د RAB رڼا سلم د تنظیم وړ 30W وال پیک کارونکي لارښود

1. پیژندنه

This user manual provides detailed instructions for the installation, operation, and maintenance of the RAB Lighting Slim Adjustable 30W Wallpack (Model SLIM17FA30ADJ). This high-efficiency LED fixture is designed for outdoor use, offering adjustable light distribution and color temperature options to suit various lighting needs. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Figure 1: RAB Lighting Slim Adjustable 30W Wallpack, showcasing its sleek design and light output area.

2. د خوندیتوب معلومات

Always follow basic safety precautions when installing or working with electrical equipment. Failure to do so may result in serious injury or property damage.

• د بریښنا قطع کول: Ensure power is turned off at the circuit breaker or fuse box before installation, maintenance, or any service.
• وړ برقیان: نصب کول باید د ټولو ملي او محلي بریښنایی کوډونو سره سم د وړ بریښنایی متخصص لخوا ترسره شي.
• ځمکني کول: Properly ground the fixture to avoid electrical shock.
• والیtage مطابقت: تایید کړئ چې د عرضې حجمtage د فکسچر د عملیاتي حجم سره مطابقت لريtage (120-277V).
• Fixture Integrity: Do not operate the fixture if it is damaged. Inspect for shipping damage before installation.
• یوازې بهرنی استعمال: دا محصول یوازې د بیروني کارونې لپاره ډیزاین شوی.

3. ترتیب او نصب کول

The SLIM17FA30ADJ wallpack offers field-adjustable features for optimal performance.

3.1 پورته کول

The fixture is designed for wall mounting. Ensure the mounting surface is structurally sound to support the fixture's weight (approximately 2.99 lbs).

1. په سرکټ بریکر کې بریښنا بنده کړئ.
2. Securely attach the mounting plate to the desired outdoor wall location using appropriate hardware (not included).
3. Connect the electrical wiring (line, neutral, ground) from the supply to the fixture's corresponding wires. Ensure all connections are secure and insulated.
4. Mount the fixture body onto the mounting plate, ensuring a tight seal to maintain its IP65 rating for protection against dust and water jets.

3.2 Field-Adjustable Color Temperature (CCT)

The SLIM17FA30ADJ features an internal switch to select the desired color temperature (CCT) before sealing the fixture. Options include 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White).

• Before final installation, locate the CCT switch inside the fixture.
• Select the desired color temperature by sliding the switch to the corresponding setting.
• Ensure the switch is firmly in place before closing and sealing the fixture.

3.3 Adjustable Cut-off Angle

The fixture allows for adjustment of the light cut-off angle from full cutoff up to 90° in 15° increments. This feature helps direct light precisely where needed and can ensure Dark Sky compliance when set to 0° (full cutoff).

• Refer to the markings on the fixture for angle adjustments.
• Carefully adjust the internal reflector or light engine mechanism to achieve the desired cut-off angle.
• Test the light distribution after adjustment to confirm the setting.

4. عملیاتي لارښوونې

The RAB Lighting Slim Adjustable Wallpack is designed for efficient and automatic operation.

4.1 Automatic Operation (Photocell)

The integrated photocell automatically controls the fixture's on/off cycles based on ambient light levels. The light will turn on at dusk and turn off at dawn, providing energy savings.

• Ensure the photocell sensor is not obstructed by debris, dirt, or external light sources, as this may affect its operation.
• No manual intervention is typically required for daily operation once installed.

۶.۲ د کمولو فعالیت

This fixture supports 0-10V dimming. Connect to a compatible 0-10V dimmer switch (sold separately) for adjustable light output.

• Consult the dimmer switch manufacturer's instructions for wiring and operation.
• Ensure proper wiring of the dimming control wires (purple and gray) to the 0-10V dimmer.

5. ساتنه

The RAB Lighting Slim Adjustable Wallpack requires minimal maintenance due to its durable construction and LED technology.

• پاکول: په دوره یي ډول د فکسچر بهرنۍ برخه د نرم، ډ سره پاکه کړئamp د خاورې او کثافاتو د لرې کولو لپاره ټوکر. د کثافاتو پاکوونکي یا محلول مه کاروئ.
• معاینه: Annually inspect the fixture for any signs of physical damage, loose wiring, or corrosion. Address any issues promptly.
• Photocell: د فوتو سیل سینسر پاک او له خنډونو څخه پاک وساتئ ترڅو د سم اتوماتیک فعالیت ډاډمن شي.
• د کارونکي د خدمت وړ برخې نشته: There are no user-serviceable parts inside the fixture. Do not attempt to open or repair the LED module.

6. ستونزه حل کول

If you experience issues with your RAB Lighting Slim Adjustable Wallpack, refer to the following common problems and solutions:

If troubleshooting steps do not resolve the issue, please contact RAB Lighting customer support.

7. مشخصات

8. تضمین او ملاتړ

RAB Lighting stands behind the quality of its products.

8.1 د تضمین معلومات

For detailed warranty information, please refer to the official RAB Lighting website or the warranty card included with your product. General warranty terms typically cover defects in materials and workmanship under normal use.

8.2 د پیرودونکي ملاتړ

If you have any questions, require technical assistance, or need to report an issue, please contact RAB Lighting customer support:

• Webسایټ: www.rablighting.com
• تلیفون: ته مراجعه وکړئ webد سیمه ایزو اړیکو شمیرو لپاره سایټ.
• When contacting support, please have your product model number (SLIM17FA30ADJ) and purchase date available.