Chicco KeyFit 35 Infant Car Seat Instruction Manual

1. پیژندنه او وروستهview

Thank you for choosing the Chicco KeyFit 35 Infant Car Seat. This manual provides essential information for the correct installation, operation, and maintenance of your car seat. The KeyFit 35 is designed to safely and comfortably accommodate your baby from 4 to 35 pounds and up to 32 inches tall, offering extended rear-facing use.

It features an Easy-Extend Headrest System, an integrated anti-rebound bar for stability, and intuitive installation features for a secure fit every time. The car seat is compatible with Chicco strollers for convenient travel system use.

2. د خوندیتوب معلومات

WARNING: Always read and follow all instructions and warnings in this manual and your vehicle's owner's manual for proper use and installation. Failure to do so can result in serious injury or death.

• Rear-Facing Only: This car seat is designed for rear-facing use only.
• د وزن او قد حدود: Use for infants weighing 4-35 pounds and up to 32 inches tall. Discontinue use when your child exceeds these limits.
• د اغیزو ساتنه: The carrier shell is lined with EPS energy-absorbing foam for enhanced impact protection.
• د بیرته راګرځیدو ضد بار: The integrated anti-rebound bar provides increased stability and additional legroom for your growing child.
• د ګنډلو سیسټم: Always secure your child using the 5-point harness system. Ensure straps are snug and properly positioned.

3. اجزاء

• Infant Car Seat Carrier
• Stay-in-Car Base
• Removable Infant Head and Body Support
• UPF 50+ Full-Coverage Canopy
• 5-Point Harness System
• SuperCinch Force-Multiplying LATCH Tightener
• ReclineSure Spring-Loaded Leveling Foot
• RideRight Bubble Level-Indicators
• LockSure Steel-Reinforced Belt System

۱. تنظیم او نصب کول

The Chicco KeyFit 35 is engineered for easy and secure installation using either the LATCH system or your vehicle's seat belt.

4.1. Base Installation (LATCH System)

1. Place the stay-in-car base on your vehicle's seat in the rear-facing position.
2. Attach the premium LATCH connectors to your vehicle's lower anchors.
3. Use the SuperCinch force-multiplying tightener to achieve a secure fit.
4. Verify the proper recline angle using the ReclineSure spring-loaded leveling foot and RideRight bubble level-indicators. The bubble should be within the green zone.

4.2. Base Installation (Vehicle Belt)

1. Place the stay-in-car base on your vehicle's seat in the rear-facing position.
2. Route the vehicle's lap and shoulder belt through the designated belt path on the base.
3. Engage the LockSure steel-reinforced belt system to secure the belt tightly.
4. Verify the proper recline angle using the ReclineSure spring-loaded leveling foot and RideRight bubble level-indicators.

4.3. Carrier-Only Installation

The KeyFit 35 carrier can also be installed without the base, using the vehicle's seat belt. Refer to the detailed instructions in your full product manual for this method.

4.4. Attaching the Car Seat Carrier to the Base

1. Align the car seat carrier with the installed base.
2. کیریر په بیس کې ښکته کړئ تر هغه چې په خوندي ډول ځای ته راشي.
3. Always check that the carrier is firmly attached to the base by pulling up on the handle.

۴.۳. د سفر سیسټم مطابقت

The KeyFit 35 Infant Car Seat clicks securely into compatible Chicco strollers, creating a convenient car seat and stroller combo. A one-hand release makes it easy to remove the carrier from the stroller.

5. عملیاتي لارښوونې

۱. د خپل ماشوم ساتنه

1. خپل ماشوم د موټر په څوکۍ کې کېږدئ.
2. Fasten the 5-point harness. Ensure the chest clip is at armpit level.
3. Pull the harness tightening strap to ensure a snug fit. You should not be able to pinch any excess webد خپل ماشوم په اوږه ودرېږئ.

5.2. Adjusting the Headrest and Harness

The Easy-Extend Headrest System adjusts with the no-rethread harness to accommodate your child's growth. Simply squeeze the adjustment lever at the top of the headrest and slide it up or down to the appropriate height.

5.3. Using the Infant Head and Body Support

For newborns weighing 4-11 pounds, use the removable ergonomic head and body support positioner to ensure proper fit and comfort.

5.4. د کینوپی عملیات

The double-knit, full-coverage canopy offers UPF 50+ sun protection. It can be extended or retracted as needed to shield your child from the sun.

6. ساتنه او پاکول

The car seat features removable fabrics for easy cleaning. Refer to the care labels on the fabric and the full instruction manual for specific washing instructions.

• د جامو ساتنه: Most fabric components are machine washable on a delicate cycle with mild detergent. Air dry.
• د ګنډلو سیسټم: د زنګون تسمې د اعلان سره پاک کړئamp cloth. Do not machine wash or submerge harness straps in water, as this may weaken them.
• پلاستیکي او فلزي برخې: په نرمۍ سره پاک کړئ، دamp ټوکر او نرم صابون.

7. ستونزه حل کول

If you encounter any issues with your Chicco KeyFit 35 Infant Car Seat, please refer to the following common solutions:

• خلاص نصب: Ensure the LATCH connectors or vehicle belt are tightened fully. Re-check the bubble level-indicators.
• د هارنس تنظیم کول: If the harness is too loose or too tight, adjust the Easy-Extend Headrest System and pull the tightening strap as described in Section 5.2.
• Carrier Not Latching: Ensure no obstructions are preventing the carrier from clicking securely into the base. Re-align and try again.

For further assistance, please contact Chicco customer service.

8. مشخصات

9. تضمین او ملاتړ

The Chicco KeyFit 35 Infant Car Seat comes with a د 1 کلن محدود تضمین from the manufacturer, Artsana USA, Inc.

For warranty claims, product support, or any questions not covered in this manual, please contact Chicco customer service directly. Contact information can typically be found on the Chicco webپه سایټ یا د محصول په بسته بندۍ کې.

۳.۳. د محصول رسمي ویډیو

Watch the official Chicco brand video for an overview of their commitment to baby products.