1. پیژندنه
Welcome to the SCULPFUN S9 Laser Engraver user manual. This document provides essential information for the safe and effective operation of your new laser engraving and cutting machine. The SCULPFUN S9 is designed for precision and versatility, capable of engraving and cutting various materials with its powerful 5.5W laser module.
Please read this manual thoroughly before operating the device to ensure proper setup, safe usage, and optimal performance.
The SCULPFUN S9 Laser Engraver, showcasinد هغې ډیزاین او سابقهamples of engraved and cut items.
2. د خوندیتوب معلومات
WARNING: Laser radiation can cause eye damage and skin burns. Always follow safety precautions.
- د سترګو ساتنه: The SCULPFUN S9 features a laser filter cover that can filter 98% of ultraviolet light, allowing observation of engraving without safety glasses. However, it is highly recommended to wear additional certified laser safety glasses during operation to ensure maximum protection.
- اضطراري تمځای: The machine is equipped with a main switch for emergency power off. Familiarize yourself with its location and operation before use.
- د اور خطر: Laser engraving and cutting can generate heat and sparks, posing a fire risk. Always operate the machine in a well-ventilated area, away from flammable materials. The A4-sized steel base can protect your table from laser damage and isolate fire risk.
- وینټیلیشن: Ensure adequate ventilation to dissipate fumes and smoke produced during engraving and cutting.
- څارنه: د عملیاتو په جریان کې هیڅکله د لیزر نقاش بې پامه مه پریږدئ.
- ماشومان او څاروي: Keep children and pets away from the operating area. The laser point can attract attention and cause harm.
The laser module with its protective cover, designed to filter harmful light.
3. د محصول ب Featuresې
- 90W Effect Ultra-fine Laser Beam: Utilizes the latest 5.5W laser diode technology with an ultra-fine 0.06mm sharp laser focus, providing high penetration depth and precision for both engraving and cutting.
- Fast Focus Design: Features the fastest focusing design. Simply slide the laser module and tighten the screws to achieve focus.
- Robust Full-Metal Structure: The all-metal frame design ensures extreme sturdiness and improves engraving accuracy.
- Integrated Measuring Scales: X and Y axes include precise scale lines for easy measurement of engraved objects.
- پراخه مطابقت: Compatible with popular engraving software such as LaserGRBL, LightBurn, Benbox, GrblController, and Litefire. Supports PWM mode engraving.
- د عملیاتي سیسټم ملاتړ: Works with Windows and Mac systems.
- ملاتړ شوی File بڼې: JPG, PNG, DXF, SVG, G-Code, NC, BMP, etc.
- Large Engraving Area: Offers a generous working area of 410 x 420 mm to meet diverse engraving and cutting requirements.
Illustration of the laser beam shaping technology for ultra-fine engraving.
Demonstration of the SCULPFUN S9's cutting power on wood and acrylic.
Various materials suitable for engraving and cutting with the SCULPFUN S9, including wood, leather, acrylic, steel, and cloth.
4. د بسته محتويات
Upon unpacking, please verify that all components are present and undamaged. The standard package for the SCULPFUN S9 Laser Engraver typically includes:
- Laser Engraver Frame Components (X-axis, Y-axis, support legs)
- د لیزر ماډل
- د بریښنا اډاپټر او کیبل
- د USB ډیټا کیبل
- Safety Glasses (recommended for additional protection)
- A4 Steel Backing Plate
- د مجلس وسیلې او پیچ
- د کارونکي لارښود (دا لاسوند)
5. ترتیب کول
The SCULPFUN S9 is designed for quick and easy assembly, typically taking 10 to 20 minutes. Follow these general steps for setup:
- اجزا خلاص کړئ: په احتیاط سره ټولې برخې له بسته بندۍ څخه لرې کړئ او په پاکه، فلیټ سطحه یې واچوئ.
- چوکاټ راټول کړئ: Connect the X and Y axis components to form the rectangular frame. Ensure all connections are secure.
- د ملاتړ پښې وصل کړئ: Secure the four support legs to the corners of the frame.
- د لیزر ماډل نصب کړئ: Mount the laser module onto the X-axis carriage. Ensure it slides smoothly along the rail.
- کیبلونه وصل کړئ: Connect the power cable to the machine and a suitable power outlet. Connect the USB data cable from the machine to your computer.
- Place Steel Plate: Position the A4 steel backing plate under the working area to protect your surface.
Visual guide for the fast assembly process of the SCULPFUN S9.
6. عملیاتي لارښوونې
Operating the SCULPFUN S9 involves preparing your design, setting up the machine, and initiating the engraving or cutting process through compatible software.
