Lepro 40ft RGB LED Strip Lights User Manual

1. پیژندنه

Thank you for choosing Lepro RGB LED Strip Lights. This manual provides detailed instructions for the safe and efficient use of your new LED strip lights. These versatile lights offer a wide range of colors and modes, perfect for enhancing various indoor environments.

Figure 1: Lepro 40ft RGB LED Strip Lights in a living room setting.

۲. په بکس کې څه دي؟

مهرباني وکړئ د بسته بندۍ محتويات وګورئ ترڅو ډاډ ترلاسه کړئ چې ټول توکي شتون لري:

• 1 x 39.4ft (12m) Non-Waterproof RGB LED Strip
• ۱ x ۲۴-کیلي IR ریموټ کنټرول
• 1 x 24V Power Adapter (US Plug)

3. د خوندیتوب معلومات

Read all safety instructions before installation and use. Keep this manual for future reference.

• یوازې د کور دننه کارول: This product is designed for indoor use and is not waterproof.
• د بریښنا رسول: Use only the provided 24V power adapter. Using an incorrect power supply may damage the product and void the warranty.
• د نصبولو سطحه: ډاډ ترلاسه کړئ چې د نصب کولو سطحه پاکه، وچه او نرمه ده ترڅو د غوره چپکونکي فعالیت لپاره.
• د پټي پرې کول: Only cut the LED strip at designated cut marks (every 3 LEDs). Cutting elsewhere will damage the strip.
• د ډیر تودوخې څخه ډډه وکړئ: Do not coil the LED strip tightly when powered on, as this can cause overheating.
• ماشومان او څاروي: محصول او د هغې اجزا د ماشومانو او څارویو له لاسرسي لرې وساتئ.

۱. تنظیم او نصب کول

د سم نصبولو لپاره دا ګامونه تعقیب کړئ:

1. سطحه چمتو کړئ: Clean the desired installation surface thoroughly to remove dust, oil, or moisture. A clean, dry surface ensures strong adhesion.
2. اندازه کول او پرې کول (که اړتیا وي): Unroll the LED strip and measure the required length. If shortening is needed, cut the strip only at the designated cut marks, typically indicated by a copper line and a scissor icon, every 3 LEDs.
3. پټه ضمیمه کړئ: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
4. Secure with Fixing Clips (Optional): For added security, especially on textured surfaces or corners, use the provided fixing clips. Secure them at regular intervals or critical points along the strip.
5. بریښنا وصل کړئ: د LED پټه د IR ریسیور سره وصل کړئ، او بیا د IR ریسیور د 24V بریښنا اډاپټر سره وصل کړئ. د بریښنا اډاپټر په معیاري بریښنایی آوټ لیټ کې ولګوئ.
6. ریموټ فعال کړئ: Before first use, remove the plastic insulation tab from the battery compartment of the 44-key IR remote control.

Figure 2: Visual guide for LED strip installation steps.

Figure 3: Connection diagram and remote activation.

Figure 4: 3M Adhesive and Fixing Clips.

5. عملیاتي لارښوونې

Control your LED strip lights using the included 44-key IR remote control. Ensure the remote is pointed directly at the IR receiver for optimal response.

Figure 5: 44-Key IR Remote Control Layout.

د ریموټ کنټرول دندې:

• آن/بند: Power button to turn the lights on or off.
• د روښانتیا سمون: د کارولو ↑ او ↓ buttons to increase or decrease brightness.
• د رنګ انتخاب: Choose from 16 preset static colors, including Red, Green, Blue (RGB), and White.
• د DIY رنګونه: 6 programmable DIY buttons allow you to save your favorite custom color mixes.
  • a فشار ورکړئ DIY تڼۍ
  • د کارولو ↑ او ↓ arrows next to R, G, B to adjust the intensity of each primary color.
  • ورته فشار ورکړئ DIY button again to save your custom color.
• د موډل انتخاب: Select from 8 dynamic modes (e.g., Flash, Fade, Jump) to create different lighting effects.
  • فلش: Jumps between colors.
  • FADE3/FADE7: Fades between 3 or 7 colors.
  • JUMP3/JUMP7: Jumps between 3 or 7 colors.
  • اتو: Cycles through all modes.
  • چټک / ورو: د متحرک حالتونو سرعت تنظیموي.

Figure 6: Remote control in use for ambient lighting.

6. ساتنه

Proper maintenance ensures the longevity of your LED strip lights.

• پاکول: Gently wipe the LED strip with a soft, dry cloth to remove dust. Do not use liquid cleaners or immerse the strip in water.
• ذخیره کول: If storing the lights for an extended period, ensure they are clean, dry, and coiled loosely to prevent damage.
• د خړوبولو څخه ډډه وکړئ: Do not bend the LED strip sharply, especially at the connection points, as this can damage the internal circuitry.

7. ستونزه حل کول

که تاسو له ستونزو سره مخ شئ، لاندې عامې ستونزې او حل لارې وګورئ:

8. مشخصات

Figure 7: ETL Listed 24V Power Adapter.

9. تضمین او ملاتړ

د لیپرو محصولات د اعتبار او فعالیت لپاره ډیزاین شوي دي. د ځانګړي تضمین توضیحاتو او پیرودونکي ملاتړ لپاره، مهرباني وکړئ د تضمین کارت ته مراجعه وکړئ چې ستاسو محصول سره شامل دی یا رسمي لیپرو ته مراجعه وکړئ. webسایټ

د اړیکو معلومات:

• Webسایټ: www.lepro.com (مهرباني وکړئ رسمي وګورئ webد اړیکو د تازه معلوماتو لپاره سایټ.)
• بریښنالیک: د محصول بسته بندۍ ته مراجعه وکړئ یا webسایټ