BSIDE S10 Digital Multimeter User Manual

1. پیژندنه

This manual provides essential instructions for the safe and effective operation of your BSIDE S10 Digital Multimeter. Please read this manual thoroughly before using the device to ensure proper function and to prevent potential hazards. The BSIDE S10 is designed for measuring DC/AC voltage, resistance, capacitance, frequency, diode, continuity, and features non-contact voltage (NCV) detection and live wire checking.

2. د خوندیتوب معلومات

WARNING: To avoid electric shock or personal injury, please read and follow all safety instructions carefully.

• تل ډاډ ترلاسه کړئ چې ملټي میټر د کارولو دمخه په ښه کاري حالت کې دی.
• د والیت غوښتنه مه کوئtagد اعظمي ټاکل شوي حجم څخه ډیرtage, which is 620V for both AC and DC.
• Do not use the multimeter if the test leads are damaged or if the device appears to be malfunctioning.
• د حجم سره کار کولو پرمهال خورا احتیاط وکړئtagد 30V AC RMS، 42V چوکۍ، یا 60V DC څخه پورته. دا حجمونهtagد شاک خطر رامنځته کوي.
• تل د مقاومت، ظرفیت، یا دوام اندازه کولو دمخه د ازموینې لاندې سرکټ سره بریښنا قطع کړئ.
• کله چې د بیټرۍ ټیټ شاخص څرګند شي نو ژر تر ژره بیټرۍ بدل کړئ ترڅو دقیق لوستل ډاډمن شي.
• ملټي میټر په چاودیدونکي ګاز، بخار یا دوړو ډک چاپیریال کې مه چلوئ.
• د هرې اندازې لپاره سم فعالیت او حد وکاروئ.

3. د بسته محتويات

ډاډ ترلاسه کړئ چې ټول توکي په کڅوړه کې شتون لري:

• 1 x BSIDE S10 Digital Multimeter
• د ټیسټ لیډونو 1 x جوړه (سور او تور)
• 1 x د کارونکي لارښود

Note: Batteries (2 x 1.5V AAA) are not included due to aviation security regulations.

Image: The BSIDE S10 Digital Multimeter, test leads, and user manual as included in the package.

4. محصول ختم شوview

The BSIDE S10 Digital Multimeter features a compact design with an EBTN LCD for clear readings and automatic identification of measurement parameters.

4.1 کلیدي ځانګړتیاوې

• EBTN LCD Display: Provides clear, high-contrast readings in various lighting conditions.
• اتوماتیک پیژندنه: Automatically detects and selects the correct measurement range for tested parameters.
• د 9999 شمېرو ښودنه: د دقیق اندازه کولو لپاره لوړ ریزولوشن.
• 3 Results Display: Shows up to three test results simultaneously (e.g., voltage, frequency, and analog bar).
• غیر تماس والیtagد (NCV) کشف: په خوندي ډول د AC حجم کشف کويtagد مستقیم تماس پرته.
• Live Check Function: ژوندي تارونه پیژني.
• رڼا: په کم رڼا لرونکو سیمو کې د کار کولو لپاره مدغم فلش لائټ.
• محافظتي قضیه: Durable case for protection against shocks and bumps.

۲.۱ د وسیلې اجزا

انځور: مخکینۍ برخه view of the BSIDE S10 Digital Multimeter with its red and black test leads connected.

انځور: نږدې انځور view of the EBTN LCD screen, highlighting its clear display of numerical values and icons.

Image: The multimeter display showing three simultaneous results, such as AC voltage او فریکونسۍ.

Image: The BSIDE S10 Multimeter shown with its durable protective case, designed to guard against impacts.

5. ترتیب کول

5.1 د بیټرۍ نصب کول

The BSIDE S10 Multimeter requires two 1.5V AAA batteries (not included) for operation.

1. ډاډ ترلاسه کړئ چې ملټي میټر بند دی.
2. د وسیلې په شا کې د بیټرۍ د برخې پوښ ومومئ.
3. Use a screwdriver (if necessary) or your fingers to open the battery compartment.
4. دوه ۱.۵V AAA بیټرۍ دننه کړئ، د سم قطبیت (+ او -) څارنه وکړئ لکه څنګه چې د خونې دننه ښودل شوي.
5. د بیټرۍ کمپارټ پوښ په خوندي ډول بدل کړئ.

Image: The open battery compartment of the BSIDE S10, showing the placement for two AAA batteries.

6. عملیاتي لارښوونې

The BSIDE S10 features automatic identification for most measurements, simplifying operation. Connect the test leads to the appropriate input jacks (COM and INPUT) before making any measurements.

۸ پاور آن/بند

Press the power button to turn the multimeter on or off. The device may also have an auto-off feature to conserve battery life.

6.2 Automatic Measurement Mode

In its default mode, the multimeter automatically identifies and measures DC Voltage، AC Voltage, Resistance, and Continuity. Simply connect the test leads to the circuit or component, and the meter will display the appropriate reading.

