Roca Aquaria Toilet Seat (Model A801250004) Instruction Manual

1. محصول ختم شوview

The Roca Aquaria Toilet Seat, Model A801250004, is a genuine replacement part designed for compatibility with Roca toilets. It features a durable white lacquered finish and includes stainless steel hinges for reliable performance. The round shape is engineered for easy installation and removal, facilitating cleaning and maintenance.

An image showing the Roca Aquaria toilet seat and lid in white. The lid is partially open, revealing the round shape of the seat. The design emphasizes its smooth, lacquered finish and the integrated stainless steel hinges.

2. د بسته محتويات

مهرباني وکړئ د نصبولو پیل کولو دمخه تصدیق کړئ چې ټولې برخې شتون لري:

• Roca Aquaria Toilet Seat
• Toilet Seat Lid
• Stainless Steel Hinges (pre-attached or separate, depending on packaging)
• د نصبولو هارډویر (بولټونه، واشیرونه، مغز لرونکي)

3. د خوندیتوب معلومات

• Always handle tools with care during installation.
• Do not overtighten mounting hardware, as this may damage the toilet bowl or seat.
• کوچني برخې له ماشومانو څخه لرې وساتئ ترڅو د ټکولو خطرونو مخه ونیسئ.
• Ensure the toilet seat is securely fastened before use to prevent injury.

4. ترتیب او نصب کول

This section outlines the general steps for installing your Roca Aquaria Toilet Seat. Specific toilet models may vary slightly.

اړین وسایل:

• Adjustable Wrench or Screwdriver (depending on bolt type)
• نرم ټوکر

د نصبولو مرحلې:

1. Remove Old Toilet Seat: If replacing an existing seat, lift the hinge covers at the back of the seat. Unscrew the bolts that secure the seat to the toilet bowl. Remove the old seat and clean the area thoroughly.
2. نوې څوکۍ: Place the new Roca Aquaria toilet seat onto the toilet bowl, aligning the hinge posts with the mounting holes on the bowl.
3. د نصبولو هارډویر داخل کړئ: From the top, insert the bolts through the hinge posts and the mounting holes on the toilet bowl.
4. خوندي بولټونه: From underneath the toilet bowl, attach the washers and nuts to the bolts. Hand-tighten them initially.
5. تنظیم او ټینګ کړئ: Adjust the seat position to ensure it is centered and aligned with the bowl. Once satisfied, use an adjustable wrench or screwdriver to firmly tighten the nuts. Do not overtighten.
6. Attach Hinge Covers: Snap the hinge covers back into place over the mounting hardware.
7. د ثبات ازموینه: Gently press down on the seat to ensure it is stable and does not wobble.

5. عملیاتي لارښوونې

The Roca Aquaria Toilet Seat operates like a standard toilet seat. Simply lift the lid and seat to use the toilet, and lower them gently when finished. The stainless steel hinges are designed for smooth movement.

6. ساتنه او پاکول

Proper care will extend the life and maintain the appearance of your toilet seat.

• منظم پاکول: Clean the toilet seat regularly with a soft cloth, warm water, and a mild, non-abrasive soap.
• د سختو کیمیاوي موادو څخه ډډه وکړئ: Do not use abrasive cleaners, scouring pads, strong acids, alkalis, or organic solvents, as these can damage the lacquered finish and hinges.
• وچول: After cleaning, wipe the seat dry with a soft, clean cloth to prevent water spots.
• د قبضې پاملرنه: Periodically check the hinge screws for tightness and re-tighten if necessary to prevent wobbling.

7. ستونزه حل کول

دلته د هغو عامو ستونزو حلونه دي چې تاسو ورسره مخ کیدی شئ:

• Seat is Loose/Wobbles: Check the mounting nuts underneath the toilet bowl. Tighten them securely with a wrench or screwdriver.
• Seat Does Not Align Properly: Loosen the mounting nuts slightly, adjust the seat position until it is centered, then re-tighten the nuts.
• Squeaking Hinges: A small amount of silicone-based lubricant can be applied to the hinge pins if they become noisy. Avoid oil-based lubricants.

8. مشخصات

9. تضمین او ملاتړ

For information regarding warranty coverage or technical support, please refer to the official Roca website or contact Roca customer service directly. Keep your purchase receipt as proof of purchase.

Roca Official Webسایټ: www.roca.com