1. محصول ختم شوview
This manual provides detailed instructions for the setup, operation, and maintenance of your ELECROW 7 Inch Touchscreen Monitor, Model RC070S. Please read thoroughly before use.
موډل: RC070S
برانډ: الیکرو
The ELECROW 7-inch IPS touchscreen offers a 1024x600 resolution, adjustable via software to 1920x1080. It features vivid colors, a 178° viewing angle, and a durable, scratch-resistant tempered glass touch panel. Designed for plug-and-play functionality, it connects via HDMI for video and USB for power and touch control, requiring no additional drivers. It is compatible with various devices including Raspberry Pi 5/4/3B+/3B/2B+, Banana Pi, Jetson Nano, PCs, laptops, and gaming consoles. The monitor supports 5-point capacitive touch on Windows 11/10/8/7 and single-touch on Raspberry Pi and Jetson Nano. Integrated dual speakers and a 3.5mm headphone jack provide immersive audio, with adjustable volume and backlight settings.
2. د بسته محتويات
- 1 x 7 Inch IPS Monitor
- 1 x USB to Micro USB Connector
- 1 x HD to Micro HD Connector
- 1 x USB ته مایکرو USB کیبل
- 1 x HD to HD Cable
- 4 x M2.5 پیچ
- 2 x M3 پیچ
- 2 x سپیکرونه
- 2 x پرو سټینډ
- 4 x Small Copper Pillars
3. تخنیکي مشخصات
| فیچر | مشخصات |
|---|---|
| د سکرین اندازه ښکاره کړئ | ۷۸۷ انچه |
| د پینل ډول | IPS |
| د ټچ ډول | ۱۰-پوائنټ کیپسیټیو ټچ |
| قرارداد | 1024 x 600 Pixels (Software adjustable to 1920x1080) |
| روښانتیا | 260 cd/m² |
| Viewزاویه | 178° (H) / 178° (V) |
| د تازه کولو نرخ | 60Hz |
| د HDMI بندرونه | 1 |
| USB بندرونه | 1 (for power and touch) |
| د آډیو تولید | 3.5mm Audio Jack, Built-in Dual Speakers |
| ننوتۍ جلدtage | 5 ولټه |
| ټول ځواک (اعظمي) | 2.55W |
| د عملیاتي حرارت درجه | -20°C ~ 60°C |
| د ذخیرې د حرارت درجه | -30°C ~ 70°C |
| د محصول ابعاد | 1 x 6.5 x 4 انچه |
| د توکي وزن | 8.3 اونس |
| ملاتړ شوی OS | Windows 11/10/8/7, Raspbian, Ubuntu, Kali, Retropie, Jetson Nano |
4. ترتیب او نصب کول
۴.۱ عمومي غونډه
To set up the monitor, first attach the included stands to the bottom of the display using the provided screws. Ensure the protective film is removed from the stands before assembly.
4.2 Raspberry Pi Connection
For Raspberry Pi connections, use the provided HDMI cable for video and the USB cable for power and touch functionality. For Raspberry Pi 4 and 5, use the included Micro-HDMI to HDMI adapter. No drivers are required for basic functionality.
مهم: For Raspberry Pi 4, if using a system image after 2021-10-30 (e.g., Bullseye), modify dtoverlay = vc4-kms-v3d ته dtoverlay = vc4-fkms-v3d په config.txt file. For Buster, comment out dtoverlay = vc4-fkms-V3D by adding a '#' at the beginning of the line.
Video 1: Step-by-step guide on how to install the 7-inch screen with a Raspberry Pi, demonstrating cable connections and initial setup.
Video 2: Instructions on how to install the Raspberry Pi board with the screen, detailing the physical mounting and connections.
4.3 د کمپیوټر اتصال
Connect the monitor to your PC or laptop using the HDMI cable for video and the USB cable for power and touch. The monitor is driver-free for Windows 11/10/8/7. Adjust display settings on your PC for optimal resolution.
5. د مانیټر چلول
۵.۳ د لمس فعالیت
The monitor features a 5-point capacitive touchscreen for multi-touch gestures on Windows and single-touch on Raspberry Pi and Jetson Nano. Ensure the USB cable is connected to enable touch input.
۳.۱ د پردې پرده ښودنه (OSD) مینو
The monitor includes tactile buttons on the side for navigating the OSD menu. These buttons allow adjustment of various display settings:
- انځور: Adjust backlight, brightness, contrast, and sharpness.
- رنګ: Modify panel uniformity, gamma, temperature, and color effects.
- پرمختگ: Set aspect ratio.
- آډیو: حجم کنټرول کړئ او خاموش کړئ.
5.3 آډیو ځانګړتیاوې
The monitor is equipped with built-in dual speakers and a 3.5mm headphone jack for audio output. Digital audio output is also supported via HDMI.
6. ستونزه حل کول
- Monitor not powering on: Ensure the power cable (USB-A to C) is properly plugged into both the Raspberry Pi/PC and the monitor.
- Image is reversed: The monitor does not support image flip.
- No touch functionality: Verify the USB-A to C cable is securely connected between the host device and the monitor.
- No signal on display: Ensure the HDMI cable is properly connected between the host device and the monitor. If using a mini HDMI port, ensure the correct adapter is used.
- Speakers at high volume cause issues: When speakers are at 80% or more volume, connect the power port (not touch port) to provide full power.
7. مهم یادونه
- The Raspberry Pi cannot be powered by powering the screen.
- Always connect the power interface when powering the screen. Supplying power through the touch interface may lead to insensitive or unusable touch functionality.
8. تضمین او ملاتړ
ELECROW products offer a one-year warranty. For quality-related issues, you may return any undamaged product within 12 months for a refund or replacement. Shipping costs and charges are not included.
For support or inquiries, please contact ELECROW customer service:
- Webسایټ: www.eyoyousa.com
- بریښنالیک: support@eyoyomonitor.com
- تلیفون: 909-317-8588 (9:00 AM–5:00 PM; Monday–Friday)
- USA Office Address: 10700 Jersey Blvd Ste 640, Rancho Cucamonga, CA 91730, USA
