1. پیژندنه
This manual provides instructions for the safe and efficient operation of your Lepro PR210002-US LED Table Lamp. دا څو اړخیز lamp offers a range of lighting options, including tunable white light, RGB color changing, dimming capabilities, and an auto-off timer. Please read this manual thoroughly before use and retain it for future reference.
Figure 1: Lepro PR210002-US LED Table Lamp.
2. د بسته محتويات
د تنظیم کولو دمخه، مهرباني وکړئ ډاډ ترلاسه کړئ چې ټولې برخې شتون لري:
- 1 x Lepro PR210002-US LED Table Lamp
- 1 x د متحده ایالاتو بریښنا اډاپټر
- 1 x ډوله C USB کیبل
- ۱ x د کارونکي لارښود (دا سند)
3. ترتیب کول
Follow these steps to set up your LED Table Lamp:
- خلاص کړئ: په احتیاط سره د بسته بندۍ څخه ټولې برخې لرې کړئ.
- بریښنا وصل کړئ: Insert the Type C USB cable into the lamp's charging port. Connect the other end of the USB cable to the provided US power adapter, then plug the adapter into a standard wall outlet.
Figure 2: Connecting the lamp to power. The lamp measures 3.9 inches in diameter and 7.1 inches in height, with a 4.9 ft cable.
4. عملیاتي لارښوونې
The Lepro LED Table Lamp features intuitive touch controls located on the top surface and the base.
Figure 3: Touch Control Overview.
4.1. بریښنا فعال/بند
- لنډ مطبوعات: Lightly tap the top touch area (power symbol) to turn the lamp آن یا بند.
4.2. Adjusting White Light (Tunable White Mode)
دamp offers three white light temperatures: 2700K (Warm White), 4000K (Neutral White), and 5700K (Cool White).
- د تودوخې بدلون: Press the 'M' button on the lamp's base to cycle through the white light temperatures (2700K → 4000K → 5700K).
- روښانتیا تنظیم کړئ: While in any white light mode, اوږده فشار the top touch area to continuously adjust the brightness from 5% to 100%. Release when desired brightness is reached.
Figure 4: Tunable White Light Options (2700K, 4000K, 5700K).
4.3. RGB Color Changing Modes
دamp features 7 static RGB colors and an auto-color changing mode.
- Access RGB Modes: Press the 'M' button repeatedly until the lamp enters RGB mode.
- Select Static Color: While in RGB mode, اوږده فشار the top touch area to cycle through the 7 available colors. Release when your desired color is displayed.
- Auto Color Changing: Continue pressing the 'M' button after the static RGB colors to activate the auto-color changing mode.
- Adjust Speed (Auto Mode): While in auto-color changing mode, اوږده فشار the top touch area to adjust the speed of the color transitions (3-level speed).
Figure 5: RGB Color Changing Mood Light.
4.4. Auto-Off Timer
دamp includes a convenient auto-off timer function for 30 or 60 minutes.
- د ټایمر فعالول: Press the timer button (clock symbol) on the lampاساس
- 30-دقیقې ټایمر: One press activates the 30-minute timer (indicated by one green LED on the base).
- 60-دقیقې ټایمر: A second press activates the 60-minute timer (indicated by two green LEDs on the base).
- Deactivate Timer: A third press will turn off the timer function (no green LEDs).
Figure 6: Auto-Off Timer Function.
4.5. د حافظې دنده
دamp retains the last used brightness and color setting when turned off and on again, ensuring a consistent experience.
5. ساتنه
ستاسو د l د اوږد عمر او غوره فعالیت ډاډمن کولو لپارهampد ساتنې دا لارښوونې تعقیب کړئ:
- پاکول: lamp د پاکولو دمخه د بریښنا څخه. د نرم، وچ ټوکر څخه کار واخلئ ترڅو l پاک کړئamp's surface. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- سمبالول: l سمبال کړئamp with care. Avoid dropping it or subjecting it to strong impacts.
- ذخیره کول: که چیرې د l ذخیره کولamp د اوږدې مودې لپاره، ډاډ ترلاسه کړئ چې دا پاک او وچ وي. دا په یخ او وچ ځای کې د مستقیم لمر وړانګو څخه لرې وساتئ.
6. ستونزه حل کول
If you encounter issues with your Lepro LED Table Lamp، لاندې عامو ستونزو او حل لارو ته مراجعه وکړئ:
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| Lamp نه چلیږي. | د بریښنا پیوستون نشته. | Ensure the power adapter is securely plugged into a working outlet and the USB-C cable is firmly connected to the lamp. |
| Brightness adjustment is not smooth or lamp turns off when dimming. | د لمس کنټرول ناسم عملیات. | Ensure you are performing a اوږده فشار on the top touch area to adjust brightness. A short press will turn the lamp off. Release your finger when the desired brightness is achieved. |
| Colors are not changing or cycling. | Not in RGB mode or incorrect operation. | Press the 'M' button to cycle through modes until RGB mode is active. For static colors, اوږده فشار the top touch area. For auto-changing, ensure auto-color changing mode is selected via the 'M' button, then اوږده فشار the top touch area to adjust speed. |
| د ټیمر فعالیت کار نه کوي. | Timer not activated or incorrectly set. | Press the timer button on the base. One green LED indicates 30-minute timer, two green LEDs indicate 60-minute timer. Ensure the correct timer setting is active. |
7. مشخصات
| فیچر | تفصیل |
|---|---|
| د ماډل شمیره | PR210002-US |
| برانډ | لیپرو |
| د محصول ابعاد | ۱۶"د x ۲۶"وچ x ۴۷"ح |
| د توکي وزن | 0.85 پونډه (13.6 اونس) |
| مواد | پلاستیک |
| د رڼا سرچینې ډول | LED |
| روښانتیا | 350 Lumen |
| واټtage | ۴۵ واټه |
| والیtage | 120 وولټ (AC) |
| د روښانه رنګ انتخابونه | 7 Colors + 3 White Light Temperatures (2700K-4000K-5700K) |
| د کنټرول طریقه | لمس |
| د بریښنا سرچینه | د بریښنا تار شوی |
| د کیبل اوږدوالی | 4 پښه |
| د کور دننه / بهر کارول | یوازې د کور دننه کارول |
| د اوبو د مقاومت کچه | د اوبو مقاومت نلري |
8. تضمین او ملاتړ
For warranty information or technical support, please contact Lepro customer service through their official website or the retailer where the product was purchased. Please have your model number (PR210002-US) and purchase details ready when contacting support.
