1. پیژندنه
The Waveshare A7670E LTE Cat-1 HAT is an expansion board designed for Raspberry Pi series boards, providing LTE Cat-1 and 2G communication capabilities, along with LBS (Location-Based Service) positioning. This HAT integrates the A7670E module, supporting various communication protocols and features essential for IoT applications, remote monitoring, and data transmission.
Figure 1: Waveshare A7670E LTE Cat-1 HAT module. This image displays the compact design of the A7670E HAT, highlighting its various components including the SIM card slot, USB port, audio jack, and GPIO pins.
2. ځانګړتیاوې
- Standard Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi series boards.
- Supports communication protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL.
- Supports dial-up networking, telephone calls, and SMS functionality.
- LBS base station positioning for approximate location information via mobile network.
- TTS (Text To Speech) feature, converting Chinese/English texts into spoken words.
- Onboard USB interface for AT Commands testing and network communication.
- Integrated audio jack for sound recording, telephone calls, and listening to TTS output.
- Breakout common A7670X module control pins for easy connection with host boards like Arduino/STM32.
- SIM card slot supporting 1.8V/3V SIM cards.
- Two LED indicators for monitoring operating status.
- د الوتکې ټوکtage translator, allowing operating voltage configuration to 3.3V or 5V via jumper.
شکل 2: پایview of A7670E HAT features. This graphic summarizes the key functionalities such as multi-band support, Cat-1/GSM/GPRS, LBS positioning, dial-up, cloud platform compatibility, and phone call/SMS support.
3. د بسته بندي مینځپانګه
ډاډ ترلاسه کړئ چې لاندې ټول توکي ستاسو په بسته کې شامل دي:
- A7670E LTE Cat-1 HAT module
- LTE انتن
- د USB ډول A څخه د C کیبل ډول
- Screws and standoffs for mounting
Figure 3: Contents of the A7670E HAT package. This image shows the A7670E module, an LTE antenna, a USB-C cable, and mounting hardware (screws and standoffs).
4. ترتیب کول
4.1 Physical Connection to Raspberry Pi
- Align the 40-pin GPIO header of the A7670E HAT with the GPIO pins on your Raspberry Pi board.
- Gently press the HAT onto the Raspberry Pi's GPIO header until it is securely seated.
- Use the provided standoffs and screws to secure the HAT to the Raspberry Pi for stability.
Figure 4: A7670E HAT connected to a Raspberry Pi. This image illustrates the HAT mounted directly onto the Raspberry Pi's 40-pin GPIO header, showing a compact and integrated setup.
4.2 د سیم کارت نصب کول
- Locate the SIM card slot on the A7670E HAT.
- Insert a 1.8V or 3V SIM card into the slot, ensuring correct orientation as indicated on the module.
- Gently push the SIM card until it clicks into place. To remove, push again to release.
4.3 د انتن کنکشن
- Connect the provided LTE antenna to the IPEX1 connector on the A7670E HAT.
- Ensure the connection is secure for optimal signal reception.
4.4 ټوکtage ترتیب کول
عملیاتي حجمtage can be configured to 3.3V or 5V using the onboard jumper. Refer to the module's silkscreen for jumper positions. Ensure the correct voltage is selected to match your Raspberry Pi model or other host board requirements.
5. عملیاتي لارښوونې
5.1 Dial-Up on Windows/Linux
The A7670E HAT supports dial-up networking. For detailed instructions on setting up dial-up on Windows or Linux operating systems, refer to the comprehensive development resources provided by Waveshare. This typically involves installing drivers and configuring network settings to establish a connection.
شکل 5: مثالample of dial-up connection on a Windows/Linux device using the A7670E HAT. This image shows a Raspberry Pi connected to a display, demonstrating network connectivity via the HAT.
5.2 Cloud Communication
The module supports various cloud communication protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL. This enables the Raspberry Pi to send and receive data from cloud platforms for IoT applications. Communication can be established via USB or UART using AT commands.
Figure 6: Diagram illustrating cloud communication pathways. This graphic depicts how the Raspberry Pi (or other MCU) communicates with the A7670E module via USB or UART, which then connects to the internet using Cat-1/2G protocols for cloud services.
5.3 Telephone Call & SMS Support
The A7670E HAT can be used for making telephone calls and sending/receiving SMS messages. This functionality is typically controlled via AT commands sent to the module. The onboard audio jack allows for connecting a headset for voice communication.
Figure 7: Demonstration of telephone call and SMS functionality. This image shows a mobile phone interface for calls and messages, alongside a terminal window displaying AT commands for module control.
