د فاکس ۳۲ سټیپ کاسټ فعالیت فورک کارونکي لارښود

پیژندنه

This manual provides essential information for the setup, operation, and maintenance of your FOX 32 STEP CAST PERFORMANCE 100 15QRx110mm 1.5T mountain bike fork. Designed for cross-country performance, this fork features a lightweight Step-Cast chassis, a redesigned crown for increased stiffness, and advanced damping technology to enhance your riding experience.

The FOX 32 Step-Cast Performance fork is engineered to meet the demands of competitive cross-country riding, offering a balance of low weight and robust performance. Its unique Step-Cast chassis design optimizes weight savings while providing clearance for spokes and brake rotors. Key features include black anodized upper tubes, 32mm stanchions, a FIT GRIP damper, and a FLOAT air spring.

محصول پای ته ورسیدview

شکل 1: مخکی view of the FOX 32 Step-Cast Performance fork, showcasing its matte black finish and distinct Step-Cast lower leg design.

شکل ۳: زاویه لرونکی view of the fork, illustrating the unique Step-Cast chassis which reduces weight and provides clearance for bike components.

شکل ۳: د اړخ پروfile of the fork, showing the full length and the black anodized upper tubes.

Figure 4: Detail of the blue top caps, indicating the FLOAT Air spring on the left and the GRIP damper with Open/Firm settings on the right.

شکل 5: View of the lower leg, showing the red rebound adjuster knob and the 15QRx110mm axle system.

شکل 6: مفصل view of the "32 STEP-CAST PERFORMANCE" graphics on the fork's lower leg.

چمتو کول

Proper setup is crucial for optimal performance and safety. Always refer to the detailed instructions on the official FOX website for the most accurate and up-to-date setup guides, including air pressure settings and damper adjustments based on rider weight and riding style.

ابتدايي نصب کول

• د سټیرر ټیوب چمتو کول: The fork comes with a 264mm tapered steerer tube. Cut the steerer tube to the appropriate length for your bicycle frame and stem combination. Ensure proper headset installation.
• Wheel Compatibility: This fork is designed for 27.5-inch wheels and features a 15QRx110mm Boost axle spacing. Ensure your wheel is compatible.
• د بریک مطابقت: The fork is compatible with disc brakes. Install your brake caliper according to the brake manufacturer's instructions.

Air Spring Setup (FLOAT Air Spring)

The FLOAT air spring allows for precise tuning of the fork's firmness. Use a high-pressure shock pump to adjust the air pressure in the main air chamber. Consult the FOX website or the sticker on the fork leg for recommended air pressure settings based on your weight and riding preferences. Always cycle the fork through its travel several times after adding or releasing air to equalize pressures.

Sag Setting

Sag is the amount the suspension compresses under the rider's weight. Setting sag correctly is fundamental for proper suspension performance. Typically, for cross-country forks, sag is set between 15-20% of the total travel (100mm for this model). Refer to FOX's official guides for detailed sag measurement procedures.

عملیاتي تنظیمات

FIT GRIP Damper

The FIT GRIP damper provides on-the-fly compression adjustments. The blue lever on the top right of the fork crown allows you to switch between "Open" and "Firm" modes:

• خلاص حالت: Provides full suspension travel and maximum small bump compliance, ideal for technical descents and rough terrain.
• د قاطع حالت: Increases compression damping for a firmer ride, reducing suspension movement during climbing or on smooth terrain.

د بیرته راګرځیدو سمون

The red knob located at the bottom of the right fork leg controls the rebound damping. Rebound damping controls how quickly the fork extends after compression. Turning the knob clockwise (towards "Slow") slows down the rebound, while turning it counter-clockwise (towards "Fast") speeds it up. Adjust this setting to prevent the fork from packing up on successive bumps or feeling too bouncy.

ساتنه

Regular maintenance ensures the longevity and optimal performance of your FOX fork. Always consult the official FOX service intervals and guides for detailed procedures.

د معمول پاکول

• After every ride, wipe down the stanchions (upper tubes) with a clean, soft cloth to remove dirt and debris.
• ټول فورک په نرم صابون او اوبو سره پاک کړئ. د لوړ فشار واشیرونو څخه ډډه وکړئ چې په مستقیم ډول په مهرونو باندې ولګول شي.
• Inspect the fork for any signs of damage, leaks, or unusual wear.

Air Pressure Check

Check your air spring pressure before every ride using a high-pressure shock pump. Air pressure can fluctuate with temperature changes and over time.

د خدماتو وقفې

FOX recommends regular service for their suspension products. This typically includes lower leg service (dust wiper and foam ring replacement, oil change) and a full damper/air spring service at specified intervals. Refer to the FOX website for the most current service schedules and authorized service centers.

د ستونزو حل کول

This section addresses common issues you might encounter with your FOX 32 Step-Cast Performance fork. For complex issues or if you are unsure, contact an authorized FOX service center.

د هوا د فشار له لاسه ورکول

• نښې: Fork feels soft, bottoms out easily, or loses travel.
• احتمالي لامل: Low air pressure, leaky air valve, or internal air seal issue.
• حل لاره: Check air pressure and reinflate. Ensure valve cap is tight. If pressure loss persists, it may indicate an internal seal problem requiring professional service.

بې وزله ډيamping Performance

• نښې: Fork feels too bouncy (fast rebound) or packs up (slow rebound), or lacks compression support.
• احتمالي لامل: Incorrect rebound/compression settings, low damper oil level, or contaminated damper oil.
• حل لاره: Adjust rebound and compression settings. If issues persist, the damper may require service by an authorized technician.

Unusual Noises (Creaking, Clunking)

• نښې: Audible creaking or clunking sounds during fork compression or extension.
• احتمالي لامل: Loose headset, loose axle, dry bushings, or internal component wear.
• حل لاره: Check headset tightness and axle security. If noises continue, professional inspection is recommended.

مشخصات

تضمین او ملاتړ

For detailed warranty information, please refer to the official FOX webسایټ یا د تضمین کارت چې ستاسو محصول سره شامل دی. د تضمین شرایط او مقررات ممکن د سیمې او محصول له مخې توپیر ولري.

For technical support, service, or to find an authorized service center, please visit the official FOX webسایټ:

www.ridefox.com

Always use genuine FOX replacement parts and have service performed by qualified technicians to maintain product integrity and warranty validity.