سټار 025191 د لوړ فعالیت حوض پمپ کارونکي لارښود

پیژندنه

انځور: Star 025191 High Performance Pool Pump. This image displays the complete pool pump unit, highlighting its compact design and key components like the motor, pump housing, and transparent strainer lid.

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Star 025191 High Performance Pool Pump. This pump is designed for use with in-ground or above-ground swimming pools up to 53,000 gallons, ensuring water clarity and hygiene. Please read this manual thoroughly before installation and operation.

The Star 025191 pump features a 1.5 HP single-speed motor, factory-wired for 230 Volts, and is constructed from corrosion-resistant thermoplastic for durability. It delivers a high volume flow rate of up to 110 GPM at 20’ TDH for efficient water circulation to filtration systems.

د خوندیتوب مهمې لارښوونې

کله چې د دې بریښنایی تجهیزاتو نصب او کارول ، د خوندیتوب لومړني احتیاطونه باید تل تعقیب شي ، پشمول لاندې:

• ټول لارښوونې ولولئ او تعقیب کړئ.
• خطر: Risk of electrical shock. Connect only to a grounded receptacle protected by a ground-fault circuit interrupter (GFCI).
• خبرداری: د ټپي کیدو خطر کمولو لپاره ، ماشومانو ته اجازه مه ورکوئ چې دا محصول وکاروي.
• خبرداری: This pump is for permanent installation only. Do not use with storable pools.
• Ensure the electrical supply matches the pump's voltage requirements (115V or 230V). The pump is factory-wired for 230V.
• All wiring must be performed by a qualified electrician and comply with local codes and regulations.
• Always disconnect power to the pump before servicing or performing maintenance.
• که چیرې پمپ په کوم ډول زیانمن شوی وي نو مه یې چلوئ.
• Keep all connections dry and away from water.

د بسته محتويات

د نصبولو پیل کولو دمخه ډاډ ترلاسه کړئ چې ټولې برخې په بسته کې شتون لري.

انځور: Package Contents Diagram. This illustration details the main pump unit (A) and the included connection accessories: 2-inch slip union adapters (B), 1.5-inch slip union adapters (C), and couplings (D).

تنظیم او نصب کول

Proper installation is crucial for the pump's performance and longevity. Refer to the installation diagram and follow these steps carefully.

۱. د ځای انتخاب

• Install the pump as close to the pool as possible to minimize friction loss from long suction lines.
• Ensure the pump is installed on a firm, level base that can support its weight and prevent vibration.
• Provide adequate ventilation around the motor for cooling.
• Protect the pump from excessive moisture and direct sunlight.

2. د نلدوانۍ نښلول

The pump is designed to connect to either 1.5-inch or 2-inch pipe using the included slip union adapters and couplings.

1. Apply thread sealant to all threaded connections to ensure a watertight seal.
2. Connect the appropriate slip union adapters (1.5" or 2") to the pump's inlet and outlet ports.
3. Use the couplings to connect the pump to your existing pool plumbing. Ensure all connections are tight to prevent air leaks, especially on the suction side.

انځور: Installation Diagram and Performance Data. This image provides a visual guide for connecting the pump to an in-ground pool system and includes a table detailing the pump's flow rate (GPM) at various Total Dynamic Head (TDH) levels.

3. بریښنایی ارتباطات

The Star 025191 pump is factory-wired for 230 Volts. If your electrical supply is 115 Volts, consult a qualified electrician for proper rewiring. The pump includes a 3 ft pigtail cord with ring terminals for connection.

• Ensure the power supply is disconnected at the circuit breaker before making any electrical connections.
• Connect the pump's pigtail cord to a dedicated circuit protected by a Ground-Fault Circuit Interrupter (GFCI).
• All electrical connections must comply with national and local electrical codes.

عملیاتي لارښوونې

۱. د پمپ پریمینګ کول

Before starting the pump for the first time, or after the pump has been drained, it must be primed.

1. Ensure the pool water level is adequate.
2. د حوض د نلدوانۍ سیسټم کې ټول سکشن او بیرته ستنیدونکي والونه خلاص کړئ.
3. Remove the transparent strainer cover and fill the strainer basket housing with water until it overflows.
4. Replace the strainer cover, ensuring it is securely tightened to prevent air leaks.
5. Turn on the power to the pump. The pump should begin to draw water and expel air from the return lines.
6. If the pump does not prime within 5 minutes, turn it off, re-prime, and check for air leaks in the suction line.

2. نورمال عملیات

• Once primed, the pump will operate continuously, circulating water through your filtration system.
• Monitor the pressure gauge on your filter (if applicable) to ensure it is within the normal operating range. An unusually high pressure reading may indicate a dirty filter or blockage.
• Regularly check the transparent strainer cover to see if the basket needs cleaning.

ساتنه

Regular maintenance ensures optimal performance and extends the life of your pool pump.

1. Cleaning the Strainer Basket

The large strainer basket is designed to collect debris before it reaches the pump impeller. The transparent cover allows for easy visual inspection.

1. Turn off the pump and disconnect power at the circuit breaker.
2. Rotate the transparent strainer cover counter-clockwise to remove it.
3. د فلټر ټوکرۍ پورته کړئ او راټول شوي کثافات خالي کړئ.
4. ټوکرۍ په اوبو سره په ښه توګه ومینځئ.
5. Inspect the O-ring on the strainer cover for cracks or wear. Replace if necessary.
6. Place the clean basket back into the housing, ensuring it is seated correctly.
7. Replace the strainer cover, tightening it clockwise until snug. Do not overtighten.
8. Re-prime the pump as described in the "Operating Instructions" section.

۶.۳. د ژمي موسم

If you live in an area where temperatures drop below freezing, proper winterization is essential to prevent damage.

• پمپ بند کړئ او بریښنا پرې کړئ.
• Drain all water from the pump by removing the drain plugs (if applicable) or by disconnecting plumbing.
• Store the pump in a dry, protected area, or cover it securely if it must remain outdoors.

د ستونزو حل کول

This section addresses common issues you might encounter with your pool pump. For problems not listed here, contact customer support.

مشخصات

Detailed technical specifications for the Star 025191 High Performance Pool Pump.

انځور: Product Dimensions and Specifications. This image provides a detailed technical drawing with key dimensions of the pump and a table summarizing its electrical and performance characteristics.

تضمین

The Star 025191 High Performance Pool Pump is covered by a د 1 کلن محدود تضمین د پیرود نیټې څخه. دا تضمین د عادي استعمال او خدماتو لاندې د موادو او کاري وړتیا نیمګړتیاوې پوښي.

For warranty claims or to understand the full terms and conditions, please refer to the warranty card included with your product or contact Star Water Systems customer support.

Note: This product is not available for shipment to California.

د پیرودونکي ملاتړ

For technical assistance, replacement parts, or warranty inquiries, please contact Star Water Systems customer support.

• Webسایټ: www.starwatersystems.com (بېلګهample لینک، اصلي لینک ممکن توپیر ولري)
• تلیفون: د خپل محصول بسته بندۍ یا د جوړونکي ته مراجعه وکړئ webد اوسنیو اړیکو شمیرو لپاره سایټ.

When contacting support, please have your model number (025191) and date of purchase readily available.