پیژندنه
This manual provides detailed instructions for the DKARDU DC 5V-12V Mini Microphone Amplifier Board. This module is designed to amplify audio signals from various microphone types, including electret, condenser, and moving coil microphones, for output to speakers. It is suitable for a wide range of audio projects and applications.
انځور: اوورview of the DKARDU Mini Microphone Amplifier Board kit, including two amplifier modules, two electret microphones, and two power cables.
په بکس کې څه دي
په بسته کې لاندې برخې شاملې دي:
- 2 x DC 5V-12V Micro Electret Ampد ژوند کولو بورډونه
- 2 x Electret Microphones
- 2 x DC Female Power Pigtail Cables
مشخصات
د دې لپاره تفصيلي تخنیکي مشخصات ampد ژوند کولو ماډل:
| پیرامیټر | ارزښت |
|---|---|
| د عملیاتو Voltage | 5V-12V DC (Voltage below 5V will significantly reduce sound; do not exceed 15V) |
| عملیاتي اوسنۍ | 1mA (static) ~ 150mA (max) |
| Output Speaker Impedance | 4 Ω - 32 Ω (Higher impedance results in higher efficiency) |
| Supported Speaker Power | 0.5W-25W (Any power speaker can be used, volume is not directly proportional to speaker power, as long as it's greater than amplifier output rating) |
| د اعظمي تولید بریښنا | 750mW |
| د ننوتلو ملاتړ | Electret microphone, condenser microphone, moving coil microphone, audio signal |
| ابعاد (LxWxH) | 20 x 12 x 6mm / 0.79 x 0.47 x 0.23 انچه |
انځور: تفصیلي view د amplifier board highlighting its key parameters.
انځور: د amplifier board, showing its compact size.
چمتو کول
Follow these steps to correctly set up your ampد ژوندي کولو تخته:
- مایکروفون سره وصل کړئ: Use a shielded cable to connect the electret microphone to the 'IN' and 'GND' terminals of the amplifier board. Pay close attention to the polarity of the electret microphone; incorrect polarity will result in very low or no sound.
- سپیکر سره وصل کړئ: Connect your speaker to the 'OUT' terminals of the amplifier board. Ensure the speaker is positioned away from the microphone to prevent self-excited noise (feedback).
- بریښنا وصل کړئ: Connect a DC power supply (5V-12V) to the positive and negative terminals of the ampلایف بورډ WARNING: Do not reverse the polarity of the power supply, as this will damage the module.
Image: A clear wiring diagram illustrating how to connect the DC power supply, microphone, and speaker to the ampلایف بورډ
عملیاتي لارښوونې
Once properly set up, the amplifier board will begin to amplify the audio signal from the connected microphone. The module supports various microphone types and can be integrated into different audio systems.
- د حجم سمون: The board features a small potentiometer (labeled 'VOL') for adjusting the output volume. Use a small screwdriver or appropriate tool to carefully turn the potentiometer to achieve the desired volume level.
- د ننوتلو مطابقت: د amplifier is designed to work with electret, condenser, and moving coil microphones, as well as general audio signals.
انځور: د amplifier board, illustrating its compatibility with electret, microphone, condenser microphone, moving coil microphone, and general audio signals.
انځور: Examples of different applications and wiring configurations for the amplifier board, demonstrating its versatility.
ساتنه
To ensure the longevity and optimal performance of your DKARDU Mini Microphone Amplifier Board, consider the following maintenance guidelines:
- وچ ساتل: Protect the module from moisture and liquids, as water can cause short circuits and damage components.
- په نرمۍ سره پاک کړئ: If cleaning is necessary, use a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- په احتیاط سره سمبالول: The board contains delicate electronic components. Avoid dropping or subjecting it to strong impacts.
- مناسب ذخیره کول: When not in use, store the module in a cool, dry place, away from direct sunlight and extreme temperatures.
د ستونزو حل کول
که تاسو د خپلو ستونزو سره مخ شئ amplifier board, refer to the following common problems and solutions:
- Very Little or No Sound:
- Check the polarity of the electret microphone connection to the 'IN' and 'GND' terminals. Reversing the polarity will significantly reduce or eliminate sound.
- د بریښنا رسولو حجم ډاډمن کړئtage is within the 5V-12V range. Voltage below 5V will result in significantly reduced sound.
- Verify all connections are secure and correct according to the wiring diagram.
- Self-Excited Noise (Feedback):
- Ensure the speaker is positioned sufficiently far away from the microphone to prevent audio feedback.
- Check for proper shielding of the microphone cable.
- Module Not Functioning / Damaged:
- Verify that the DC power supply polarity is correct. Reversing the positive and negative connections will burn out the module.
- د ننوتلو حجم ډاډمن کړئtagد 15V څخه ډیر نه وي.
Image: Important notes for the amplifier board, emphasizing correct wiring and power supply to prevent damage and ensure proper function.
تضمین او ملاتړ
For warranty information and customer support, please refer to the documentation provided with your purchase or contact DKARDU customer service through the retailer where the product was acquired. Keep your proof of purchase for any warranty claims.
