئ.
3. Rotate the chuck clockwise until the jaws firmly grip the bit. Ensure the bit is centered and securely tightened to prevent slippage during operation.

Figure 4: Detail of the keyless chuck mechanism.

4. عملیاتي لارښوونې

4.1 Powering On/Off and Forward/Reverse Control

The drill is activated by pressing the trigger switch. The forward/reverse switch, located above the trigger, allows you to change the rotation direction. Push the switch to the left for forward rotation (for driving screws) and to the right for reverse rotation (for removing screws). A center position locks the trigger for safety and prevents accidental activation.

د سرعت تنظیمات

The drill offers two variable speed settings:

• ټیټ سرعت (۰-۳۶۰ RPM): Ideal for driving screws and applications requiring higher torque and more control.
• لوړ سرعت (۰-۱۳۰۰ RPM): Suitable for drilling and tasks requiring faster rotation.

Adjust the speed using the speed selector switch located on top of the drill.

Figure 5: Two-speed transmission settings for drilling and screwdriving.

4.3 Torque Adjustment (18+1 Clutch)

The 18+1 torque clutch allows you to select the appropriate torque setting for different materials and screw sizes, preventing overtightening or stripping screws. The "1" setting is for minimal torque, while "18" provides maximum torque. The "+1" setting is for drilling mode, bypassing the clutch for continuous power.

Figure 6: Torque adjustment ring with 18 settings plus a drilling mode.

۷.۳ جوړ شوی LED څراغ

A trigger-activated LED light illuminates the work area, providing enhanced visibility in dimly lit environments and reducing shadows.

Figure 7: The built-in LED light provides illumination for dark working environments.

5. ساتنه

5.1 د بیټرۍ پاملرنه

To prolong the life of your Lithium-ion battery, it is recommended to recharge it every 3-6 months if the drill is not used frequently. Avoid completely draining the battery before recharging, as this can reduce its overall lifespan.

5.2 عمومي پاکول

د ډرل بهرنۍ برخه په منظم ډول د نرم، ډamp cloth. Do not use harsh chemicals or abrasive cleaners. Keep the ventilation openings clear of dust and debris to ensure proper motor cooling.

6. ستونزه حل کول

If you encounter issues with your WORKPRO Pink Cordless Drill Driver, refer to the following common troubleshooting steps:

• ډرل نه چالانېږي: ډاډ ترلاسه کړئ چې بیټرۍ په بشپړه توګه چارج شوې او په سمه توګه داخل شوې ده. وګورئ چې مخکینۍ/شاته سویچ په تړل شوي (مرکزي) موقعیت کې نه دی.
• بیټرۍ چارج نه کوي: Verify the charger is correctly plugged into both the battery and a working electrical outlet. Check the charger's indicator light. If the issue persists, the battery or charger may need replacement.
• په چک کې د ټوټې ټوټې کېدل: Ensure the chuck is tightened securely around the bit. If the bit continues to slip, the chuck jaws may be worn or damaged.
• کم شوی ځواک/فعالیت: The battery may be low on charge. Ensure the correct speed and torque settings are selected for the task.

For more complex issues, consult the full User Manual (PDF) or contact WORKPRO customer support.

7. مشخصات

8. Additional Resources and Support

For detailed instructions, safety guidelines, and further assistance, please refer to the official PDF user manuals:

• د کارونکي لارښود (PDF)
• د کارن لارښود (PDF)

For customer support or warranty inquiries, please visit the official WORKPRO webسایټ ته مراجعه وکړئ یا مستقیم د دوی د پیرودونکو خدماتو څانګې سره اړیکه ونیسئ.