د لارښوونې لارښود

محصول پای ته ورسیدview

This manual provides essential information for the Valberg 36051207 outer glass panel, designed for use with Valberg ovens and cookers. It covers important aspects such as installation, proper usage, maintenance, and troubleshooting to ensure the longevity and optimal performance of your appliance's glass panel.

The outer glass panel serves as a protective and insulating layer for your oven or cooker door, contributing to energy efficiency and user safety by keeping the exterior cooler during operation.

An image showing the Valberg 36051207 outer glass panel for ovens and cookers. The panel is rectangular, black-framed, with a clear glass insert in the center. The 'VALBERG' logo is visible at the bottom center of the black frame.

تنظیم او نصب کول

Before beginning installation, ensure the oven or cooker is completely cool and disconnected from the power supply. It is recommended to wear protective gloves during this process.

1. چمتووالی: Carefully remove the oven door from its hinges according to your oven's specific instructions. Place the door on a soft, flat surface to prevent scratching.
2. Accessing the Panel: Depending on your oven model, you may need to remove screws or clips that secure the existing outer glass panel or the door's inner frame. Refer to your oven's original manual for precise disassembly steps.
3. Removing Old Panel: Once unsecured, carefully lift and remove the old or damaged outer glass panel. Dispose of any broken glass safely.
4. پاکول: Clean the interior of the oven door frame and any remaining glass surfaces to remove grease or debris before installing the new panel.
5. Installing New Panel: Position the new Valberg 36051207 outer glass panel into the designated slots or frame of the oven door. Ensure it sits flush and is correctly aligned.
6. خوندي کول: Reattach any screws, clips, or securing mechanisms that were removed earlier. Tighten them firmly but do not overtighten, as this could damage the glass or frame.
7. بیا یوځای کول: Reinstall the oven door onto its hinges, ensuring it opens and closes smoothly and securely.
8. وروستی چک: Reconnect the oven to the power supply and perform a brief test to ensure the door functions correctly and the glass panel is stable.

If you are unsure about any step, it is advisable to consult a qualified technician.

عملیاتي لارښوونې

The Valberg 36051207 outer glass panel is designed for durability and safety. To ensure its proper function and longevity:

• د اغیزو څخه ډډه وکړئ: Do not strike the glass panel with hard objects, as this can cause cracks or breakage.
• د تودوخې بدلونونه: While the glass is designed to withstand high temperatures, avoid sudden extreme temperature changes, such as pouring cold water on a hot glass panel.
• Proper Closure: Always ensure the oven door is fully closed during operation to maintain proper insulation and cooking performance.

ساتنه او پاکول

Regular cleaning of the outer glass panel will maintain its appearance and allow for clear visibility into the oven.

• ورځنی پاکوالی: For light spills or smudges, wipe the glass with a soft cloth dampened with warm, soapy water. Dry thoroughly with a clean, dry cloth to prevent water spots.
• ضدي داغونه: For baked-on grease or stubborn stains, use a non-abrasive oven cleaner specifically designed for glass surfaces. Apply the cleaner according to its instructions, allow it to sit, and then wipe clean. Avoid using abrasive pads, scouring powders, or harsh chemicals that can scratch or damage the glass surface.
• د تیزو شیانو څخه ډډه وکړئ: Do not use razor blades or sharp metal objects to scrape off residue, as this can permanently scratch the glass.
• سړه سطحه: Always clean the glass panel when it is cool to the touch to prevent burns and ensure cleaning product effectiveness.

د ستونزو حل کول

If you encounter issues with your Valberg outer glass panel, consider the following common solutions:

• Glass Appears Loose: If the glass panel feels loose, it may indicate that the securing screws or clips are not tightened sufficiently. Refer to the "Setup and Installation" section to re-secure the panel. Ensure not to overtighten.
• Condensation Between Panels: If condensation appears between the outer and inner glass panels, it might indicate a seal issue or that the door was not properly reassembled. Review the installation steps or consult a technician.
• په شیشه باندې خراشونه: Minor scratches can sometimes be polished out with specialized glass scratch removal kits, but deep scratches may require panel replacement. Prevent scratches by avoiding abrasive cleaners and tools.
• Cracked or Shattered Glass: A cracked or shattered glass panel requires immediate replacement. Do not use the oven until the panel is replaced to ensure safety and proper insulation.

For issues not covered here or if problems persist, contact Valberg customer support or a certified appliance technician.

مشخصات

Key specifications for the Valberg 36051207 Outer Glass Panel:

تضمین او ملاتړ

For information regarding warranty coverage for your Valberg 36051207 outer glass panel, please refer to the original purchase documentation or contact Valberg customer service directly. Availability of spare parts information is generally provided by the manufacturer or authorized distributors.

For technical assistance, spare parts, or service inquiries, please contact Valberg customer support through their official website or the contact details provided with your appliance purchase.