1. محصول ختم شوview
The JBC Tools CD-2SQF is a high-performance digital soldering station designed for professional use. It offers precise temperature control and rapid heat-up, making it suitable for a wide range of soldering applications. This manual provides essential information for the safe and efficient operation of your soldering station.
شکل 1: JBC Tools CD-2SQF Digital Soldering Station. This image shows the compact soldering station with its integrated stand, cleaning accessories (brass wool and sponge), and the connected T210 soldering iron. The station features a digital display showing temperature and power, along with control buttons.
د بسته محتويات:
- د سي ډي د کنټرول واحد
- T210 Soldering Iron (tip not included)
- CL6210 د پیتل وړۍ
- S0354 سپنج
- ځواک ولګوه
- د کارن لارښود
۴. د تنظیم لارښوونې
بسته بندي کول: Carefully remove all components from the packaging. Inspect for any signs of damage during transit. Retain packaging for future storage or transport.
ځای په ځای کول: Place the CD-2SQF control unit on a stable, level, and heat-resistant surface. Ensure adequate ventilation around the unit.
د سولډرینګ اوسپنې سره وصل کړئ: Connect the T210 soldering iron cable to the designated port on the front of the CD control unit. Ensure the connection is secure.
Prepare Cleaning Station:
- Insert the CL6210 brass wool into its designated compartment on the station.
- Moisten the S0354 sponge with clean water and place it in its compartment. The sponge should be dampلندبل نه.
د بریښنا پیوستون: Connect the power plug to the power input on the rear of the CD control unit. Then, plug the power cord into a grounded electrical outlet (230V AC, 50/60Hz).
ابتدايي بریښنا فعاله: Press the power button on the unit. The LED display will illuminate, indicating the station is ready for operation.
3. Operating the Soldering Station
3.1. بنسټیز عملیات
پاور آن/بند: Press the power button to turn the station on or off. The display will show the current temperature and power status.
د حرارت درجه تنظیمول: د کارولو UP او ښکته arrow buttons on the control unit to adjust the desired soldering temperature. The temperature range is 90-450 °C.
د پاکولو لارښوونه: Regularly clean the soldering iron tip using the brass wool or the damp sponge. This removes excess solder and oxidation, ensuring optimal performance and tip longevity.
سولډرینګ: Apply the soldering iron tip to the joint to be soldered, then feed solder onto the heated joint. Ensure proper wetting and flow of the solder.
یوځای حالت: When the soldering iron is placed in its stand, the station automatically enters standby mode, reducing the tip temperature to prolong its life and save energy.
3.2. Advanced Features (Refer to full manual for details)
- مینو نیویگیشن: د کارولو مینو button to access advanced settings such as temperature presets, sleep mode settings, and unit calibration.
- د PIN ساتنه: The station may feature a PIN protection option to prevent unauthorized temperature changes.
- د فرم ویئر تازه معلومات: JBC may release firmware updates for enhanced functionality. Consult the official JBC webد لارښوونو لپاره سایټ.
4. ساتنه او پالنه
Regular maintenance ensures the longevity and optimal performance of your JBC CD-2SQF soldering station.
د ساتنې لارښوونې: Always tin the soldering iron tip with a small amount of solder before storing it or turning off the station. This prevents oxidation.
د سټیشن پاکول:
- Wipe the control unit and stand with a soft, damp ټوکر د کثافاتو پاکوونکي یا محلول مه کاروئ.
- Periodically replace the brass wool and sponge as they wear out or become excessively dirty.
د کیبل معاینه: Regularly inspect the soldering iron cable and power cord for any signs of damage, fraying, or kinks. Replace damaged cables immediately.
ذخیره کول: When not in use for extended periods, disconnect the station from power and store it in a clean, dry environment.
5. ستونزه حل کول
This section addresses common issues you might encounter with your soldering station.
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| Station does not power on. | No power supply; faulty power cord; internal fuse blown. | Check power connection and outlet. Inspect power cord for damage. If fuse is suspected, contact authorized service. |
| د سولډرینګ اوسپنه نه ګرمیږي. | Soldering iron not properly connected; faulty heating element/tip; station in standby/sleep mode. | Ensure iron is securely connected. Check if the station is in standby (remove iron from stand). Replace tip if necessary. Contact service if problem persists. |
| د تودوخې ښودنه تېروتنه ښیې. | Sensor malfunction; connection issue. | Turn off and restart the station. Check iron connection. If error persists, contact JBC support. |
| Poor solder joint quality. | Incorrect temperature; dirty/oxidized tip; improper soldering technique. | Adjust temperature. Clean and tin the tip. Review soldering technique. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact JBC customer support or an authorized service center.
6. تخنیکي مشخصات
| ماډل | CD-2SQF |
| برانډ | JBC |
| ځواک | 40 واټ |
| والیtage | 230 ولټه |
| د حرارت درجه | ۵۰ - ۲۰۰ درجو سانتي ګراد (۱۲۲ - ۳۹۲ درجو فارنهایټ) |
| د تودوخې ثبات | ± 1.5 ° C (± 3 ° F) |
| ابعاد (L x W x H) | 11 x 19 x 15 سانتي متره (4.3 x 7.5 x 5.9 انچه) |
| وزن | ۷.۰ کیلو ګرامه (۱۵.۵ پونډه) |
| د ښودلو ډول | LED |
| مواد | پلاستیک |
7. تضمین او ملاتړ
JBC products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the official JBC webسایټ ته مراجعه وکړئ یا خپل سیمه ایز توزیع کونکي سره اړیکه ونیسئ.
آنلاین سرچینې: www.jbctools.com
د پیرودونکو خدمت: Refer to the contact information provided on the JBC webستاسو د سیمې لپاره سایټ.
