MOES WS-EU3-LW-N 3 Gang WiFi Wall Touch Smart Switch Instruction Manual

1. پیژندنه

Thank you for choosing the MOES 3 Gang WiFi Wall Touch Smart Switch. This device is designed to enhance your home lighting control with smart features, including touch control, app control, voice control, and multi-control association. Please read this manual carefully before installation and use to ensure safe and correct operation.

۱.۱. د خوندیتوب مهم معلومات

• بې طرفه تار ته اړتیا ده: This smart switch requires a neutral wire in your switch box for proper operation. Please confirm its presence before installation.
• 2.4GHz WiFi Network: The switch only supports 2.4 GHz WiFi networks. It is not compatible with 5 GHz networks.
• د ډیمر سویچ نه دی: دا یو آن/آف سویچ دی او د کمېدو فعالیت ملاتړ نه کوي.
• Not a Traditional 3-Way Switch: This switch uses multi-control association via the app for 3-way functionality, not traditional wiring.
• د نصبولو دمخه بریښنا بنده کړئ: Always turn off the circuit breaker before performing any wiring or installation to prevent electric shock.
• د مسلکي نصب کولو وړاندیز شوی: که تاسو د بریښنایی تارونو په اړه ډاډه نه یاست، نو د وړ بریښنایی متخصص سره مشوره وکړئ.
• د مخنیوي څخه ډډه وکړئamp چاپیریالونه: Do not install the switch in damp یا لوند ځایونه.
• له اعظمي بار څخه زیات مه کوئ: Ensure the connected load does not exceed the switch's maximum rating (10 Amps, 2200W/Gang).

Image: Key considerations for MOES smart switch installation, highlighting 2.4GHz WiFi, neutral wire requirement, and non-compatibility with traditional 3-way or dimming functions.

3. د بسته محتويات

• MOES 3 Gang WiFi Wall Touch Smart Switch
• د سکرو نصب کول
• د چټک نصبولو لارښود

4. مشخصات

5. ترتیب او نصب کول

5.1 Tools Used

• د واټر Stripper
• Electric Pen (Voltagای ټیسټر)
• بریښنایی ټیپ
• Wiring Terminal (Wago connectors or similar)
• سکرو ډرایور

5.2 Wiring Diagram and Preparation

Before starting, ensure the circuit breaker is turned off to prevent electric shock. This switch requires a neutral wire. The diagram below illustrates the wiring connections.

انځور: شاته view of the MOES smart switch with labeled terminals for Live (L), Neutral (N), and Load (L1, L2, L3) connections.

Image: Detailed wiring diagram illustrating the connection of Live, Neutral, and three separate lamp wires to the MOES 3 Gang smart switch.

5.3 فزیکي نصب کول

1. د بریښنا بندول: Locate your circuit breaker and turn off the power to the switch you are replacing. Verify power is off using an electric pen.
2. زوړ سویچ لرې کړئ: Carefully remove the faceplate and unscrew the old switch from the wall box. Disconnect the wires, noting their positions.
3. د تارونو نښلول: Connect the Live wire, Neutral wire, and the three Lamp wires to the corresponding terminals on the MOES smart switch as shown in the wiring diagram. Ensure all connections are secure.
4. نوی سویچ نصب کړئ: Gently push the wired switch into the wall box and secure it with screws. Attach the glass panel faceplate.
5. د بریښنا بیرته راګرځول: سرکټ بریکر بیرته فعال کړئ.

5.4 App Pairing (WiFi Link Method)

To enable smart features, you need to pair the switch with the Smart Life/Tuya app.

1. اپلیکیشن ډاونلوډ کړئ: Download the Smart Life or Tuya Smart app from your mobile app store.
2. Enable Bluetooth & WiFi: Ensure your phone is connected to a 2.4GHz WiFi network and Bluetooth is enabled.
3. د جوړه کولو حالت دننه کړئ: Press and hold any button on the smart switch for approximately 6 seconds until the blue indicator light flashes rapidly.
4. په اپلیکیشن کې وسیله اضافه کړئ: Open the Smart Life/Tuya app, tap the '+' icon to add a device. The app should automatically discover the switch. Follow the on-screen prompts to connect.

5.5 RF Pairing (RF Link Method)

This switch supports RF433 remote control (remote not included). To pair with an RF remote:

1. Ensure Switch is Off: Confirm the smart switch is in the OFF state.
2. Enter RF Pairing Mode: Press and hold the desired button on the smart switch for approximately 8 seconds until you hear two 'Di-Di' sounds.
3. د ریموټ تڼۍ فشار ورکړئ: Immediately press the corresponding button on your RF433 remote control. The light connected to the smart switch will toggle ON/OFF, indicating successful pairing.