5.4 AT کمانډونه
The A7670E module is controlled primarily through AT commands. These commands are sent via the USB interface or UART. Refer to the A7670E module's AT Command Set documentation for a complete list of commands and their usage. Examples for Raspberry Pi, Arduino, and STM32 are available in the provided development resources.
6. مشخصات
| فیچر | تفصیل |
|---|---|
| Frequency Band (LTE Cat-1) | LTE-FDD: B1, B3, B5, B7, B8, B20 |
| Frequency Band (2G) | GSM/GPRS/EDGE: 900/1800 MHz |
| د SMS ملاتړ | MT, MO, CB, Text, PDU |
| د آډیو ځانګړتیا | Standard 3.5mm audio jack for audio input/output |
| د بریښنا رسول | 5V |
| د عملیاتو Voltage | 5V / 3.3V (configurable via jumper) |
| د عملیاتي حرارت درجه | -30°C ~ 80°C |
| د ذخیرې د حرارت درجه | -45°C ~ 90°C |
| ابعاد | 65 × 30.5 ملي میتر |
| ارتباط | GPIO, USB |
| د عملیاتي سیسټم ملاتړ | وینډوز، لینوکس |
| د سیم کارت سلاټ | Supports 1.8V and 3V SIM card |
| UART | Supports AT commands through UART, compatible with 3.3V/5V operating voltage |
| USB پورټ | Supports AT commands testing, network communication, firmware upgrading, etc. |
| د انتن نښلونکی | د LTE اصلي انتن |
7. Pinout Definition
The A7670E HAT utilizes the Raspberry Pi's 40-pin GPIO header. Understanding the pinout is crucial for advanced integration and custom applications.
Figure 8: Pinout diagram for the A7670E HAT. This diagram details the function of each pin on the 40-pin GPIO header, including power, ground, UART (RXD, TXD), and control pins like P4 (module on/off control).
8. Outline Dimensions
The physical dimensions of the A7670E HAT are important for enclosure design and integration into projects.
Figure 9: Outline dimensions of the A7670E HAT. This image, also showing the pinout, includes measurements in millimeters for the module's length, width, and component placement.
۴. د انتخاب لارښود
Waveshare offers various LTE HATs. The following table provides a comparison to help in selecting the appropriate module for specific regional and application requirements.
Figure 10: Comparison table for Waveshare LTE HATs. This guide outlines different models (A7670E, A7600C1, A7600E, SIM7600E) with their applicable regions, supported bands, data rates, software features, and hardware interfaces.
10. ساتنه
To ensure the longevity and optimal performance of your A7670E LTE Cat-1 HAT, consider the following:
- Keep the module in a clean, dry environment, away from dust and moisture.
- Avoid exposing the HAT to extreme temperatures or direct sunlight.
- Ensure proper ventilation when integrated into an enclosure to prevent overheating.
- Periodically check for firmware updates from Waveshare to benefit from performance improvements and bug fixes.
11. ستونزه حل کول
If you encounter issues with your A7670E LTE Cat-1 HAT, consider the following common troubleshooting steps:
- هیڅ بریښنا/LED بند نه دي: Verify the power supply to your Raspberry Pi and ensure the HAT is correctly seated on the GPIO pins. Check the voltagد جمپر ترتیب.
- د شبکې اړیکه نشته:
- Ensure the SIM card is correctly inserted and active with a valid data plan.
- د انتن پیوستون چیک کړئ.
- ستاسو په سیمه کې د شبکې پوښښ تایید کړئ.
- Confirm correct APN settings in your software configuration.
- AT Commands Not Responding:
- Ensure the USB cable is connected or UART pins are correctly wired.
- Verify the serial port settings (baud rate, parity, data bits, stop bits).
- Check if the module is powered on (PWRKEY pin control).
- LBS Positioning Inaccurate: LBS positioning relies on cellular network base stations and may provide approximate location data, not precise GPS coordinates. Accuracy can vary significantly based on network density.
For more detailed troubleshooting or specific technical issues, refer to the official Waveshare documentation and support resources.
12. تضمین او ملاتړ
Waveshare products typically come with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the official Waveshare webسایټ ته مراجعه وکړئ یا مستقیم د دوی د پیرودونکو ملاتړ سره اړیکه ونیسئ.
تخنیکي ملاتړ: Waveshare provides comprehensive development resources, including documentation, example code for Raspberry Pi/Arduino/STM32, and technical support. These resources are essential for successful integration and operation of the A7670E HAT.
د نورو مرستو لپاره، لیدنه وکړئ Waveshare Official Webسایټ or their dedicated product support pages.
