1. پیژندنه
Thank you for choosing the EMKE 300W Heating Element. This product is designed to provide efficient and controlled heating for your bathroom radiators and towel warmers. This manual contains important information regarding the safe installation, operation, and maintenance of your heating element. Please read it thoroughly before use and retain it for future reference.
2. د خوندیتوب لارښوونې
د خوندي عملیاتو ډاډ ترلاسه کولو او د زیان مخنیوي لپاره، مهرباني وکړئ لاندې خوندیتوب احتیاطي تدابیر په پام کې ونیسئ:
- بریښنایی خوندیتوب: Ensure the power supply matches the specifications (220-240V 50Hz). Always disconnect power before installation or maintenance. Installation should be performed by a qualified electrician if you are unsure.
- د اوبو ساتنه: The heating element has an IP44 protection rating, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. However, it should not be submerged in water.
- مناسب نصب کول: The heating element must be installed vertically at the bottom of the radiator/towel warmer. Ensure the G1/2 connection thread is securely sealed to prevent leaks.
- دحرارت درجه: The surface of the heating element and radiator can become hot during operation. Avoid direct contact to prevent burns.
- ماشومان او څاروي: Keep children and pets away from the operating heating element.
- مطلوب استعمال: Use this product only for its intended purpose as a heating element for bathroom radiators and towel warmers.
3. د محصول ب Featuresې
- د بریښنا تولید: 300W, suitable for radiators with a power requirement below 600W.
- مواد: Constructed from high-quality 304 stainless steel for rapid heating, rust resistance, and corrosion resistance.
- مدغم ترموسټاټ: Allows for easy control of heating time and temperature.
- د تنظیم وړ د تودوخې حد: له 30°C څخه تر 70°C پورې.
- د ټیمر فعالیت: Includes 2-hour and 4-hour timer settings.
- د ساتنې درجه: IP44 for splash water protection.
- د کیبل ډیزاین: Spiral cable for neat and flexible connection.
4. مشخصات
| فیچر | مشخصات |
|---|---|
| د ماډل شمیره | THE230W-ADR |
| ځواک | 300 W |
| والیtage | 220-240V 50Hz |
| Heating Bar Size | 392 x Φ12 ملي میتر |
| د کیبل اوږدوالی | ۱.۵ - ۱۳ ملي متره |
| رنګ | سپین |
| مواد | 304 سټینلیس سټیل |
| د ساتنې درجه | IP44 |
| د ساتنې کچه | اول ټولګي |
| د نښلولو تار | G1/2 |
| Max. عملیاتي فشار | 10 بار |
| د محصول ابعاد (L x W x H) | 38 x 6 x 4 سانتي متره |
| د توکي وزن | 480 ګرامه |
5. ترتیب او نصب کول
Before installation, ensure the radiator system is drained and depressurized. The heating element is designed for vertical installation at the bottom of your towel warmer or electric radiator.
- Select the Correct Heating Element: Ensure the 300W heating element is appropriate for your radiator. It is suitable for radiators with a power output below 600W. Refer to the table below for guidance on matching heating element power to radiator heat output.
- ریډیټر چمتو کړئ: Locate the G1/2 connection port at the bottom of your radiator. Ensure it is clean and free of debris.
- Insert the Heating Element: Carefully screw the heating element into the G1/2 connection port. Use appropriate tools to tighten it securely, ensuring a watertight seal. Do not overtighten.
- موقعیت: The heating element must always be mounted at the lowest point of the towel rail/radiator to ensure proper heat distribution and prevent overheating.
- بریښنایی پیوستون: Once the heating element is physically installed, connect the power plug to a suitable 220-240V 50Hz electrical outlet. Ensure the outlet is properly grounded and protected by a residual current device (RCD).
6. عملیاتي لارښوونې
The EMKE heating element features an intuitive control panel with an LCD display for easy temperature and timer adjustments.
- پاور آن/بند: فشار ورکړئ د بریښنا تڼۍ (⏻) to turn the heating element on or off. The LCD display will illuminate when active.
- د حرارت درجه تنظیمول: When the heating element is on, press the Temperature/Time Increase (+) or کمول (-) buttons to set your desired temperature between 30°C and 70°C. The set temperature will be displayed on the LCD.
- د ټایمر تنظیمول: فشار ورکړئ Mode Change button (↶) to cycle through the timer options (2H, 4H, or continuous heating). The selected timer duration will be shown on the LCD. The heating element will operate for the set duration and then turn off automatically.
- دوامداره تودوخه: If no timer is selected, the heating element will operate continuously at the set temperature until manually turned off.
7. ساتنه
Regular maintenance ensures the longevity and efficient operation of your EMKE heating element.
- پاکول: Before cleaning, always unplug the heating element from the power outlet. Use a soft, damp cloth to wipe the surface of the heating element and control panel. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.
- معاینه: Periodically check the power cable for any signs of damage (fraying, cuts). Inspect the connection point to the radiator for any leaks or corrosion. If any damage is found, discontinue use and contact customer support.
- ذخیره کول: If the heating element will not be used for an extended period, unplug it and ensure it is clean and dry before storing.
8. ستونزه حل کول
If you encounter issues with your EMKE heating element, refer to the following common problems and solutions:
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| Heating element does not turn on. | بریښنا نشته. ناقص دکان. | Check if the plug is securely inserted. آوټ لیټ د بل وسیله سره معاینه کړئ. سرکټ بریکر چیک کړئ. |
| Heating element is on but not heating. | د حرارت درجه ډیره ټیټه ده. Air in the radiator system. د حرارتی عنصر خرابوالی. | د ټاکل شوي حرارت درجه لوړه کړئ. Bleed the radiator to remove air. د پیرودونکي ملاتړ سره اړیکه ونیسئ که مسله دوام ومومي. |
| د ټایمر فعالیت د تمې سره سم کار نه کوي. | د ټایمر غلط ترتیب. | Ensure the correct timer duration (2H or 4H) is selected using the Mode Change button. |
| Water leakage at the connection point. | تړلی اړیکه. زیانمن شوی مهر. | Ensure the heating element is securely tightened. Check the G1/2 seal and replace if damaged. Consult a professional if necessary. |
If these solutions do not resolve the issue, please contact EMKE customer support for further assistance.
9. تضمین او ملاتړ
EMKE products are manufactured to high-quality standards. For information regarding warranty coverage and terms, please refer to the documentation provided with your purchase or visit the official EMKE webسایټ
For technical support, troubleshooting assistance, or spare parts inquiries, please contact EMKE customer service. Have your model number (THE230W-ADR) and purchase details ready when contacting support.
EMKE Customer Service: Please refer to your purchase receipt or the EMKE official webستاسو د سیمې لپاره د اړیکو معلوماتو لپاره سایټ.
