د توپخانې هورنیټ 3D پرنټر کارونکي لارښود

1. پیژندنه

Thank you for choosing the Artillery Hornet 3D Printer. This manual provides essential information for the safe and efficient operation of your new 3D printer. Please read this manual thoroughly before operating the device to ensure proper setup, usage, and maintenance. The Artillery Hornet is designed for ease of use, featuring a highly integrated structure and 95% pre-assembly for quick setup.

Figure 1.1: The Artillery Hornet 3D Printer, showcasinد هغې کمپیکٹ او مدغم ډیزاین.

2. د خوندیتوب لارښوونې

Always adhere to the following safety guidelines to prevent injury or damage to the printer:

• د بریښنا رسول: Use only the specified power adapter. Ensure the power outlet is properly grounded.
• عملیاتي چاپیریال: Operate the printer in a well-ventilated area, away from flammable materials, direct sunlight, and excessive humidity. Maintain a stable room temperature.
• ګرمې سطحې: The print nozzle and print bed can reach high temperatures. Avoid touching these components during operation or immediately after use. Allow them to cool down completely before handling.
• خوځنده برخې: د عملیاتو په جریان کې لاسونه، ویښتان او خلاصې جامې د حرکت کونکو برخو څخه لرې وساتئ ترڅو د ګډوډۍ مخه ونیول شي.
• د فلامینټونو اداره کول: Store filament in a dry place to prevent moisture absorption, which can affect print quality.
• ماشومان او څاروي: پرنټر د ماشومانو او څارویو له لاسرسي لرې وساتئ. که ماشومان شتون ولري نو د لویانو څارنه اړینه ده.
• اضطراری ګل کیدنه: Familiarize yourself with the location of the power switch for quick shutdown in case of an emergency.

3. د بسته محتويات

Upon unpacking, please verify that all components are present and undamaged. Due to the 95% pre-assembled design, the number of loose parts is minimal.

• Artillery Hornet 3D Printer (Main Unit)
• د بریښنا کیبل
• فیلامینټ هولډر
• USB کیبل
• Tool Kit (e.g., wrenches, screwdrivers, nozzle cleaning needle)
• Sample Filament
• SD Card / USB Drive (with software and test models)
• د کارونکي لارښود (دا لاسوند)

4. ترتیب کول

The Artillery Hornet is designed for quick assembly, with 95% of the printer pre-assembled. Follow these steps to complete the setup:

1. بسته بندي کول: پرنټر او ټول لوازم په احتیاط سره له بسته بندۍ څخه لرې کړئ. بسته بندۍ د راتلونکي لیږد یا ذخیره کولو لپاره وساتئ.
2. د بیس او ګینټري مجلس: The main gantry structure is largely pre-assembled. Attach the gantry to the base unit using the provided screws. Ensure it is securely fastened.
   

   شکل 4.1: مخکی view of the printer, showing the integrated base and gantry structure.

3. کیبلونه وصل کړئ: Connect the hotend and motor cables to their respective ports. Ensure all connections are firm and correct. Refer to the labels on the cables and ports.
   

   Figure 4.2: Detail of the hotend and extruder, showing cable connections.
4. د فلامینټ هولډر نصب کړئ: Mount the filament holder onto the designated slot on the printer.
5. د بریښنا پیوستون: Connect the power cable to the printer's power input and then to a grounded electrical outlet. Ensure the power switch is in the OFF position before connecting.
   

   شکل 4.3: شاته view of the printer base, highlighting the power input and switch.

6. د چاپ بستر برابرول: The Artillery Hornet features a tempered glass print bed. While often pre-leveled, it's crucial to verify and adjust if necessary for optimal first layer adhesion.
   • پرنټر چالان کړئ.
   • Navigate to the "Leveling" or "Prepare" menu on the LCD screen.
   • Move the nozzle to each corner of the print bed and adjust the leveling knobs underneath the bed until a piece of paper (standard printer paper) can slide with slight friction between the nozzle and the bed.
   • Repeat for all four corners and the center until consistent.

5. عملیاتي لارښوونې

5.1. Software Installation (Slicer)

To prepare 3D models for printing, you will need a slicer software. Popular options include Cura, PrusaSlicer, or Simplify3D. An SD card or USB drive with a recommended slicer profile might be included with your printer. Install the software on your computer and configure it for the Artillery Hornet.

• Install the slicer software from the provided SD card or download the latest version online.
• Add a new printer and select "Artillery Hornet" if available, or configure a custom FDM printer with the following build volume: 220 x 220 x 250 mm.
• Import the recommended printer profile (if provided) or configure basic settings like nozzle diameter (0.4mm), filament diameter (1.75mm), and retraction settings.

5.2. د فیلامینټ بار کول

Follow these steps to load filament into your printer:

1. Place the filament spool onto the filament holder.
2. Preheat the nozzle to the recommended temperature for your filament type (e.g., 200-210°C for PLA). You can do this via the printer's LCD menu (Prepare > Preheat PLA/ABS).
3. فلامینټ د ایکسټروډر د ننوتلو سوري کې دننه کړئ.
4. Gently push the filament until it engages with the extruder gears.
5. Use the "Extrude" or "Load Filament" option from the printer's menu to feed the filament through the hotend until molten plastic comes out of the nozzle. This purges any old filament and ensures a smooth flow.

۲. د چاپ پیل کول

Once your model is sliced and filament is loaded, you can start printing:

1. Save the sliced G-code file to an SD card or USB drive.
2. Insert the SD card/USB drive into the printer's slot.
3. Navigate to the "Print from SD" or "Print" menu on the LCD screen.
4. Select your G-code file له لیست څخه.
5. The printer will begin heating the bed and nozzle, then start the print. Monitor the first layer to ensure proper adhesion.

6. ساتنه

Regular maintenance ensures the longevity and optimal performance of your Artillery Hornet 3D Printer:

• د چاپ بستر پاک کړئ: After each print, allow the bed to cool and carefully remove the printed object. Clean the glass bed with isopropyl alcohol to remove any residue, ensuring good adhesion for future prints.
• نوزل پاک کړئ: Periodically clean the exterior of the nozzle with a brass brush to remove any accumulated plastic. If the nozzle is clogged, use the provided cleaning needle to clear the obstruction while the nozzle is hot.
• غوړول خوځنده برخې: د لیتیم غوړ یا ورته غوړ لږ مقدار د Z-axis لیډ سکرو او نرمو راډونو ته په هرو څو میاشتو کې واچوئ ترڅو د اسانه حرکت ډاډ ترلاسه شي.
• د چیک کمربندونه: Ensure the X and Y axis belts are properly tensioned. They should be taut but not overly tight. Adjust if necessary.
• کیبلونه معاینه کړئ: Regularly check all cables for wear, fraying, or loose connections.
• د فرم ویئر تازه معلومات: رسمي توپخانه وګورئ website for any available firmware updates. Follow the instructions carefully if updating.

7. ستونزه حل کول

دا برخه هغه عامې ستونزې په ګوته کوي چې تاسو ورسره مخ کیدی شئ او د هغوی احتمالي حلونه.

8. مشخصات

Key technical specifications for the Artillery Hornet 3D Printer:

9. تضمین او ملاتړ

For warranty information, technical support, or spare parts inquiries, please refer to the official Artillery webسایټ ته لاړ شئ یا خپل پرچون پلورونکي سره اړیکه ونیسئ. د پیرود ثبوت په توګه د پیرود رسید وساتئ.

آنلاین سرچینې:

• Artillery Official Webسایټ (for product information, drivers, and firmware)
• Product Page on Amazon.com.be