1. پیژندنه
This manual provides comprehensive instructions for the installation, operation, and maintenance of the YANZEO SR692 UHF RFID Reader. The SR692 is an integrated UHF RFID reader designed for long-range identification applications, featuring a 9dBi antenna and various network output options. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
2. د خوندیتوب معلومات
- د بریښنا رسولو حجم ډاډمن کړئtage د وسیلې اړتیاوې پوره کوي.
- وسیله د سختې تودوخې، رطوبت، یا زنګ وهونکي چاپیریال سره مه مخ کوئ.
- Avoid direct exposure to the antenna during operation, as it emits radio frequency energy.
- د وسیلې د جلا کولو یا بدلولو هڅه مه کوئ. ټولې خدمتونه وړ پرسونل ته راجع کړئ.
- The device is rated IP67 for dust and water resistance, but avoid submerging it in water.
3. د بسته محتويات
ډاډ ترلاسه کړئ چې لاندې ټول لیست شوي توکي ستاسو په کڅوړه کې شتون لري:
- YANZEO SR692 UHF RFID Reader Unit
- د بریښنا اډاپټر
- د ماین پاکولو او هارډویر
- RS232/RS485 Cable
- RJ45 Network Cable (may vary)
Figure 3.1: YANZEO SR692 UHF RFID Reader with its accessories and indicated dimensions (26cm x 26cm x 3.2cm). The image shows the main reader unit, power adapter, mounting hardware, and various cables including RS232/RS485 and RJ45 connectors.
4. ترتیب او نصب کول
4.1 فزیکي نصب کول
- پورته کول: Use the provided mounting bracket and hardware to securely attach the SR692 reader to a stable surface. Ensure the antenna side faces the desired reading area.
- د بریښنا پیوستون: Connect the power adapter to the reader's power input port and then plug it into a suitable power outlet.
- د شبکې پیوستون (RJ45): For network communication, connect an Ethernet cable from the reader's RJ45 port to your network switch or router.
- Serial Connection (RS232/RS485): If using serial communication, connect the appropriate cable to the reader's serial port and your host device.
- Wiegand Connection: For Wiegand output, connect the Wiegand interface to your access control system.
شکل 4.1: شاته view of the YANZEO SR692 reader, illustrating the various cable connections including power, RJ45, and serial ports.
د ساوتري شکل بندي
After physical installation, the reader typically requires software configuration for optimal performance and integration with your system. This may involve setting IP addresses, communication parameters (baud rate for serial), and specific RFID tag reading modes. Refer to the accompanying software development kit (SDK) or configuration utility for detailed instructions on software setup.
5. عملیاتي لارښوونې
5.1 بنسټیز عملیات
Once powered on and configured, the SR692 reader continuously emits a UHF radio frequency field. When an RFID tag compatible with the supported protocols (ISO18000-6C/EPC Gen2, ISO18000-6B) enters this field, the reader will detect the tag and read its unique identification data. This data is then transmitted via the configured interface (RJ45, RS232, RS485, or Wiegand) to the connected host system.
5.2 Reading Distance and Performance
The SR692 is designed for long-range reading, with an effective reading distance of up to 9 meters (approximately 30 feet) under ideal conditions. Factors affecting reading performance include:
- Tag ډول: Passive UHF RFID tags.
- Tag لورينه: Optimal reading occurs when the tag is oriented correctly relative to the antenna.
- د چاپیریال مداخله: Metal objects, liquids, and other RF devices can affect performance.
- د انتن ځای پرځای کول: Proper positioning of the integrated 9dBi antenna is crucial for maximizing read range and coverage.
شکل 5.1: مخکی view of the YANZEO SR692 UHF RFID Reader, showing its robust casing and integrated antenna design.
6. ساتنه
- پاکول: Use a soft, dry cloth to clean the exterior of the reader. Do not use abrasive cleaners or solvents.
- د چاپیریال شرایط: While the device has an IP67 rating, it is recommended to install it in a location that minimizes direct exposure to harsh weather conditions or extreme temperatures to prolong its lifespan.
- د کیبل معاینه: Periodically inspect all connected cables for signs of wear or damage. Replace damaged cables immediately.
7. ستونزه حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| Reader not powering on. | د برېښنا رسولو نشته؛ د برېښنا اډاپټر خراب دی؛ اړیکه پرې شوې ده. | Check power outlet; ensure power adapter is securely connected; test with a known good power adapter if available. |
| لوستل نشي کولی tags. | Tag out of range; incorrect tag type; environmental interference; incorrect software configuration. | حرکت tag closer to the reader; ensure tags are UHF RFID; check for metal objects or other RF sources; verify software settings. |
| د شبکې د اتصال ستونزې. | Incorrect IP address; faulty Ethernet cable; network configuration problem. | Verify IP settings; check Ethernet cable; consult network administrator. |
| متضاد tag لوستل کیږي. | Tag orientation; multiple tags in field; interference. | سمون tag orientation; manage tag density; reduce environmental interference. |
8. مشخصات
- ماډل: SR692
- نښه: یانزیو
- ملاتړ شوي پروتوکولونه: ISO18000-6C/EPC Gen2, ISO18000-6B
- کاري فریکونسی: 860-960MHz (wide band)
- انتن: Integrated 9dBi
- د لوستلو فاصله: تر ۱۰ مترو پورې (تقریبا ۳۳ فوټه)
- انٹرفیسونه: RJ45 (Network), RS232, RS485, Wiegand
- د ننوتلو محافظت (IP) درجه بندي: IP67
- ابعاد: Approximately 26cm x 26cm x 3.2cm (15.43 x 10.67 x 2.99 inches)
- وزن: تقریبا ۱ کیلوګرامه (۲.۲ پونډه)
- د هارډویر انٹرفیس: USB
- د معلوماتو د لیږد نرخ: په ثانیه کې 5000 میګابیتونه
9. تضمین او ملاتړ
For warranty information and technical support, please contact your point of purchase or visit the official Yanzeo webسایټ. د تضمین ادعاوو لپاره د پیرود ثبوت په توګه د پیرود رسید وساتئ.
Yanzeo Store: https://www.amazon.com/stores/Yanzeo/page/47DF12D1-A192-426D-99DE-03F0F94ED170
