SCULPFUN S30 5.5W Laser Engraver and Cutter User Manual

۱.۱. د خوندیتوب مهم معلومات

Please read all safety instructions carefully before operating the SCULPFUN S30 laser engraver. Failure to follow these instructions may result in injury or damage to the device.

• د لیزر خوندیتوب: This device uses a Class 2 laser. Never look directly into the laser beam. Always wear the provided laser safety glasses during operation.
• د سترګو ساتنه: Always wear appropriate laser safety glasses to protect your eyes from direct or reflected laser light.
• وینټیلیشن: Operate the laser engraver in a well-ventilated area to avoid inhaling fumes and smoke produced during engraving or cutting.
• د موادو خوندیتوب: Only engrave or cut materials specified as safe for laser processing. Avoid highly reflective, flammable, or unknown materials.
• د اور خطر: The laser can ignite flammable materials. Do not leave the machine unattended during operation. Keep a fire extinguisher nearby.
• ماشومان او څاروي: Keep children and pets away from the operating area. This device is not a toy.
• اضطراري تمځای: د بیړني تمځای تڼۍ د موقعیت او عملیاتو سره ځان بلد کړئ.

2. د بسته محتويات

Verify that all components are present in your package before assembly. If any parts are missing or damaged, please contact customer support.

Image: All components included in the SCULPFUN S30 package, laid out for inspection.

• Laser Engraver Frame Assembly
• S9 Laser Module (5.5W)
• د بریښنا اډاپټر او کیبل
• USB کیبل
• د لیزر خوندیتوب شیشې
• د وسایلو کټ (رنچونه، هیکس کیلي)
• Air Assist Nozzle (if included in your specific model)
• Test Materials (wood, metal sheet)
• د کارونکي لارښود (دا لاسوند)

3. د تنظیم کولو لارښود

Follow these general steps to assemble your SCULPFUN S30 laser engraver. Refer to the detailed assembly instructions provided in the box for specific diagrams and fastener details.

Image: The fully assembled SCULPFUN S30 laser engraver, ready for operation.

1. اجزا خلاص کړئ: په احتیاط سره د بسته بندۍ ټولې برخې لرې کړئ او د بسته بندۍ د منځپانګې لیست سره سم یې تایید کړئ.
2. د چوکاټ راټولول: د المونیم پرو سره وصل کړئfiles to form the main frame of the engraver. Ensure all screws are tightened securely.
3. Install X and Y Axis: Mount the X-axis and Y-axis gantry components onto the frame. Ensure smooth movement along both axes.
4. Mount Laser Module: Attach the S9 laser module to the X-axis carriage. Ensure it is firmly secured and the laser focus is correctly set (refer to specific instructions for focusing).
5. د تار نښلول: Connect the motor cables, limit switch cables, and laser module cable to the control board. Double-check all connections.
6. د بریښنا پیوستون: Connect the power adapter to the engraver and then to a suitable power outlet.
7. د سافټویر نصب کول: Install the recommended laser control software (e.g., LaserGRBL, LightBurn) on your computer. Drivers may be required.

4. عملیاتي لارښوونې

دا برخه عمومي اوور وړاندې کويview of operating your SCULPFUN S30. Detailed software-specific instructions can be found in the respective software manuals.

انځور: مختلف پخوانيamples of items that can be engraved with the SCULPFUN S30, including wood, metal, and leather.

1. د کار ځای چمتو کول: Ensure your workspace is clean, well-ventilated, and free of flammable materials. Place the material to be engraved or cut on the work surface.
2. کمپیوټر سره وصل کړئ: Connect the engraver to your computer via the USB cable.
3. پاور آن: Turn on the power switch on the engraver.
4. سافټویر پیل کړئ: Open your chosen laser control software (e.g., LaserGRBL, LightBurn).
5. د بار ډیزاین: Import your desired image or design file په سافټویر کې.
6. تنظیمات تنظیم کړئ: Set the laser power, speed, and number of passes according to your material and desired effect. Refer to material test guides for optimal settings.
7. Focus Laser: Manually adjust the laser module height to achieve the smallest possible laser spot on the material surface. The S9 laser module features advanced beam shaping technology for a finer spot.


Image: Diagram illustrating the S9 laser's beam shaping technology, which creates a thinner, higher energy density beam (0.06mm) compared to ordinary square lasers (0.23mm).

8. د موقعیت مواد: Use the software to jog the laser head and confirm the engraving area on your material.
9. د عملیاتو پیل: Ensure you are wearing safety glasses. Initiate the engraving or cutting process from the software. Monitor the process closely.
10. بندول: Once complete, power off the engraver and disconnect it from the computer.

5. ساتنه

Regular maintenance ensures optimal performance and extends the lifespan of your SCULPFUN S30.

• د لینز پاکول: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain laser power and precision.
• د ریلونو او څرخونو پاکول: Keep the guide rails and wheels free of dust and debris to ensure smooth movement of the laser head. Use a dry cloth or compressed air.
• غوړول خوځنده برخې: Apply a small amount of lubricant to the guide rails and lead screws as needed to reduce friction.
• د چیک کمربندونه: Inspect the timing belts for tension and wear. Adjust or replace if necessary.
• Laser Module Lifespan: The S9 laser module is designed for a long service life of approximately 15,000 hours. Proper maintenance can help achieve this.


Image: Close-up of the SCULPFUN S9 laser module, highlighting its sealed, durable design and 15,000-hour service life.

6. ستونزه حل کول

If you encounter issues with your SCULPFUN S30, refer to the following common problems and solutions:

• د لیزر محصول نشته:
  • Check if the laser module is properly connected and powered.
  • Ensure the laser safety key (if present) is in the 'on' position.
  • Verify laser power settings in the software.
• Engraving/Cutting Not Deep Enough:
  • Check laser focus. The laser spot should be as small as possible.
  • Increase laser power or reduce engraving speed in the software.
  • Increase the number of passes.
  • Ensure the material is suitable for laser processing. The S30 can cut up to 15mm wood, 10mm plywood, and 10mm acrylic.


Image: Demonstrates the cutting capabilities of the SCULPFUN S30, showing successful cuts through 15mm wood, 10mm plywood, and 10mm acrylic.

• Machine Not Connecting to Computer:
  • Verify USB cable connection.
  • Check if the correct COM port is selected in the software.
  • Reinstall USB drivers if necessary.
• ناسم نقاشي/پرې کول:
  • Check for loose belts or pulleys.
  • Ensure the frame is rigid and not wobbling.
  • Verify material is securely placed and not shifting.

For further assistance, please contact SCULPFUN customer support.

7. مشخصات

8. تضمین او ملاتړ

SCULPFUN products are designed for reliability and performance. For warranty information, please refer to the documentation included with your purchase or visit the official SCULPFUN webسایټ

If you require technical support, have questions about operation, or need assistance with troubleshooting, please contact SCULPFUN customer service through their official channels. Provide your product model (S30) and purchase details for faster service.

For the latest information and resources, please visit the official SCULPFUN webسایټ: www.sculpfun.com