د ایلیټیک STC-1000 TH د تودوخې او رطوبت کنټرولر کارونکي لارښود

1. پیژندنه او وروستهview

The Elitech STC-1000 TH is a versatile temperature and humidity controller designed for precise environmental management. This non-WiFi model features a 2-in-1 sensor for both temperature and humidity, offering a wide control range suitable for various applications such as reptile habitats, home brewing, and freezers. Its pre-wired design ensures ease of use with a simple plug-and-play setup, eliminating complex wiring. The device includes dual relay outputs, allowing simultaneous control of temperature and humidity devices, and offers multi-functional settings including alarms, start delay, and calibration options. Built with safety in mind, it complies with CE, FCC, WEEE standards and features a fireproof ABS case.

Figure 1.1: Elitech STC-1000 TH Controller with its sensor and dual power outlets.

2. کلیدي ځانګړتیاوې

• د کنټرول پراخه لړۍ: Temperature & humidity 2 in 1 Sensor; Temperature control range 23℉～158℉, humidity control range 5%RH～99%RH. It starts cooling or heating; humidifying or dehumidifying according to configured parameters, which helps to keep a desired temperature/humidity anytime.
• No Wiring: Its large LCD screen, simple 3-button, and pre-wired design making it easier for use with plug and play.
• دوه ګونی ریل تولید: Be able to connect two types of equipments at the same time, work1 for temperature controlling; and work 2 for humidity controlling.
• Multi-functional Setting: Its functions include high or low alarms, start delay, temperature or humidity calibration, Temperature unit ℃/℉ and continuous working time for humidity.
• خوندي او د باور وړ: Comply with CE, FCC, WEEE standard and adopt fireproof ABS case for safety when in use. Flame Retardant UL94 V-0.

Figure 2.1: Visual representation of key features including large screen, buzzer alarm, compressor delay protection, power off memory, and real-time monitoring.

3. ترتیب کول

The Elitech STC-1000 TH is designed for straightforward setup, requiring no complex wiring. Simply plug in your heating/cooling and humidifying/dehumidifying devices into the designated outlets.

1. کنټرولر خلاص کړئ: Carefully remove the controller, sensor, and power cables from the packaging.
2. سینسر وصل کړئ: Plug the combined temperature and humidity sensor into the designated port on the controller.
3. سینسر ځای په ځای کړئ: Place the sensor in the environment where you wish to monitor and control temperature and humidity. Ensure it is not directly exposed to heat sources or moisture outlets for accurate readings.
4. د وسیلو نښلول: Plug your temperature control device (e.g., heat lamp, fan) into the 'WORK1' outlet and your humidity control device (e.g., humidifier, dehumidifier) into the 'WORK2' outlet.
5. پاور آن: Plug the controller's main power cord into a standard 110V electrical outlet. The LCD screen will illuminate, displaying current temperature and humidity readings.
6. ایښودل (اختیاري): The controller features a convenient hanging hole at the top for easy mounting on a wall or suitable surface using a nail or screw.

Figure 3.1: The controller's plug-and-play design simplifies installation.

Figure 3.2: The integrated hanging tab allows for easy and secure placement.

Figure 3.3: Product dimensions and cable lengths for planning your setup.

4. عملیاتي لارښوونې

The STC-1000 TH features an intuitive interface for setting your desired temperature and humidity parameters. The large LCD screen provides clear readings and easy navigation.

Figure 4.1: The large LCD screen ensures easy readability of all parameters.

۴.۲ د تودوخې او رطوبت تنظیمول

1. د تنظیم کولو حالت داخل کړئ: فشار ورکړئ او ونیسئ SET button for 3 seconds until the setting icon (a small cloud with a wrench) appears on the display.

Figure 4.2: Hold the SET button for 3 seconds to enter setting mode.
2. Set Temperature (TS): د کارولو Up or ښکته arrows to navigate to the 'TS' parameter (Temperature Setpoint). Press SET once to select it. Use the arrows to adjust the desired temperature. Press SET again to confirm and move to the next parameter or exit.
3. Set Humidity (HS/HD): Similarly, navigate to 'HS' (Humidity Setpoint) for humidifying or 'HD' (Humidity Differential) for dehumidifying. Press SET once, adjust the value with the arrows, and press SET بیا د تایید لپاره.


