Güde GPR 822 PRO Post Driver Instruction Manual

پیژندنه

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Güde GPR 822 PRO Post Driver. Please read these instructions carefully before using the device to ensure proper handling and to prevent injury or damage. Keep this manual in a safe place for future reference.

د خوندیتوب لارښوونې

Always observe general safety regulations when operating power tools. Failure to follow these instructions may result in serious injury or property damage.

• Wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and sturdy gloves.
• ډاډ ترلاسه کړئ چې د کار ساحه د لیدونکو، په ځانګړې توګه ماشومانو او څارویو څخه پاکه ده.
• Operate the post driver only in well-ventilated areas.
• Do not operate the machine if you are tired, under the influence of drugs, alcohol, or medication.
• Inspect the device for any damage before each use. Do not operate a damaged machine.
• Handle fuel with extreme care. Store fuel in approved containers and away from ignition sources.
• Never refuel the engine while it is running or hot. Allow it to cool down.
• لاسونه او پښې د حرکت کولو برخو څخه لرې وساتئ.
• Secure the post firmly before driving to prevent kickback.
• Do not modify the post driver in any way.

محصول پای ته ورسیدview

The Güde GPR 822 PRO is a powerful, portable post driver designed for efficiently installing fence posts. It features a robust 4-stroke engine for reliable performance.

Image: The Güde GPR 822 PRO Post Driver, showcasing its engine and driving mechanism. This view highlights the main components of the device.

Image: The Güde GPR 822 PRO Post Driver stored securely within its durable black carrying case, ready for transport or storage.

مهمې برخې:

• انجن: 4-stroke gasoline engine.
• د تیلو ټانک: For gasoline.
• د تیلو ټانک: For engine oil.
• سمبالول: For gripping and controlling the device.
• Driving Mechanism: The part that impacts the post.
• پیل کونکی: Recoil start system.

تخنیکي مشخصات

تنظیم او چمتو کول

Before starting the post driver, ensure it is properly prepared with fuel and oil.

1. Fueling the Engine:

Use only clean, fresh gasoline. The fuel tank capacity is 0.6 liters.

• ډاډ ترلاسه کړئ چې انجن بند او یخ دی.
• Move to a well-ventilated area away from open flames or sparks.
• د تیلو د ټانک سر په احتیاط سره خلاص کړئ.
• Fill the tank with gasoline, being careful not to overfill.
• د تیلو د ټانک سر په خوندي ډول وتړئ.
• هر ډول توزیع شوي تیل سمدلاسه پاک کړئ.

2. د انجن تیلو اضافه کول:

The engine requires 10W40 engine oil. The oil capacity is 0.07 liters.

• Place the post driver on a level surface.
• Locate the oil filler cap.
• Remove the cap and carefully pour 0.07 liters of 10W40 engine oil into the oil tank.
• Replace the oil filler cap securely.
• د هرې کارونې دمخه د تیلو کچه وګورئ.

Image: A clear measuring cup, typically used for accurately measuring fuel or oil volumes before adding them to the engine.

Image: A set of T-handle wrenches and a measuring cup, essential tools for assembly, maintenance, and precise fluid measurement for the post driver.

عملیاتي لارښوونې

د انجن پیل کول:

1. Place the post driver on a stable, level surface.
2. Ensure the fuel and oil levels are correct.
3. د انجن سویچ "آن" حالت ته تنظیم کړئ.
4. که انجن سړه وي، نو چوک وکړئ.
5. Pull the recoil starter handle firmly and smoothly until the engine starts. Do not pull the cord to its full extension.
6. Once the engine starts, gradually open the choke (if used).
7. Allow the engine to warm up for a few moments before operating.

Driving Posts:

1. Position the post driver squarely over the top of the fence post.
2. Ensure the post is vertical and stable before beginning to drive.
3. Hold the post driver firmly with both hands, maintaining a secure grip on the handles.
4. Engage the throttle to increase engine speed and begin the driving action.
5. Apply steady, downward pressure to guide the post driver and keep it centered on the post.
6. Continue driving until the post reaches the desired depth.
7. Release the throttle to reduce engine speed and stop the driving action.
8. Carefully lift the post driver off the post.

د انجن بندول:

1. Release the throttle to allow the engine to idle.
2. Set the engine switch to the "OFF" position.
3. Wait for the engine to cool down before storing or performing maintenance.

ساتنه

Regular maintenance ensures the longevity and optimal performance of your post driver.

د هر استعمال وروسته:

• Clean the exterior of the post driver, removing dirt, dust, and debris.
• Check for any loose fasteners and tighten them as necessary.
• Inspect the driving mechanism for wear or damage.

Regular Checks (e.g., every 10-20 operating hours):

• د انجن تیل: Check the oil level and top up if necessary. Change the oil according to the manufacturer's recommendations (typically after the first 5-10 hours, then every 50 hours).
• د هوا فلټر: د هوا فلټر معاینه او پاک کړئ. که ډیر ککړ یا زیانمن شوی وي نو بدل یې کړئ.
• سپارک پلګ: Inspect the spark plug for wear and carbon buildup. Clean or replace as needed.
• د تیلو فلټر: Check and clean or replace the fuel filter if necessary.

ذخیره کول:

• د اوږدې مودې ذخیره کولو لپاره، د تیلو ټانک وچ کړئ یا د تیلو سټیبلائزر اضافه کړئ.
• ټول ماشین په ښه توګه پاک کړئ.
• Store the post driver in a dry, clean, and secure location, out of reach of children.

د ستونزو حل کول

This section addresses common issues you might encounter. For problems not listed here, contact qualified service personnel.

تضمین او ملاتړ

Information regarding warranty coverage and spare parts availability is not provided in the product details. For warranty claims, technical support, or to inquire about spare parts, please contact your authorized Güde dealer or the manufacturer's customer service directly. Always provide your model number (94422) and purchase date when seeking support.

Manufacturer: Güde

د ماډل شمیره: 94422