Briidea RV Propane Gas Detector HPA-01 User Manual

1. پیژندنه

The Briidea RV Propane Gas Detector HPA-01 is designed to provide reliable detection of propane gas leaks in recreational vehicles. This device features a digital display for real-time propane concentration monitoring, an adjustable alarm threshold, and an 85dB audible alarm to alert users to potential hazards. This manual provides essential information for the proper installation, operation, and maintenance of your propane gas detector.

2. د محصول ب Featuresې

• د ډیجیټل ټیوب ښودنه: Shows real-time propane value (%LEL) for immediate concentration assessment.
• Adjustable Alarm Threshold: User-settable propane alarm value from 2%LEL to 20%LEL (default 5%LEL).
• د لوړ غږ الارم: Emits an 85dB 'Di-Di-Di' sound when the alarm threshold is exceeded, audible up to 100ft.
• د خاموش فعالیت: Allows temporary silencing of the alarm after activation.
• UL Listed Sensor: Equipped with a Japanese Figaro sensor, certified by ANSI/UL1484, ensuring sensitivity and reliability.
• اوږد خدمت ژوند: Designed for a 5-year operational life, with an end-of-life reminder.
• د بریښنا اړتیا: Operates on 12 VDC, 75mA.

Image: Briidea Propane Gas Detector display showing initialization, error codes (E1, E2, Eo), and replacement reminder.

Image: Diagram illustrating the loudness of the 85dB alarm compared to other sounds, emphasizing its audibility during a gas leak.

3. د خوندیتوب معلومات

• This device is designed for propane gas detection only.
• Ensure proper installation as described in this manual to maximize effectiveness.
• Do not paint the detector. Painting can obstruct sensor openings and impair functionality.
• The alarm will not operate without power. Ensure the 12VDC power supply is consistently connected.
• Do not connect the detector to a wall switch-controlled circuit, as this may inadvertently disable the alarm.
• The sensor has a service life of 5 years. Replace the unit after 5 years from the date of retail sale for continued safety.

4. د بسته محتويات

د کڅوړې د پرانیستلو پر مهال، ډاډ ترلاسه کړئ چې ټول توکي شتون لري:

• 1 x Briidea Propane Gas Detector (HPA-01)
• 1 x د کارن لارښود
• 1 x سکرو ډرایور
• 2 x پیچ
• 2 x Terminal Caps
• 2 x سکرو لنگرونه

5. مشخصات

Image: Dimensions of the Briidea Propane Gas Detector: 4 inches wide, 2.6 inches high, 0.8 inches deep.

6. نصب کول

6.1 پورته موقعیت

Propane gas is heavier than air and tends to settle at lower levels. For optimal detection, install the Briidea Propane Gas Detector:

• Between 4 to 20 inches (10 to 50 cm) off the floor.
• Away from direct airflow from vents, windows, or doors.
• Not directly above or next to cooking appliances or heat sources.
• In a central location within the RV's living space where propane might accumulate.

Image: Illustration showing recommended mounting locations for the propane detector in an RV, specifically 4 to 20 inches off the floor, away from gas appliances.

Image: Briidea Propane Gas Detector installed in an RV kitchen, demonstrating a typical mounting position.

6.2 د تار لګولو لارښوونې

The detector requires a 12 VDC wired connection. Follow these steps for installation:

1. د بریښنا قطع کول: Before beginning installation, ensure that all 12VDC power to the RV is disconnected to prevent electrical shock.
2. Open the Unit: Gently pry open the front cover of the detector. It is designed to separate for access to the wiring terminals.
3. د تارونو نښلول: Locate the power wires in your RV. Typically, red is positive (+) and black is negative (-). Connect the detector's red wire to the RV's 12VDC positive (+) supply and the detector's black wire to the RV's 12VDC negative (-) ground. Use the provided terminal caps for secure connections.
4. کشف کوونکی نصب کړئ: Using the provided screws and anchors, securely mount the detector to the chosen wall location.
5. واحد بند کړئ: Snap the front cover back onto the detector body.
6. د بریښنا بیرته راګرځول: Reconnect the 12VDC power to your RV. The detector will begin its initialization sequence.

یادونه: If replacing an existing detector, ensure the new wiring matches the polarity of the previous installation. If you are unsure about wiring, consult a qualified electrician.

7. عملیات

7.1 Power-Up and Initialization

Upon initial power-up, the digital display will show '---' indicating sensor initialization. This process typically takes a few minutes. Once initialized, the display will show '0.0' or the current detected propane concentration in %LEL.

7.2 Real-time Display

The digital display continuously shows the real-time propane concentration in %LEL (Lower Explosive Limit). A reading of '0.0' indicates no detectable propane gas.

7.3 د الارم فعالول

If the detected propane concentration exceeds the set alarm value, the detector will:

• Display 'HI' on the digital screen.
• Emit a loud 'Di-Di-Di' audible alarm (85dB).

In case of an alarm, immediately take action to ventilate the RV and identify the source of the leak. Refer to the Safety Information section for further guidance.

7.4 خاموش فعالیت

After an alarm is triggered, you can press the 'TEST/MUTE' button to temporarily silence the audible alarm. The display will continue to show 'HI' until the propane concentration drops below the alarm threshold.

Image: Briidea RV Propane Gas Alarm display showing real-time LEL values, alarm setting range (2%-20% LEL), and mute function.

8. Setting the Alarm Value

The Briidea Propane Gas Detector allows you to adjust the propane alarm threshold between 2%LEL and 20%LEL. The default setting is 5%LEL.

1. Ensure the detector is powered on and in normal operating mode (displaying %LEL).
2. Press and hold the 'TEST/MUTE' button for approximately 5 seconds until the display shows the current alarm setting.
3. While the alarm setting is displayed, short press the 'TEST/MUTE' button repeatedly to cycle through the available alarm values (2%LEL, 3%LEL, ..., 20%LEL).
4. Stop pressing the button when your desired alarm value is displayed. The detector will automatically save the new setting after a few seconds and return to displaying the real-time %LEL.

9. ساتنه

۷.۳ منظم ازموینه

It is recommended to test the detector regularly (e.g., monthly) by briefly exposing it to a small amount of propane gas (e.g., from an unlit propane lighter held briefly near the sensor). The alarm should activate. If it does not, refer to the Troubleshooting section.

9.2 پاکول

Clean the exterior of the detector periodically with a soft, damp cloth. Do not use harsh chemicals, abrasive cleaners, or spray directly onto the unit. Ensure no dust or debris obstructs the sensor openings.

9.3 Sensor End of Life

The Japanese Figaro sensor has a service life of 5 years. After this period, the detector will display 'Eo' (End of Life) to remind you that the product needs to be replaced. For continued safety, replace the unit promptly when 'Eo' is displayed.

10. ستونزه حل کول

د عامو ستونزو او د هغوی د حل لارو لپاره لاندې جدول ته مراجعه وکړئ:

11. د پیرودونکي ملاتړ

For technical assistance, warranty inquiries, or replacement parts, please contact Briidea customer support. Refer to the contact information provided with your purchase or visit the official Briidea webسایټ