6.3 DC Voltage اندازه کول

• Connect the red test lead to the "INPUT" jack and the black test lead to the "COM" jack.
• Touch the test probes to the positive and negative terminals of the DC voltage سرچینه.
• د DC والیtage reading will be displayed. Range: 0.8V-620V.

6.4 AC Voltage اندازه کول

• Connect the red test lead to the "INPUT" jack and the black test lead to the "COM" jack.
• Touch the test probes to the AC voltage سرچینه.
• د AC voltage reading and frequency will be displayed. Range: 2.2V-620V.

6.5 د مقاومت اندازه کول

• د مقاومت اندازه کولو دمخه ډاډ ترلاسه کړئ چې سرکټ یا برخه غیر انرژي شوې ده.
• Connect the red test lead to the "INPUT" jack and the black test lead to the "COM" jack.
• Touch the test probes across the component to measure its resistance.
• The resistance value will be displayed. Range: 1Ω-60MΩ.

6.6 د ظرفیت اندازه کول

• ډاډ ترلاسه کړئ چې د اندازه کولو دمخه کپیسیټر په بشپړ ډول خارج شوی ترڅو میټر ته زیان ونه رسوي.
• Connect the red test lead to the "INPUT" jack and the black test lead to the "COM" jack.
• د ازموینې پروبونه د کپیسیټر ټرمینلونو ته لمس کړئ.
• The capacitance value will be displayed. Range: 1nF-99.99mF.

6.7 د فریکونسی اندازه کول

Frequency is typically displayed automatically when measuring AC voltage. The range is 1Hz-60KHz.

6.8 د ډایډ ټیسټ

• ډاډ ترلاسه کړئ چې ډایډ له سرکټ څخه جلا شوی دی.
• Connect the red test lead to the "INPUT" jack and the black test lead to the "COM" jack.
• Place the red probe on the anode and the black probe on the cathode. The forward voltage ډراپ به ښکاره شي.
• Reverse the probes. An open circuit (OL) reading indicates a good diode.
• The meter can auto-identify diodes if the voltage ډراپ د 3.0V څخه کم دی.

6.9 د دوام ازموینه

• ډاډ ترلاسه کړئ چې سرکټ غیر انرژي شوی دی.
• Connect the red test lead to the "INPUT" jack and the black test lead to the "COM" jack.
• د ازموینې پروبونه هغه دوه نقطو ته لمس کړئ چې تاسو یې د دوام لپاره چیک کول غواړئ.
• If the resistance is less than 30Ω, the beeper will sound, indicating continuity.

6.10 غیر اړیکه والیومtage (NCV) کشف

• Hold the top of the multimeter near an AC voltage source (e.g., an electrical outlet or insulated wire).
• که AC voltage is detected, the instrument buzzer will alarm, and the screen will display the signal strength.

6.11 Live Check Function

• This function helps identify live wires.
• Place the red test probe into the suspected live terminal.
• If a live wire is detected, an alarm beep will sound, and the LCD screen will display a stripe pattern.

۱۴.۰ د دندې دورې اندازه کول

The duty cycle can be measured for AC voltage signals between 2V-620V. The range is 0.1%-99.9%.

۵.۶ د فلش لائټ فعالیت

Press the flashlight button (if available, usually a dedicated button or a long press of another button) to illuminate the work area in dark environments.

7. مشخصات

8. ساتنه

8.1 پاکول

قضیه د اعلان سره پاک کړئamp ټوکر او نرم صابون. د کثافاتو یا محلولونو څخه کار مه اخلئ. ډاډ ترلاسه کړئ چې وسیله د کارولو دمخه وچه ده.

8.2 د بیټرۍ بدلول

When the low battery indicator appears on the display, replace the batteries as described in Section 5.1. Remove batteries if the device will not be used for an extended period.

۵.۴ د ټیسټ لیډ پاملرنه

Inspect test leads for damage (cuts, cracks, or broken insulation) before each use. Replace damaged leads immediately.

9. ستونزه حل کول

• نه ښودنه: د بیټرۍ نصب کول وګورئ او ډاډ ترلاسه کړئ چې بیټرۍ ختمې شوې نه دي.
• ناسم لوستل: Ensure test leads are properly connected. Verify the correct measurement function is selected (though auto-ranging helps). Replace batteries if low.
• "OL" (اوورلوډ) ښودنه: The measured value exceeds the meter's range for the selected function. Disconnect immediately and select a higher range if applicable, or ensure the circuit is within the meter's capabilities.
• د دوام غږ نشته: Ensure the circuit is de-energized. Check if the resistance is above 30Ω.

10. تضمین او ملاتړ

For warranty information or technical support, please refer to the documentation provided with your purchase or contact BSIDE customer service through their official channels. Keep your purchase receipt as proof of purchase.