Figure 4.3: Steps to set the humidity setpoint (HS).



Figure 4.4: Steps to set the humidity differential (HD).

4. د ترتیب حالت څخه وتل: The controller will automatically exit setting mode after a period of inactivity, or you can press and hold the SET button for 3 seconds to exit manually. The setting icon will disappear.

4.2 اتوماتیک عملیات

Once parameters are set, the controller will automatically activate or deactivate the connected devices (via WORK1 and WORK2 outlets) to maintain the desired temperature and humidity levels. For example, if the temperature drops below your setpoint, the heating device connected to WORK1 will turn on until the setpoint is reached. The same logic applies to cooling, humidifying, and dehumidifying based on your configured settings.

Figure 4.5: The STC-1000 TH helps maintain optimal conditions for various projects.

5. ساتنه

To ensure the longevity and accurate performance of your Elitech STC-1000 TH controller, follow these general maintenance guidelines:

• منظم پاکول: Wipe the controller and sensor with a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents.
• د سینسر پاملرنه: Keep the sensor clean and free from obstructions. Do not submerge the sensor in water or expose it to extreme physical impact.
• د کیبل معاینه: Periodically check all cables for any signs of wear, cuts, or damage. Replace damaged cables immediately to prevent electrical hazards.
• د چاپیریال شرایط: Ensure the controller is used within its specified operating temperature and humidity ranges to prevent damage. Avoid placing it in direct sunlight or near strong electromagnetic fields.

6. ستونزه حل کول

If you encounter issues with your Elitech STC-1000 TH controller, consider the following troubleshooting steps:

• هیڅ ښودنه/بریښنا نشته:
  • Check if the power cord is securely plugged into a live electrical outlet.
  • ډاډ ترلاسه کړئ چې د بریښنا سرچینه فعاله ده.
• ناسم لوستل:
  • ډاډ ترلاسه کړئ چې سینسر پاک دی او خنډ نه دی.
  • Verify the sensor is correctly positioned and not influenced by direct heat/cold sources or excessive moisture.
  • Perform a temperature or humidity calibration if you have a trusted reference thermometer/hygrometer. Refer to the detailed user manual for calibration procedures.
• Devices Not Activating/Deactivating:
  • Check if the devices are correctly plugged into the 'WORK1' (temperature) and 'WORK2' (humidity) outlets.
  • Confirm that the setpoints and differentials are configured correctly for your desired operation (e.g., heating vs. cooling, humidifying vs. dehumidifying).
  • Ensure the current temperature/humidity is outside the set range, triggering the controller.
• د الارم غږونه:
  • The alarm indicates that the temperature or humidity has exceeded or fallen below the set high/low alarm limits.
  • Adjust your setpoints or alarm limits as needed.

If these steps do not resolve the issue, please refer to the detailed user manual or contact Elitech customer support.

7. مشخصات

8. تضمین او ملاتړ

Elitech is committed to providing high-quality products and excellent customer service. For any technical assistance or warranty inquiries, please utilize the following resources:

• تخنیکي ملاتړ: Elitech offers 24/7 US Technician Support via Email and Phone. Contact information can be found on the official Elitech webسایټ یا په بشپړ کارونکي لارښود کې.
• د کارونکي لارښود: For detailed instructions, advanced settings, and comprehensive troubleshooting, please download the official user manual in PDF format: د کارونکي لارښود (PDF) ډاونلوډ کړئ

9. About Elitech

Elitech is an international enterprise originating from Silicon Valley in the United States. With subsidiaries in the United Kingdom, Brazil, Italy, Poland, and Russia, and a 100-acre production site in China, Elitech has a global presence. With over 27 years of experience in HVAC product manufacturing, Elitech produces a comprehensive line of HVAC tools and refrigeration solutions, leading the new generation of smart HVAC tools. Our mission is to combine intelligence and innovation with the refrigeration industry to simplify work processes.

Figure 9.1: Elitech Company Logo.