Note: The key of the remote controller can control the switching of the state of the switch on and off corresponding to the position of the switch.

6. عملیاتي لارښوونې

د ټچ کنټرول

Simply touch the circular icons on the glass panel to toggle the connected lights ON or OFF. The blue backlight indicates the status of each gang.

6.2 App Control (Smart Life/Tuya)

Once paired, you can control your lights from anywhere using the Smart Life/Tuya app on your smartphone. Each gang can be controlled independently.

Image: A smartphone displaying the Smart Life app, demonstrating remote control of the MOES smart switch.

۵.۴ د غږ کنټرول (الیکسا او ګوګل کور)

Integrate your MOES smart switch with Amazon Alexa or Google Home for hands-free voice control. After linking your Smart Life/Tuya account in the Alexa or Google Home app, you can use commands like: "Alexa, turn on the living room light" or "Hey Google, turn off the kitchen lights."

Image: Illustration of voice control functionality with Amazon Alexa and Google Home, showing smart speakers interacting with the MOES smart switch.

6.4 Multi-Control Association (3-Way Functionality)

To achieve 3-way control (two switches controlling one light) without traditional wiring, use the multi-control association feature in the Smart Life/Tuya app. This allows multiple smart switches to control the same light.

1. Ensure both smart switches are added to the same Smart Life/Tuya app.
2. In the app, select the main switch that is wired to the light.
3. Go to its settings and find "Multi-Control Association".
4. Add the second smart switch (the one not wired to the light) to the multi-control group.
5. Now, both switches can control the same light.

Image: Visual guide for setting up multi-control association between two smart switches to operate a single light source.

۷.۲ ټایمر او شمېرنه

Use the Smart Life/Tuya app to set schedules, timers, and countdowns for your lights. This allows for automated control, such as turning lights ON at sunset or OFF after a set duration.

Image: The Smart Life app displaying options for setting timers and countdowns to automate light control with the MOES smart switch.

۷.۳ د ریل حالت د تنظیم وړ

In the app settings, you can configure the relay status after a power outage. Options include ON, OFF, or 'Remember last status' to restore the state prior to the power interruption.

Image: App screenshot showing the relay status setting, allowing users to choose the switch's state after a power interruption.

۷.۴ د شا رڼا فعال/بند کنټرول

The backlight of the touch buttons can be turned ON or OFF via the app settings. This is useful for bedrooms or areas where you prefer no light from the switch.

Image: The MOES smart switch demonstrating the backlight ON and OFF feature, with the corresponding setting visible in the Smart Life app.

6.8 Device Share & Group Control

Share control of your smart switch with family members through the app. You can also create groups to control multiple switches or lights simultaneously with a single command.

Image: The Smart Life app illustrating how to share device control with family and create groups for simultaneous control of multiple MOES smart switches.

6.9 سمارټ اتومات

Create custom automation routines based on various conditions (e.g., time, weather, device status) to make your home truly smart. For example, turn on lights when a motion sensor is triggered.

7. ساتنه

• پاکول: Wipe the glass panel with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• د فرم ویئر تازه معلومات: Keep the Smart Life/Tuya app updated to receive the latest firmware for your switch, ensuring optimal performance and security.
• منظم چکونه: Periodically check the switch for any signs of damage or loose connections.

8. ستونزه حل کول

• سویچ ځواب نه ورکوي: Check if the circuit breaker is ON. Ensure the neutral wire is correctly connected.
• د وای فای سره وصل نشو:
  • ډاډ ترلاسه کړئ چې ستاسو د وای فای شبکه 2.4GHz ده.
  • Ensure your phone is connected to the same 2.4GHz WiFi network.
  • Bring the switch closer to your WiFi router during pairing.
  • Reset the switch to pairing mode (press and hold any button for 6 seconds until the blue indicator flashes rapidly).
• RF Remote Not Working: Ensure the switch is in the OFF state before attempting RF pairing. Repeat the RF pairing steps carefully.
• د څراغونو ځلا: This switch is not a dimmer. Ensure you are using compatible non-dimmable bulbs.

8.1 How to Reset/Re-pair WiFi Code

If you need to reset the WiFi connection or re-pair the switch:

1. Press the switch button for 6 times.
2. On the 6th press, hold the button.
3. Release the button when you hear 'Di-Di-Di' (3 times).
4. The blue indicator on the switch will flash fast after 3 seconds, indicating it's in pairing mode.

9. تضمین او ملاتړ

MOES products come with a standard manufacturer's warranty. For specific warranty details, technical support, or further assistance, please refer to the warranty card included with your product or visit the official MOES website. You can also contact MOES customer service through the Smart Life/Tuya app or their official support channels.