۴.۴ د سافټویر نصب او پیوستون
The SCULPFUN S9 is compatible with various software. It is recommended to use LaserGRBL (free) or LightBurn (paid, highly recommended for advanced features). Download and install your preferred software on your Windows or Mac system.
Once installed, connect the engraver to your computer via the USB cable. The software should detect the device. Refer to the software's specific documentation for detailed connection and setup procedures.
The SCULPFUN S9 supports various software, including LaserGRBL and LightBurn, for broad compatibility.
۴.۲ د لیزر تمرکز کول
Accurate focusing is crucial for optimal engraving and cutting results. The SCULPFUN S9 features a quick-focus design:
- Place the material you wish to engrave or cut on the working surface.
- Loosen the screws on the laser module that allow it to slide vertically.
- Lower the laser module until the focus point (usually a small red dot or crosshair) is sharp and clear on the surface of your material.
- Tighten the screws to secure the laser module in place.
6.3 Preparing Your Design and Engraving
- د وارداتو ډیزاین: Open your chosen software (e.g., LightBurn) and import your design file (JPG, PNG, DXF, SVG, G-Code, NC, BMP).
- د موقعیت مواد: Place your material on the engraver's bed. Use the precise scale lines on the X and Y axes to accurately position your material and measure its size.
- پیرامیټونه تنظیم کړئ: Adjust engraving/cutting parameters such as power, speed, and passes within the software based on your material and desired outcome. Refer to online resources or test cuts for recommended settings for different materials.
- Frame the Job: Use the software's framing function to preview the laser's path and ensure your design fits within the material.
- نقاشي/پرې کول پیل کړئ: Once satisfied with the setup, initiate the process from the software. Monitor the machine closely during operation.
The large 410x420mm engraving area with integrated measuring rules for precise object placement.
7. ساتنه
Regular maintenance ensures the longevity and optimal performance of your SCULPFUN S9 Laser Engraver.
- پاک لیزر لینز: Periodically clean the laser lens with a soft, lint-free cloth and a small amount of isopropyl alcohol. Ensure the machine is off and unplugged before cleaning.
- Inspect and Tighten Screws: Over time, vibrations can loosen screws. Regularly inspect all screws and connections on the frame and laser module, tightening them as needed.
- Clean Rails and Belts: Keep the X and Y axis rails and belts free from dust and debris to ensure smooth movement of the laser module.
- په سمه توګه ذخیره کول: کله چې په کارولو کې نه وي، نقاش په پاک، وچ چاپیریال کې وساتئ، د مستقیم لمر وړانګو او سختې تودوخې څخه لرې.
8. ستونزه حل کول
This section addresses common issues you might encounter with your SCULPFUN S9 Laser Engraver.
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| ماشین نه چلیږي | Loose power connection, faulty power adapter, emergency stop engaged. | Check all power connections. Ensure the emergency stop switch is disengaged. Test power adapter if possible. |
| لیزر نه چلېږي یا کمزوری محصول | Incorrect focus, dirty lens, low power setting in software, laser module issue. | Re-focus the laser. Clean the laser lens. Increase power setting in software. Contact support if laser module is suspected faulty. |
| Engraving/cutting is inaccurate or distorted | Loose belts, loose screws on frame, material shifting, incorrect software settings. | Check and tighten belts and frame screws. Secure material firmly. Verify software settings (speed, acceleration). |
| Software not connecting to machine | Incorrect USB driver, wrong COM port selected, machine not powered on. | Install necessary USB drivers. Select the correct COM port in software. Ensure machine is powered on. Try a different USB port or cable. |
| Machine attempts to move beyond limits (no end stops) | Software settings not configured for working area, user error. | Carefully define your working area in the software. Always use the 'Frame' function to preview the job boundaries before starting. Manually position the laser head to a safe starting point. |
9. مشخصات
- د محصول ابعاد (L x W x H): 41 x 41 x 42 سانتي متره
- د محصول وزن: ۷ کیلوګرامه
- د ماډل حواله: CJM-3705-014255-08E0B-1120
- د موادو ډول: Silicone Oxide (frame components)
- د بریښنا سرچینه: د بریښنا تار شوی
- والیtage: 12 ولټه
- د لیزر تولید ځواک: 5.5W (90W effect)
- د نقاشۍ ساحه: 410 x 420 mm
- UPC: 860013771195
10. تضمین او ملاتړ
SCULPFUN products are designed for reliability and performance. While specific warranty details are not provided in this manual, SCULPFUN is known for responsive customer service. If you encounter any issues or require technical assistance, please contact SCULPFUN customer support through their official channels or the retailer where you purchased the product.
When contacting support, please have your model number (CJM-3705-014255-08E0B-1120) and a detailed description of the issue ready. Providing photos or videos can also assist in faster resolution.
